Nissan X-Trail 32. Manual — part 1663
PCS-22
< ECU DIAGNOSIS INFORMATION >
[IPDM E/R]
IPDM E/R
ECU DIAGNOSIS INFORMATION
IPDM E/R
Reference Value
INFOID:0000000010741708
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor
Condition
Value/Status
REVERSE SIGNAL
Ignition switch ON
Selector lever in R position
CLOSE
Selector lever in any position other
than R
OPEN
IGN RELAY
Ignition switch OFF
OPEN
Ignition switch ON
CLOSE
PUSH SW
Release the push-button ignition switch
OPEN
Press the push-button ignition switch
CLOSE
NEUTRAL SW
Ignition switch ON
Selector lever in N position
CLOSE
Selector lever in any position other
than N
OPEN
INTERLOCK/PNP SW
Ignition switch ON
Selector lever in P or N position
CLOSE
Selector lever in any position other
than P or N
OPEN
OIL PRESSURE SW
Ignition switch OFF or engine running
OPEN
Ignition switch ON
CLOSE
LED H/L RH STATUS
Lighting switch OFF
CLOSE
Lighting switch 2ND or AUTO (light is illuminated)
OPEN
LED H/L LH STATUS
Lighting switch OFF
CLOSE
Lighting switch 2ND or AUTO (light is illuminated)
OPEN
HOOD SW
Close the hood
OPEN
Open the hood
CLOSE
COMPRESSOR
Engine running
A/C switch OFF
OFF
A/C switch ON
ON
H/L WASHER PUMP
Not operating
OFF
Headlamp washer operating
ON
HORN RELAY
Horn
Not operation
OFF
Other than above
ON
COOLING FAN
Cooling fan
Stop or High speed operation
OFF
Low speed operation
ON
FRONT WIPER HI/LO RE-
LAY
Ignition switch ON
Front wiper HI operated
ON
Other than above
OFF
FRONT WIPER RELAY
Ignition switch ON
Front wiper is operating
ON
Other than above
OFF
IGN RELAY OFF STATUS
Ignition switch OFF
ON
Ignition switch ON
OFF
IGN RELAY ON STATUS
Ignition switch ON
ON
Ignition switch OFF
OFF
PCS
IPDM E/R
PCS-23
< ECU DIAGNOSIS INFORMATION >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
STEERING LOCK PWR
SPLY
NOTE:
Only models with Intelligent
Key
Ignition switch OFF
ON
Ignition switch ON
OFF
HEIGHT SENSOR PWR
SPLY
Ignition switch ON
ON
Ignition switch OFF
OFF
COOLING FAN RELAY 1
Cooling fan
Low speed operation
ON
Stop or high speed operation
OFF
STARTER RELAY
Engine
Cranking
ON
Other than above
OFF
COMP ECV DUTY
Engine running
A/C switch OFF
0 %
A/C switch ON
0 – 100 %
COOLING FAN RELAY 2
Cooling fan
Stop or low speed operation
0 %
High speed operation
100 %
FR FOG LAMP LH
Lighting switch 1ST, 2ND or AUTO
(light is illuminated)
Front fog lamp switch OFF
0 %
Front fog lamp switch ON
80 – 100 %
FR FOG LAMP RH
Lighting switch 1ST, 2ND or AUTO
(light is illuminated)
Front fog lamp switch OFF
0 %
Front fog lamp switch ON
80 – 100 %
LEVELIZER OUTPUT
Lighting switch 2ND or AUTO (light
is illuminated)
Headlamp aiming: Unloaded vehi-
cle condition
70.0 %
Headlamp aiming: Low
Value decreases
from the unladen
status.
PARKING LAMP
Lighting switch OFF
0 %
Lighting switch 1ST, 2ND or AUTO (light is illuminated)
100 %
TAIL LAMP LH
Lighting switch OFF
0 %
Lighting switch 1ST, 2ND or AUTO (light is illuminated)
100 %
TAIL LAMP RH
Lighting switch OFF
0 %
Lighting switch 1ST, 2ND or AUTO (light is illuminated)
100 %
DAYTIME RUNNING LIGHT
LH
Engine running
Lighting switch 1ST
0 %
Lighting switch OFF
100 %
DAYTIME RUNNING LIGHT
RH
Engine running
Lighting switch 1ST
0 %
Lighting switch OFF
100 %
HEADLAMP (HI) LH
Lighting switch 2ND or AUTO (light
is illuminated)
Lighting switch HI or PASS
80 – 100 %
Lighting switch other than HI and
PASS
0 %
HEADLAMP (HI) RH
Lighting switch 2ND or AUTO (light
is illuminated)
Lighting switch HI or PASS
80 – 100 %
Lighting switch other than HI and
PASS
0 %
HEADLAMP (LO) LH
Lighting switch OFF
0 %
Lighting switch 2ND or AUTO (light is illuminated)
80 – 100 %
HEADLAMP (LO) RH
Lighting switch OFF
0 %
Lighting switch 2ND or AUTO (light is illuminated)
80 – 100 %
A/C RELAY STUCK
A/C relay
Normal
OK
On stuck
NG
Monitor
Condition
Value/Status
PCS-24
< ECU DIAGNOSIS INFORMATION >
[IPDM E/R]
IPDM E/R
A/C RELAY
Engine running
A/C switch OFF
OFF
A/C switch ON
(A/C compressor is operating)
ON
COMP ECV STATUS
Compressor
Normal
OK
Malfunction
NG
VEHICLE SECURITY HORN
NOTE:
This item is indicated, but not monitored.
OFF
BATTERY CURRENT SEN-
SOR
Battery current sensor
Normal
OK
Malfunction
NG
FRONT FOG LAMP
Lighting switch 1ST, 2ND or AUTO
(light is illuminated)
Front fog lamp switch OFF
OFF
Front fog lamp switch ON
ON
COMP ECV CURRENT
Compressor
Operating
0.00 A – 1.00 A
Other than above
0.00 A
BATTERY VOLTAGE
Ignition switch ON
11 V – 14 V
COOLING FAN DUTY
Engine running
0 – 100%
HOOD SW (CAN)
Open the hood
OPEN
Close the hood
CLOSE
CAN communication system malfunction
NG
FRONT WIPER
Ignition switch ON
Front wiper stop
STOP
Front wiper INT or LO operation
LOW
Front wiper other than INT or LO
operation
HIGH
IPDM E/R cannot detects front wip-
er status
NG
FR WIPER STOP POSITION
Ignition switch ON
Front wiper stop position
STOP P
Any position other than front wiper
stop position
ACTIVE P
HEADLAMP (HI)
Lighting switch 2ND or AUTO (light
is illuminated)
Lighting switch HI or PASS
ON
Other than above
OFF
HEADLAMP (LO)
Lighting switch OFF
OFF
Lighting switch 2ND or AUTO (light is illuminated)
ON
IGNITION RELAY STATUS
Ignition switch ON
ON
Ignition switch OFF
OFF
IGN RELAY MONITOR
Ignition switch ON
ON
Ignition switch OFF
OFF
IGNITION POWER SUPPLY
Ignition switch ON
ON
Ignition switch OFF
OFF
INTERLOCK/PNP SW (CAN)
Ignition switch ON
Selector lever in P or N position
ON
Other than above
OFF
NEUTRAL SWITCH (CAN)
Ignition switch ON
Selector lever in N position
ON
Other than above
OFF
CAN communication system malfunction
NG
PUSH-BUTTON IGN SW
(CAN)
NOTE:
Only models with Intelligent
Key
Release the push-button ignition switch
OFF
Press the push-button ignition switch
ON
Monitor
Condition
Value/Status
PCS
IPDM E/R
PCS-25
< ECU DIAGNOSIS INFORMATION >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
TAIL LAMP
Lighting switch OFF
OFF
Lighting switch 1ST, 2ND or AUTO (light is illuminated)
ON
REVERSE SIGNAL (CAN)
Ignition switch ON
Selector lever in R position
ON
Other than above
OFF
CAN communication system malfunction
NG
ST&ST CONT RELAY STA-
TUS
Start control relay and start motor relay are OFF
OFF
Start control relay is ON
OFF, ON
Engine cranking
ST R ON
STARTER MOTOR STATUS
Engine
Cranking
ON
Other than above
OFF
STARTER RELAY (CAN)
Engine
Cranking
HIGH
Other than above
LOW
CAN communication system malfunction
NG
IPDM NOT SLEEP
IPDM E/R
Operating
NO RDY
Other than above
READY
AFTER COOLING TIME
NOTE:
This item is indicated, but not monitored.
0min
AFTER COOLING SPEED
NOTE:
This item is indicated, but not monitored.
0 %
COOLING FAN TYPE
NOTE:
This item is indicated, but not monitored.
NISSAN
COMPRESSOR REQ1
Engine running
A/C switch OFF
OFF
A/C switch ON
ON
VHCL SECURITY HORN
REQ
NOTE:
This item is indicated, but not monitored.
OFF
DTRL REQ
Engine running
Lighting switch 1ST
OFF
Lighting switch OFF
ON
SLEEP/WAKE UP
NOTE:
This item is indicated, but not monitored.
WAKEUP
CLUTCH INTERLOCK SW
NOTE:
This item is indicated, but not monitored.
OFF
CRANKING ENABLE-TCM
Engine crank condition
Satisfied
OK
Other than above
NG
CRANKING ENABLE-ECM
Engine crank condition
Satisfied
OK
Other than above
NG
CAN DIAGNOSIS
Engine started
OK
Other than above
NG
FRONT FOG LAMP REQ
Lighting switch 1ST, 2ND or AUTO
(light is illuminated)
Front fog lamp switch OFF
OFF
Front fog lamp switch ON
ON
H/L WASHER REQ
Not operating
OFF
Headlamp washer operating
ON
PASSING REQ
NOTE:
This item is indicated, but not monitored.
OFF
HIGH BEAM REQ
Lighting switch 2ND or AUTO (light
is illuminated)
Lighting switch HI or PASS
ON
Lighting switch other than HI and
PASS
OFF
Monitor
Condition
Value/Status
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст