Nissan Pathfinder. Manual — part 41
ADP-156
< DTC/CIRCUIT DIAGNOSIS >
DOOR MIRROR MOTOR
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace automatic drive positioner control unit. Refer to
ADP-162, "Removal and Installation"
4.
CHECK DOOR MIRROR MOTOR
Check door mirror motor.
ADP-156, "Component Inspection"
.
Is the inspection result normal?
YES
>> Refer to
GI-49, "Intermittent Incident"
.
NO
>> Replace door mirror actuator. Refer to
MIR-20, "Removal and Installation"
.
Component Inspection
INFOID:0000000009176665
1.
CHECK DOOR MIRROR MOTOR-I
Check that door mirror motor does not trap foreign objects and does not have any damage.
.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Replace door mirror actuator. Refer to
MIR-20, "Removal and Installation"
.
2.
CHECK DOOR MIRROR MOTOR-II
1. Turn ignition switch OFF.
2. Disconnect door mirror.
3. Apply 12V to each power supply terminal of door mirror motor.
With around view monitor system
Without around view monitor system
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace door mirror actuator. Refer to
MIR-20, "Removal and Installation"
.
M33
10
Ground
UP
Battery voltage
Other than above
0
11
LEFT
Battery voltage
Other than above
0
22
DOWN / RIGHT
Battery voltage
Other than above
0
Door mirror connector
Terminal
Operational direction
(+)
(–)
D28 (LH)
D128 (RH)
10
11
RIGHT
11
10
LEFT
12
10
UP
10
12
DOWN
Door mirror connector
Terminal
Operational direction
(+)
(–)
D4 (LH)
D107 (RH)
10
9
RIGHT
9
10
LEFT
8
10
UP
10
8
DOWN
SEAT MEMORY INDICATOR
ADP-157
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
SEAT MEMORY INDICATOR
Description
INFOID:0000000009176666
• Memory switch is equipped on the seat memory switch installed to the driver side door trim. The operation
signal is input to the driver seat control unit when the memory switch is operated.
• The status of automatic drive positioner system can be checked according to the illuminating/flashing status.
Component Function Check
INFOID:0000000009176667
1.
CHECK FUNCTION
1. Select “MEMORY SW INDCTR” in “ACTIVE TEST” mode with CONSULT.
2. Check the memory indicator operation.
Is the operation of relevant parts normal?
YES
>> Inspection End.
NO
>> Perform diagnosis procedure. Refer to
ADP-157, "Diagnosis Procedure"
Diagnosis Procedure
INFOID:0000000009176668
Regarding Wiring Diagram information, refer to
ADP-55, "WITH AROUND VIEW MONITOR : Wiring Diagram"
ADP-40, "WITHOUT AROUND VIEW MONITOR : Wiring Diagram"
1.
CHECK SEAT MEMORY INDICATOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect driver seat control unit and seat memory switch.
3. Check continuity between driver seat control unit harness connector and seat memory switch harness
connector.
4. Check continuity between driver seat control unit harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace harness.
2.
CHECK MEMORY INDICATOR POWER SUPPLY
Check voltage between seat memory switch harness connector and ground.
Test item
Description
MEMORY SW INDCTR
OFF
Memory switch indicator
OFF
ON-1
Indicator 1: ON
ON-2
Indicator 2: ON
Driver seat control unit
Seat memory switch
Continuity
Connector
Terminal
Connector
Terminal
B209
10
D60
13
Yes
26
14
Driver seat control unit
Ground
Continuity
Connector
Terminal
B209
10
No
26
ADP-158
< DTC/CIRCUIT DIAGNOSIS >
SEAT MEMORY INDICATOR
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Check the following:
• 10A fuse no.1.
• Harness for open or short between memory indicator and fuse.
3.
CHECK MEMORY INDICATOR
ADP-158, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Replace seat memory switch. Refer to
ADP-163, "Removal and Installation"
.
4.
CHECK INTERMITTENT INCIDENT
GI-49, "Intermittent Incident"
Is the inspection result normal?
YES
>> Replace driver seat control unit. Refer to
ADP-161, "Removal and Installation"
NO
>> Repair or replace the malfunctioning part.
Component Inspection
INFOID:0000000009176669
1.
CHECK SEAT MEMORY INDICATOR
1. Disconnect seat memory switch.
2. Check continuity between seat memory switch terminals.
Is the inspection result normal?
YES
>> Inspection End.
NO
>> Replace seat memory switch. Refer to
ADP-163, "Removal and Installation"
.
(+)
(–)
Voltage (V)
(Approx.)
Seat memory switch
Connector
Terminals
D60
15
Ground
Battery voltage
Terminal
Continuity
Seat memory switch
(+)
(-)
15
13
Yes
14
ADP SYSTEM SYMPTOMS
ADP-159
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
SYMPTOM DIAGNOSIS
ADP SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000009176670
NOTE:
Always perform the “Basic Inspection” before performing diagnosis in the following table. Refer to
.
Symptom
Diagnosis procedure
Reference page
Manual functions (for specific part) do
not operate.
Sliding operation
Check sliding switch.
Reclining operation
Check reclining switch.
Lifting operation (front)
Check lifting switch (front).
Lifting operation (rear)
Check lifting switch (rear).
Tilt operation (if equipped) Check tilt switch.
Telescopic sensor (if
equipped)
Check telescopic switch.
Door mirror operation
1. Changeover switch.
2. Mirror switch
All parts of seat
Check power seat switch ground cir-
cuit.
Memory functions (for specific part) do
not operate.
Sliding operation
Check sliding sensor.
Reclining operation
Check reclining sensor.
Lifting operation (front)
Check lifting sensor (front).
Lifting operation (rear)
Check lifting sensor (rear).
Tilt operation (if equipped) Check tilt sensor.
Telescopic operation (if
equipped)
Check telescopic sensor.
Door mirror operation
Check door mirror sensor.
Driver side:
Passenger side:
Memory functions and manual functions
(for specific part) do not operate.
Sliding operation
Check sliding motor LH.
Reclining operation
Check reclining motor LH.
Lifting operation (front)
Check lifting motor LH (front).
Lifting operation (rear)
Check lifting motor LH (rear).
Tilt operation (if equipped) Check tilt motor.
Telescopic operation (if
equipped)
Check telescopic motor.
Door mirror operation
Check door mirror motor.
Entry/Exit assist function does not operate.
1. Check system setting.
2. Perform initialization.
3. Check front door switch (driver side).
Intelligent Key interlock function does not operate.
(Other automatic operations and Intelligent Key system are normal)
1. Check door lock function.
2. Perform memory storing.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст