Nissan X-Trail 32. Manual — part 1632
PB-54
< BASIC INSPECTION >
REPLACEMENT OF REAR BRAKE PAD
Is malfunction detected?
YES
>> Check the DTC. Refer to
. GO TO 8.
NO
>> GO TO 8.
8.
CHECK DATA MONITOR
With CONSULT
Select “EHS/PKB”, “DATA MONITOR”, “BR FORCE EST (LH)” and “BR FORCE EST (RH)” according to this
order. Check that signals are within the specified value. Refer to
.
Is the check result normal?
YES
>> GO TO 9.
NO
>> GO TO 1.
9.
ERASE SELF-DIAGNOSIS MEMORY
With CONSULT
1.
Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait for 10 seconds or more after turning the ignition switch OFF or ON.
2.
Erase self-diagnosis results memory of “EHS/PKB”.
Is the memory erased?
YES
>> INSPECTION END
NO
>> Check the items indicated by the self-diagnosis.
ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION
PB-55
< BASIC INSPECTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION
Description
INFOID:0000000010722940
CAUTION:
When performing the following operations, always use CONSULT, for performing “INITIALIZATION
POSITION ADJUSTMENT”, “BRAKE OPERATION” and “BRAKE RELEASE” of “WORK SUPPORT”.
×
: Required
—: not required
*: M/T models
Work Procedure
INFOID:0000000010722941
CAUTION:
When performing the following operations, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Replacing electric parking brake control module
• Removing/installing rear brake pad (When pressing piston of rear brake caliper assembly)
• Replacing rear brake pad
• Replacing rear brake caliper assembly
1.
PERFORM INITIALIZATION POSITION ADJUSTMENT
With CONSULT
1.
Turn the ignition switch OFF to ON.
2.
Select “EHS/PKB”, “WORK SUPPORT”, and “INITIALIZATION POSITION ADJUSTMENT” according to
this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
3.
Touch “START”.
>> GO TO 2.
2.
PERFORM BRAKE OPERATION
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE OPERATION” according to this order.
CAUTION:
• Never operate the parking brake switch.
Procedure
• INITIALIZATION POSITION ADJUSTMENT
• BRAKE OPERATION
• BRAKE RELEASE
Removing/installing electric parking brake control module
—
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
—
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
×
Replacing rear brake pad
×
Removing/installing rear brake caliper assembly
—
Replacing rear brake caliper assembly
×
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
*
—
Replacing clutch stroke sensor
*
—
Removing/installing clutch pedal
*
—
Replacing clutch pedal
*
—
PB-56
< BASIC INSPECTION >
ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION
• Never depress the brake pedal.
2.
Touch “START”.
>> GO TO 3.
3.
PERFORM BRAKE RELEASE
With CONSULT
1.
Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE RELEASE” according to this order.
CAUTION:
• Never operate the parking brake switch.
• Never depress the brake pedal.
2.
Touch “START”.
>> GO TO 4.
4.
PERFORM THE SELF-DIAGNOSIS
With CONSULT
1.
Pull parking brake switch to activate electric parking brake.
2.
Push parking brake switch to release electric parking brake.
3.
Perform “EHS/PKB” self-diagnosis.
Is malfunction detected?
YES
>> Check the DTC. Refer to
. GO TO 5.
NO
>> GO TO 5.
5.
CHECK DATA MONITOR
With CONSULT
Select “EHS/PKB”, “DATA MONITOR”, “BR FORCE EST (LH)”, and “BR FORCE EST (RH)” according to this
order. Check that signals are within the specified value. Refer to
.
Is the check result normal?
YES
>> GO TO 6.
NO
>> GO TO 1.
6.
ERASE SELF-DIAGNOSIS MEMORY
With CONSULT
1.
Turn the ignition switch OFF to ON.
CAUTION:
Be sure to wait for 10 seconds or more after turning the ignition switch OFF or ON.
2.
Erase self-diagnosis results memory of “EHS/PKB”.
Is the memory erased?
YES
>> INSPECTION END
NO
>> Check the items indicated by the self-diagnosis.
CALIBRATION OF G SENSOR
PB-57
< BASIC INSPECTION >
C
D
E
G
H
I
J
K
L
M
A
B
PB
N
O
P
CALIBRATION OF G SENSOR
Description
INFOID:0000000010722942
CAUTION:
When performing the following operations, always use CONSULT, for performing “G SENSOR CALI-
BRATION” of “WORK SUPPORT”.
NOTE:
G sensor is integrated in electric parking control module.
×
: Required
—: not required
*: M/T models
Work Procedure
INFOID:0000000010722943
CAUTION:
When the following operations are performed, always use CONSULT. (It cannot be performed by any
means other than CONSULT.)
• Replacing electric parking brake control module (G sensor is integrated in electric parking brake
control module)
1.
CHECK THE VEHICLE STATUS
1.
Steer the steering wheel to the straight-ahead position.
2.
Stop the vehicle on level surface.
3.
Stop the engine.
4.
Turn the ignition switch OFF.
Is the vehicle stopped with steering wheel in the straight-ahead on level surface?
YES
>> GO TO 2.
NO
>> Steer the steering wheel to the straight-ahead position. Stop the vehicle on level surface.
2.
PERFORM G SENSOR CALIBRATION
CAUTION:
• Never allow passenger or load on the vehicle.
• Never apply vibration to the vehicle body when opening or closing door during calibration.
With CONSULT
1.
Turn the ignition switch ON.
CAUTION:
Never start the engine.
2.
Select “EHS/PKB”, “WORK SUPPORT”, and “G SENSOR CALIBRATION” according to this order.
3.
Touch “START”.
Procedure
G SENSOR CALIBRATION
Removing/installing electric parking brake control module
×
Replacing electric parking brake control module
×
Removing/installing rear brake pad (When not pressing piston of rear
brake caliper assembly)
—
Removing/installing rear brake pad (When pressing piston of rear brake
caliper assembly)
—
Replacing rear brake pad
—
Removing/installing rear brake caliper assembly
—
Replacing rear brake caliper assembly
—
Removing/installing parking brake switch
—
Replacing parking brake switch
—
Removing/installing clutch stroke sensor
*
—
Replacing clutch stroke sensor
*
—
Removing/installing clutch pedal
*
—
Replacing clutch pedal
*
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст