Nissan Pathfinder. Manual — part 372
DLK-254
< SYMPTOM DIAGNOSIS >
TAKE AWAY WARNING DOES NOT OPERATE
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
KEY ID WARNING DOES NOT OPERATE
DLK-255
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
KEY ID WARNING DOES NOT OPERATE
Description
INFOID:0000000009175830
Key ID warning function does not operate for vehicle with information display models.
NOTE:
Warning functions operating condition is extremely complicated. During operating confirmations, reconfirm the
list above twice in order to ensure proper operation. Refer to
DLK-34, "WARNING FUNCTION : System
.
Diagnosis Procedure
INFOID:0000000009175831
1.
CHECK DTC WITH BCM
Check that DTC is not detected with BCM.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK DTC WITH COMBINATION METER
Check that DTC is not detected with combination meter.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
3.
CHECK INTELLIGENT KEY
Check Intelligent Key.
DLK-203, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
.
.
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
REPLACE BCM
• Replace BCM. Refer to
BCS-80, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
DLK-256
< SYMPTOM DIAGNOSIS >
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
INTELLIGENT KEY LOW BATTERY WARNING DOES NOT OPERATE
Description
INFOID:0000000009175832
Intelligent Key low battery warning does not operate for vehicle with information display models.
NOTE:
Warning functions operating condition is extremely complicated. During operating confirmations, reconfirm the
list above twice in order to ensure proper operation. Refer to
DLK-34, "WARNING FUNCTION : System
.
Diagnosis Procedure
INFOID:0000000009175833
1.
CHECK DTC WITH BCM
Check that DTC is not detected with BCM.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
2.
CHECK DTC WITH COMBINATION METER
Check that DTC is not detected with combination meter.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Perform trouble diagnosis relevant to DTC indicated.
3.
CHECK “LO- BATT OF KEY FOB WARN” SETTING IN “WORK SUPPORT”
1. Select “INTELLIGENT KEY” of “BCM”.
2. Select “LO- BATT OF KEY FOB WARN” in “WORK SUPPORT” mode.
3. Check “LO- BATT OF KEY FOB WARN” setting in “WORK SUPPORT”.
BCS-21, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Set “ON” in “LO- BATT OF KEY FOB WARN”.
4.
CHECK INTELLIGENT KEY
Check Intelligent Key.
DLK-203, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CHECK INSIDE KEY ANTENNA
Check inside key antenna.
• Instrument center: Refer to
.
• Console: Refer to
• Luggage room: Refer to
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace the malfunctioning parts.
6.
REPLACE BCM
• Replace BCM. Refer to
BCS-80, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
DOOR LOCK OPERATION WARNING DOES NOT OPERATE
DLK-257
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
DOOR LOCK OPERATION WARNING DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000009175834
1.
CHECK DOOR LOCK FUNCTION
Check door lock function.
Does door lock/unlock using door request switch?
YES
>> GO TO 2.
NO
>> Refer to
DLK-235, "ALL DOOR REQUEST SWITCHES : Diagnosis Procedure"
2.
CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
DLK-201, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
REPLACE BCM
• Replace BCM. Refer to
BCS-80, "Removal and Installation"
.
• Confirm the operation after replacement.
Is the result normal?
YES
>> Inspection End.
NO
>> Check intermittent incident. Refer to
GI-49, "Intermittent Incident"
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст