Nissan Pathfinder. Manual — part 611
EXL-132
< SYMPTOM DIAGNOSIS >
BOTH SIDE HEADLAMPS DO NOT SWITCH TO HIGH BEAM
BOTH SIDE HEADLAMPS DO NOT SWITCH TO HIGH BEAM
Description
INFOID:0000000009175390
The headlamps (both sides) do not switch to high beam when the lighting switch is in the HI or PASS setting.
Diagnosis Procedure
INFOID:0000000009175391
1.
COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INSPECTION
Check the combination switch (lighting and turn signal switch). Refer to
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning part.
2.
CHECK HEADLAMP (HI) REQUEST SIGNAL INPUT
CONSULT DATA MONITOR
1. Select HL HI REQ of IPDM E/R DATA MONITOR item.
2. While operating the lighting switch, check the monitor status.
Is the inspection results normal?
YES
>> GO TO 3.
NO
>> Replace BCM. Refer to
BCS-80, "Removal and Installation"
3.
HEADLAMP (HI) CIRCUIT INSPECTION
Check the headlamp (HI) circuit. Refer to
EXL-108, "Diagnosis Procedure"
Is the inspection results normal?
YES
>> Replace IPDM E/R. Refer to
PCS-32, "Removal and Installation"
NO
>> Repair or replace the malfunctioning part.
Monitor item
Condition
Monitor status
HL HI REQ
Lighting switch position
HI or PASS
ON
Except for HI or PASS
OFF
BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON
EXL-133
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON
Description
INFOID:0000000009175392
The headlamps (both sides) do not turn ON in any lighting switch setting.
Diagnosis Procedure
INFOID:0000000009175393
1.
CHECK COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH)
Check the combination switch (lighting and turn signal switch). Refer to
Is the inspection results normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning part.
2.
CHECK HEADLAMP (LO) REQUEST SIGNAL INPUT
CONSULT DATA MONITOR
1. Select HL LO REQ of IPDM E/R DATA MONITOR item.
2. While operating the lighting switch, check the monitor status.
Is the inspection results normal?
YES
>> GO TO 3.
NO
>> Replace BCM. Refer to
BCS-80, "Removal and Installation"
3.
HEADLAMP (LO) CIRCUIT INSPECTION
Check the headlamp (LO) circuit. Refer to
EXL-110, "Diagnosis Procedure"
Is the inspection results normal?
YES
>> Replace IPDM E/R. Refer to
PCS-32, "Removal and Installation"
.
NO
>> Repair or replace the malfunctioning part.
Monitor item
Condition
Monitor status
HL LO REQ
Lighting switch position
Headlamp ON
OFF
OFF
EXL-134
< SYMPTOM DIAGNOSIS >
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMPS ARE NOT
TURNED ON
PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMPS ARE NOT
TURNED ON
Description
INFOID:0000000009175394
The parking, license plate, tail lamps and side marker lamps do not turn ON with the combination switch in any
setting.
Diagnosis Procedure
INFOID:0000000009175395
1.
COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INSPECTION
Check the combination switch (lighting and turn signal switch). Refer to
Is the inspection results normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning part.
2.
CHECK TAIL LAMP RELAY REQUEST SIGNAL INPUT
CONSULT DATA MONITOR
1. Select TAIL & CLR REQ of IPDM E/R DATA MONITOR item.
2. While operating the lighting switch, check the monitor status.
Is the inspection results normal?
YES
>> GO TO 3.
NO
>> Replace BCM. Refer to
BCS-80, "Removal and Installation"
3.
PARK LAMP CIRCUIT INSPECTION
Check the parking lamp circuit. Refer to
EXL-117, "Diagnosis Procedure"
Is the inspection results normal?
YES
>> Replace IPDM E/R. Refer to
PCS-32, "Removal and Installation"
NO
>> Repair or replace the malfunctioning part.
Monitor item
Condition
Monitor status
TAIL&CLR REQ
Lighting switch position
Parking lamp
ON
OFF
OFF
BOTH SIDE FRONT FOG LAMPS ARE NOT TURNED ON
EXL-135
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
BOTH SIDE FRONT FOG LAMPS ARE NOT TURNED ON
Description
INFOID:0000000009175396
The front fog lamps do not turn ON in any setting.
Diagnosis Procedure
INFOID:0000000009175397
1.
COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INSPECTION
Check the combination switch (lighting and turn signal switch). Refer to
Is the inspection results normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning part.
2.
CHECK FRONT FOG LAMP REQUEST SIGNAL INPUT
WITH CONSULT DATA MONITOR
1. Select FR FOG REQ of IPDM E/R DATA MONITOR item.
2. While operating the front fog lamp switch, check the monitor status.
Is the inspection results normal?
YES
>> GO TO 3.
NO
>> Replace BCM. Refer to
BCS-80, "Removal and Installation"
3.
FRONT FOG LAMP CIRCUIT INSPECTION
Check the front fog lamp circuit. Refer to
EXL-115, "Diagnosis Procedure"
.
Is the inspection results normal?
YES
>> Replace IPDM E/R. Refer to
PCS-32, "Removal and Installation"
.
NO
>> Repair or replace the malfunctioning part.
Monitor item
Condition
Monitor status
FR FOG REQ
Lighting switch position
Front fog lamp and Headlamp
ON
OFF
OFF
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст