Nissan Pathfinder. Manual — part 209
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-25
< SYSTEM DESCRIPTION >
[BCM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
IMMU
IMMU : CONSULT Function (BCM - IMMU)
INFOID:0000000009174884
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
SELF DIAGNOSTIC RESULT
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
BATTERY SAVER
BATTERY SAVER : CONSULT Function (BCM - BATTERY SAVER)
INFOID:0000000009174885
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
DATA MONITOR
Monitor Item [Unit]
Description
CONFRM ID ALL [Yet/DONE]
Switches to DONE when an Intelligent Key is registered.
CONFIRM ID4 [Yet/DONE]
CONFIRM ID3 [Yet/DONE]
CONFIRM ID2 [Yet/DONE]
CONFIRM ID1 [Yet/DONE]
TP 4 [Yet/DONE]
DONE indicates the number of Intelligent Key ID which has been registered.
TP 3 [Yet/DONE]
TP 2 [Yet/DONE]
TP 1 [Yet/DONE]
PUSH SW [On/Off]
Indicates condition of push-button ignition switch.
Test Item
Description
THEFT IND
This test is able to check security indicator operation [On/Off].
Support Item
Setting
Description
CONFIRM DONGLE ID
—
Dongle ID can be checked.
Monitor Item [Unit]
Description
REQ SW -DR [On/Off]
Indicates condition of door request switch LH.
REQ SW -AS [On/Off]
Indicates condition of door request switch RH.
PUSH SW [On/Off]
Indicates condition push-button ignition switch.
UNLK SEN -DR [On/Off]
Indicates condition of door unlock sensor.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
BCS-26
< SYSTEM DESCRIPTION >
[BCM]
DIAGNOSIS SYSTEM (BCM)
ACTIVE TEST
TRUNK
TRUNK : CONSULT Function (BCM - TRUNK)
INFOID:0000000009174886
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
DATA MONITOR
THEFT ALM
THEFT ALM : CONSULT Function (BCM - THEFT ALM)
INFOID:0000000009174887
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
DATA MONITOR
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
DOOR SW-BK [On/Off]
Indicates condition of back door switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
RKE-LOCK [On/Off]
Indicates condition of lock signal from Intelligent Key.
RKE-UNLOCK [On/Off]
Indicates condition of unlock signal from Intelligent Key.
Monitor Item [Unit]
Description
Test item
Description
BATTERY SAVER
This test is able to check battery saver operation [On/Off].
Monitor Item [Unit]
Description
PUSH SW [On/Off]
Indicates condition of push-button ignition switch.
UNLK SEN -DR [On/Off]
Indicates condition of door unlock sensor.
VEH SPEED 1 [km/h]
Indicates vehicle speed signal received from ABS on CAN communication line.
TR/BD OPEN SW [On/Off]
Indicates condition of back door opener switch.
RKE-TR/BD [On/Off]
Indicates condition of back door open signal from Intelligent Key.
Monitored Item
Description
REQ SW -DR [On/Off]
Indicates condition of door request switch LH.
REQ SW -AS [On/Off]
Indicates condition of door request switch RH.
REQ SW-BD/TR [On/Off]
Indicates condition of back door request switch.
PUSH SW [On/Off]
Indicates condition of push-button ignition switch.
UNLK SEN -DR [On/Off]
Indicates condition of door unlock sensor.
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
BCS
DIAGNOSIS SYSTEM (BCM)
BCS-27
< SYSTEM DESCRIPTION >
[BCM]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ACTIVE TEST
WORK SUPPORT
RETAINED PWR
RETAINED PWR : CONSULT Function (BCM - RETAINED PWR)
INFOID:0000000009174888
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
DATA MONITOR
SIGNAL BUFFER
SIGNAL BUFFER : CONSULT Function (BCM - SIGNAL BUFFER)
INFOID:0000000009174889
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
DATA MONITOR
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
DOOR SW-RR [On/Off]
Indicates condition of rear door switch RH.
DOOR SW-RL [On/Off]
Indicates condition of rear door switch LH.
DOOR SW-BK [On/Off]
Indicates condition of back door switch.
CDL LOCK SW [On/Off]
Indicates condition of lock signal from door lock and unlock switch.
CDL UNLOCK SW [On/Off]
Indicates condition of unlock signal from door lock and unlock switch.
KEY CYL LK-SW [On/Off]
Indicates condition of lock signal from door key cylinder switch.
KEY CYL UN-SW [On/Off]
Indicates condition of unlock signal from door key cylinder switch.
TR/BD OPEN SW [On/Off]
Indicates condition of back door opener switch.
RKE-LOCK [On/Off]
Indicates condition of lock signal from Intelligent Key.
RKE-UNLOCK [On/Off]
Indicates condition of unlock signal from Intelligent Key.
RKE-TR/BD [On/Off]
Indicates condition of back door open signal from Intelligent Key.
Monitored Item
Description
Test Item
Description
FLASHER
This test is able to check turn signal lamp operation [LH/RH/Off].
THEFT IND
This test is able to check security indicator lamp operation [On/Off].
VEHICLE SECURITY HORN
This test is able to check vehicle security horn operation [On].
HEADLAMP(HI)
This test is able to check vehicle security lamp operation [On].
Support Item
Setting
Description
SECURITY ALARM SET
On
Security alarm ON.
Off
Security alarm OFF.
Monitor Item [Unit]
Description
DOOR SW-DR [On/Off]
Indicates condition of front door switch LH.
DOOR SW-AS [On/Off]
Indicates condition of front door switch RH.
BCS-28
< SYSTEM DESCRIPTION >
[BCM]
DIAGNOSIS SYSTEM (BCM)
AIR PRESSURE MONITOR
AIR PRESSURE MONITOR : CONSULT Function (BCM-AIR PRESSURE MONITOR)
INFOID:0000000009174890
CAUTION:
After disconnecting the CONSULT vehicle interface (VI) from the data link connector, the ignition must
be cycled OFF
→ ON (for at least 5 seconds) → OFF. If this step is not performed, the BCM may not go
to ”sleep mode”, potentially causing a discharged battery and no-start condition.
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
• Check Intelligent Key relative signal strength
• Confirm vehicle Intelligent Key antenna signal strength
SELF DIAGNOSTIC RESULT
NOTE:
Before performing Self Diagnostic Result, be sure to register the transmitter ID or the actual malfunction may
be different from that displayed on CONSULT.
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
Monitor Item [Unit]
Description
PUSH SW [On/Off]
Indicates condition of the push-button ignition switch.
Monitor Item [Unit]
Description
AIR PRESS FL [kPa, kg/cm
2
or Psi]
Indicates air pressure of front LH tire.
AIR PRESS FR [kPa, kg/cm
2
or Psi]
Indicates air pressure of front RH tire.
AIR PRESS RR [kPa, kg/cm
2
or Psi]
Indicates air pressure of rear RH tire.
AIR PRESS RL [kPa, kg/cm
2
or Psi]
Indicates air pressure of rear LH tire.
ID REGST FL1 [Done/Yet]
Indicates ID registration status of front LH transmitter.
ID REGST FR1 [Done/Yet]
Indicates ID registration status of front RH transmitter.
ID REGST RR1 [Done/Yet]
Indicates ID registration status of rear RH transmitter.
ID REGST RL1 [Done/Yet]
Indicates ID registration status of rear LH transmitter.
WARNING LAMP [Off/On]
Indicates condition of low tire pressure warning lamp in combination meter.
BUZZER [Off/On]
Indicates condition of buzzer in combination meter.
Test Item
Description
FLASHER
This test is able to check turn signal lamp operation [Off/LH/RH].
HORN
This test is able to check horn operation [On].
WARNING LAMP
This test is able to check tire pressure warning lamp operation [On/Off].
ID REGIST WARNING
This test is able to check ID regist warning chime operation [On/Off].
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст