Nissan Pathfinder. Manual — part 378
DLK-278
< REMOVAL AND INSTALLATION >
HOOD
3. Adjust the hood assembly so the clearance measurements are within specifications.
4. Tighten the hood hinge nuts and bolts to specified torque.
5. Tighten the hood lock assembly bolts to specified torque.
HOOD HINGE
HOOD HINGE : Removal and Installation
INFOID:0000000009175864
REMOVAL
1. Remove hood assembly. Refer to
DLK-275, "HOOD ASSEMBLY : Removal and Installation"
2. Remove front fender. Refer to
DLK-281, "FRONT FENDER : Removal and Installation"
3. Remove hood hinge bolts, and then remove hood hinge.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Before installing the hood hinge, apply anticorrosive agent onto the surface of the vehicle.
• After installation, perform hood assembly adjustment procedure. Refer to
RADIATOR CORE SUPPORT
DLK-279
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
RADIATOR CORE SUPPORT
Exploded View
INFOID:0000000009175865
Removal and Installation
INFOID:0000000009175866
CAUTION:
When removing radiator core support upper, be careful not to damage the painted surface.
REMOVAL
1. Remove front bumper fascia. Refer to
EXT-17, "Removal and Installation"
.
2. Release clips and then remove radiator upper seal.
3. Remove the battery. Refer to
PG-90, "Removal and Installation"
4. Disconnect harness connector from refrigerant pressure sensor.
5. Remove upper air intake.
6. Disconnect all harness clips from radiator core support assembly.
7. Remove hood lock assembly. Refer to
DLK-299, "HOOD LOCK RELEASE CABLE : Removal and Instal-
.
1.
Radiator support (LH)
2.
Radiator support (RH)
3.
Radiator core support assembly
A. Refer to installation for sequence order
ALKIA2870ZZ
DLK-280
< REMOVAL AND INSTALLATION >
RADIATOR CORE SUPPORT
8. Release clips of air guide seal and remove.
9. Remove radiator bolts. Refer to
CO-15, "Removal and Installation"
.
10. Remove bolts, and radiator core support assembly.
INSTALLATION
Installation is in the reverse order of removal.
• When installing the radiator core support, tighten the core support bolts in the sequence shown.
ALKIA2871ZZ
FRONT FENDER
DLK-281
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FRONT FENDER
Exploded View
INFOID:0000000009175867
FRONT FENDER
FRONT FENDER : Removal and Installation
INFOID:0000000009175868
CAUTION:
Use a shop cloths to protect the body from being damaged during removal and installation.
REMOVAL
1. Remove front fender protector. Refer to
EXT-28, "FENDER PROTECTOR : Removal and Installation"
2. Remove front combination lamp. Refer to
EXL-141, "Removal and Installation"
.
3. Remove front fender outside lower molding. Refer to
EXT-38, "Removal and Installation"
4. Remove front fender bolts and front fender.
CAUTION:
1.
Front fender
2.
Front fender upper seal
3.
Front fender hoodledge finisher
4.
Front fender bracket
5.
Front fender lower bracket
A.
Clip
B.
Bolt
AWKIA2622ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст