Nissan Pathfinder. Manual — part 743
FRONT ROOM/MAP LAMP ASSEMBLY
INL-59
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
Visually check the metal clips and pawls for deformation and damage during installation. Replace with
new ones if necessary.
Bulb or Lens Replacement
INFOID:0000000009723955
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.
CAUTION:
Do not attempt to seperate the LED bulb from the front room/map lamp assembly or damage to the
components may occur
The LED bulb is replaced as part of the front room/map lamp assembly. Refer to
INL-60
< REMOVAL AND INSTALLATION >
VANITY LAMP
VANITY LAMP
Exploded View
INFOID:0000000009175455
Removal and Installation
INFOID:0000000009175456
CAUTION:
Do not attempt to separate the vanity lamp from the sun visor or damage to the components may
occur.
The vanity lamp is replaced as part of the sun visor. Refer to
INT-27, "Removal and Installation"
.
Bulb or Lens Replacement
INFOID:0000000009175457
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from
bulb surface.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may
affect the performance of lamp.
• Do not attempt to separate the vanity lamp from the sun visor or damage to the components may
occur.
1. Insert a suitable tool into the gap between the lens and vanity lamp, then gently release the lens pawls
and remove.
2. Grasp the bulb and pull straight out of the vanity lamp to remove.
3. Install vanity lamp bulb to vanity lamp.
4. Install the vanity lamp lens.
1.
Lens
2.
Bulb
Pawl
ALLIA1083ZZ
GLOVE BOX LAMP
INL-61
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
GLOVE BOX LAMP
Exploded View
INFOID:0000000009175458
Bulb Replacement
INFOID:0000000009175459
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from
bulb surface.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may
affect the performance of lamp.
1. Remove glove box. Refer to
IP-26, "Removal and Installation"
.
2. Rotate the bulb socket counterclockwise and remove.
3. Grasp the bulb and pull straight out of the bulb socket to remove.
4. Install glove box lamp bulb to bulb socket.
5. Insert bulb socket into glove box and rotate clockwise to lock in position.
6. Install glove box. Refer to
IP-26, "Removal and Installation"
.
1.
Glove box assembly
2.
Bulb
3.
Bulb socket
ALLIA1084ZZ
INL-62
< REMOVAL AND INSTALLATION >
FOOT LAMP
FOOT LAMP
DRIVER SIDE
DRIVER SIDE : Exploded View
INFOID:0000000009175460
DRIVER SIDE : Removal and Installation
INFOID:0000000009175461
The foot lamp housing is replaced as part of the instrument lower panel LH. Refer to
DRIVER SIDE : Bulb Replacement
INFOID:0000000009175462
WARNING:
Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from
bulb surface.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may
affect the performance of lamp.
1. Remove instrument lower panel LH. Refer to
IP-25, "Removal and Installation"
.
2. Rotate the bulb socket counterclockwise and remove.
3. Grasp the bulb and pull straight out of the bulb socket to remove.
4. Install foot lamp bulb to bulb socket.
5. Insert bulb socket into foot lamp housing and rotate clockwise to lock in position.
6. Install the instrument lower panel LH. Refer to
IP-25, "Removal and Installation"
PASSENGER SIDE
1.
Bulb socket
2.
Instrument lower panel LH
3.
Foot lamp housing
4.
Bulb
AWLIA1975ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст