Almera Tino V10 (2003 year). Manual — part 56
YBT108
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
INSTRUMENT PANEL ASSEMBLY
Removal and Installation (Cont’d)
BT-25
YBT109
INSTRUMENT PANEL ASSEMBLY
Removal and Installation (Cont’d)
BT-26
Removal and Installation
NLBT0013
CAUTION:
I
Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.
1. Remove front and rear seats. Refer to “FRONT SEAT” and “REAR SEAT” for details, BT-45 and BT-48.
2. Remove front and rear seat belts. Refer to RS-5 and RS-7, “Front Seat Belt” and “Rear Seat Belt” for
details.
3. Remove carpet rear finish, front seat mounting cover and rear seat mounting cover. Refer to “LUGGAGE
ROOM TRIM” for details, BT-30.
4. Remove front and rear outer kicking plates.
5. Remove front and rear inner kicking plates.
6. Remove dash side finishers.
7. Remove front and rear body side welts.
8. Remove front pillar garnishes.
9. Remove center pillar lower garnishes.
10. Remove center pillar upper garnishes.
11. Remove front and rear room carpet.
12. Remove rear pillar garnish.
13. Remove rear parcel shelf side finish.
14. Remove luggage room carpet.
15. Remove luggage room rear plate.
16. Remove luggage room rear side plate.
17. Remove luggage room rear side lower finish.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
SIDE AND FLOOR TRIM
Removal and Installation
BT-27
NBT107
SIDE AND FLOOR TRIM
Removal and Installation (Cont’d)
BT-28
NBT108
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
SIDE AND FLOOR TRIM
Removal and Installation (Cont’d)
BT-29
Removal and Installation
NLBT0016
NBT181
LUGGAGE ROOM TRIM
Removal and Installation
BT-30
Removal and Installation
NLBT0014
Front door finisher
1. Open the window.
2. Remove inside handle escutcheon.
3. Remove screw securing pull handle.
4. Remove screw securing door finisher.
5. Remove clips securing front door finisher.
6. Lift out front door finisher.
7. Remove power window switch by pushing from backside, then disconnect the connectors.
Rear door finisher
8. Remove inside handle escutcheon.
9. Remove screw securing power window switch finisher, then disconnect the connector. (Power window
model)
10. Remove screw securing pull handle. (Manual window model)
11. Remove window regulator handle. (Manual window model)
12. Remove clips securing rear door finisher.
13. Lift out rear door finisher.
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
DOOR TRIM
Removal and Installation
BT-31
NBT173
DOOR TRIM
Removal and Installation (Cont’d)
BT-32
NBT174
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
DOOR TRIM
Removal and Installation (Cont’d)
BT-33
Removal and Installation
NLBT0015
1. Remove rear seat.
2. Remove shoulder anchor bolts. Refer to RS-5, “Front Seat Belt” for details.
3. Remove front pillar garnishes, center pillar upper garnishes, center pillar lower garnishes and rear pillar
garnishes. Refer to “SIDE AND FLOOR TRIM” for details, BT-27.
4. Push back the front seat back.
5. Remove sunroof switch, then disconnect connectors. (Model with sunroof)
6. Remove front personal light then disconnect connector (Model without sunroof)
7. Remove sunroof welt. (Model with sunroof)
8. Remove interior lamp assembly, then disconnect connectors.
9. Remove sun visors.
10. Remove assist grips.
11. Remove clips securing headliner, then remove headliner from vehicle through back door side.
NBT113
ROOF TRIM
Removal and Installation
BT-34
NBT114
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
ROOF TRIM
Removal and Installation (Cont’d)
BT-35
Removal and Installation
NLBT0035
1. Remove back door upper finisher.
2. Remove high-mounted stop lamp.
3. Remove back door side finisher.
4. Remove back door finisher.
NBT115
BACK DOOR TRIM
Removal and Installation
BT-36
Removal and Installation
NLBT0017
NBT175
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
EXTERIOR
Removal and Installation
BT-37
NBT176
EXTERIOR
Removal and Installation (Cont’d)
BT-38
NBT119
GI
MA
EM
LC
EC
FE
CL
MT
AT
AX
SU
BR
ST
RS
HA
SC
EL
IDX
EXTERIOR
Removal and Installation (Cont’d)
BT-39
NBT120
EXTERIOR
Removal and Installation (Cont’d)
BT-40
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст