Nissan Pathfinder. Manual — part 373
DLK-258
< SYMPTOM DIAGNOSIS >
AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE
AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE
ALL SWITCHES
ALL SWITCHES : Description
INFOID:0000000009175835
Automatic back door open/close function does not operate using all switches.
NOTE:
Automatic back door open/close operation condition is extremely complicated. During operating confirmations,
reconfirm the list above twice in order to ensure proper operation. Refer to
ALL SWITCHES : Diagnosis Procedure
INFOID:0000000009175836
1.
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL MODULE
Check that DTC is not detected with automatic back door control module.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK BACK DOOR AUTO CLOSURE FUNCTION
Check back door auto closure function.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Refer to
DLK-261, "OPEN/CLOSURE FUNCTION : Diagnosis Procedure"
.
3.
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check automatic back door control module power supply and ground circuit.
DLK-117, "Diagnosis Procedure"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK GROUND CIRCUIT
Check automatic back door control module ground circuit.
DLK-144, "Diagnosis Procedure"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK TOUCH SENSOR LH
Check touch sensor LH.
DLK-126, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
CHECK TOUCH SENSOR RH
Check touch sensor RH.
DLK-123, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Repair or replace the malfunctioning parts.
7.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
1. Replace automatic back door control module. Refer to
DLK-321, "Removal and Installation"
.
2. Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE
DLK-259
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
AUTOMATIC BACK DOOR SWITCH
AUTOMATIC BACK DOOR SWITCH : Description
INFOID:0000000009175837
Automatic back door open/close function does not operate using automatic back door switch.
NOTE:
Automatic back door open/close operation condition is extremely complicated. During operating confirmations,
reconfirm the list above twice in order to ensure proper operation. Refer to
AUTOMATIC BACK DOOR SWITCH : Diagnosis Procedure
INFOID:0000000009175838
1.
CHECK AUTOMATIC BACK DOOR SWITCH
Check automatic back door switch.
DLK-211, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
1. Replace automatic back door control module. Refer to
DLK-321, "Removal and Installation"
.
2. Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
AUTOMATIC BACK DOOR CLOSE SWITCH
AUTOMATIC BACK DOOR CLOSE SWITCH : Description
INFOID:0000000009175839
Automatic back door open/close function does not operate using automatic back door close switch.
NOTE:
Automatic back door open/close operation condition is extremely complicated. During operating confirmations,
reconfirm the list above twice in order to ensure proper operation. Refer to
AUTOMATIC BACK DOOR CLOSE SWITCH : Diagnosis Procedure
INFOID:0000000009175840
1.
CONFIRM THE OPERATION
1. Turn ON automatic back door main switch.
2. Confirm the operation.
Is the result normal?
YES
>> Automatic back door system is normal.
NO
>> GO TO 2.
2.
CHECK AUTOMATIC BACK DOOR CLOSE SWITCH
Check automatic back door close switch.
DLK-207, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK AUTOMATIC BACK DOOR MAIN SWITCH
Check automatic back door main switch.
DLK-209, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
DLK-260
< SYMPTOM DIAGNOSIS >
AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE
1. Replace automatic back door control module. Refer to
DLK-321, "Removal and Installation"
.
2. Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
INTELLIGENT KEY
INTELLIGENT KEY : Description
INFOID:0000000009175841
Automatic back door open/close function does not operate using Intelligent Key.
NOTE:
Automatic back door open/close operation condition is extremely complicated. During operating confirmations,
reconfirm the list above twice in order to ensure proper operation. Refer to
INTELLIGENT KEY : Diagnosis Procedure
INFOID:0000000009175842
1.
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL MODULE
Check that DTC is not detected with automatic back door control module.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK DTC WITH BCM
Check that DTC is not detected with BCM
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
3.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent Key button?
YES
>> GO TO 4.
NO
>> Refer to
DLK-238, "Diagnosis Procedure"
.
4.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
1. Replace automatic back door control module. Refer to
DLK-321, "Removal and Installation"
.
2. Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
BACK DOOR OPENER SWITCH
BACK DOOR OPENER SWITCH : Description
INFOID:0000000009175843
Automatic back door open/close function does not operate using back door opener switch.
NOTE:
Automatic back door open/close operation condition is extremely complicated. During operating confirmations,
reconfirm the list above twice in order to ensure proper operation. Refer to
BACK DOOR OPENER SWITCH : Diagnosis Procedure
INFOID:0000000009175844
1.
CONFIRM THE OPERATION
1. Turn ON automatic back door main switch.
2. Confirm the operation.
Is the result normal?
YES
>> Automatic back door system is normal.
NO
>> GO TO 2.
AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE
DLK-261
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2.
CHECK AUTOMATIC BACK DOOR MAIN SWITCH
Check automatic back door main switch.
DLK-209, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
DLK-199, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
1. Replace automatic back door control module. Refer to
DLK-321, "Removal and Installation"
.
2. Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
OPEN/CLOSURE FUNCTION
OPEN/CLOSURE FUNCTION : Description
INFOID:0000000009175845
Back door auto closure function does not operate when back door opening and closing operations are per-
formed.
OPEN/CLOSURE FUNCTION : Diagnosis Procedure
INFOID:0000000009175846
1.
CONFIRM THE OPERATION
1. Turn ON automatic back door main switch.
2. Confirm the operation.
Is the result normal?
YES
>> Automatic back door system is normal.
NO
>> GO TO 2.
2.
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL MODULE
Check that DTC is not detected with automatic back door control module.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
3.
CHECK AUTOMATIC BACK DOOR MAIN SWITCH
Check automatic back door main switch.
DLK-209, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK BACK DOOR OPENER SWITCH
Check back door opener switch.
DLK-199, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст