Nissan Pathfinder. Manual — part 941
PWC-60
< SYMPTOM DIAGNOSIS >
[LH FRONT ONLY AUTO DOWN]
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
POWER WINDOW LOCK SWITCH DOES NOT FUNCTION
Diagnosis Procedure
INFOID:0000000009176166
1.
REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch. Refer to
PWC-62, "Removal and Installation"
>> Inspection End.
POWER WINDOW SWITCH DOES NOT ILLUMINATE
PWC-61
< SYMPTOM DIAGNOSIS >
[LH FRONT ONLY AUTO DOWN]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
POWER WINDOW SWITCH DOES NOT ILLUMINATE
DRIVER SIDE
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000009176167
1.
REPLACE POWER WINDOW MAIN SWITCH
Replace power window main switch.
PWC-62, "Removal and Installation"
.
>> Inspection End.
PASSENGER SIDE
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000009176168
1.
REPLACE POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH
Replace power window and door lock/unlock switch RH.
PWC-62, "Removal and Installation"
.
>> Inspection End.
REAR LH
REAR LH : Diagnosis Procedure
INFOID:0000000009176169
1.
REPLACE REAR POWER WINDOW SWITCH LH
Replace rear power window switch LH.
PWC-62, "Removal and Installation"
.
>> Inspection End.
REAR RH
REAR RH : Diagnosis Procedure
INFOID:0000000009176170
1.
REPLACE REAR POWER WINDOW SWITCH RH
Replace rear power window switch RH.
PWC-62, "Removal and Installation"
.
>> Inspection End.
PWC-62
< REMOVAL AND INSTALLATION >
[LH FRONT ONLY AUTO DOWN]
MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
REMOVAL AND INSTALLATION
MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
Removal and Installation
INFOID:0000000009176171
REMOVAL
1. Remove the main power window and door lock/unlock switch from the front door finisher using a suitable
tool.
2. Disconnect the harness connectors (A) from the main power
window and door lock/unlock switch (1) and harness connector
(B) from the mirror control switch (2).
3. Release the pawls, then separate the main power window and
door lock/unlock switch (1) from the switch finisher (2).
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
When the main power window and door lock/unlock switch is removed or replaced, it is necessary to perform
the initialization procedure. Refer to
ALKIA2855ZZ
ALKIA2856ZZ
POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH
PWC-63
< REMOVAL AND INSTALLATION >
[LH FRONT ONLY AUTO DOWN]
C
D
E
F
G
H
I
J
L
M
A
B
PWC
N
O
P
POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH
Removal and Installation
INFOID:0000000009176172
REMOVAL
1. Remove the power window and door lock/unlock switch (RH) from the front door finisher using a suitable
tool.
2. Disconnect the harness connector (A) from the power window
and door lock/unlock switch (RH) (1).
3. Release four pawls, then separate power window and door lock/
unlock switch (RH) (1) from switch finisher (2).
: Pawl
INSTALLATION
Installation is in the reverse order of removal.
ALKIA2857ZZ
ALKIA2858ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст