Nissan X-Trail 32. Manual — part 1973
SRC-60
< DTC/CIRCUIT DIAGNOSIS >
B00D2 FRONT PASSENGER AIR BAG ON INDICATOR
B00D2 FRONT PASSENGER AIR BAG ON INDICATOR
DTC Description
INFOID:0000000010842521
DTC DETECTION LOGIC
POSSIBLE CAUSE
[B00D2–04]
• Internal malfunction of front passenger air bag ON indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D2–11]
• Connection malfunction or short circuit to ground of harness and connector
• Internal malfunction of front passenger air bag ON indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D2–12]
• Connection malfunction or short circuit to power supply of harness and connector
• Internal malfunction of front passenger air bag ON indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D2–13]
• Connection malfunction or open circuit of harness and connector
• Internal malfunction of front passenger air bag ON indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D2–15]
• Connection malfunction or short circuit to power supply of harness and connector
• Connection malfunction or open circuit of harness and connector
• Internal malfunction of front passenger air bag ON indicator
• Internal malfunction of air bag diagnosis sensor unit
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAG RESULT
With CONSULT
1.
Turn ignition switch ON.
2.
Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.
Is malfunctioning part detected?
YES
>> Refer to
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
.
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010842522
WARNING:
DTC
CONSULT screen items
(Trouble diagnosis content)
DTC detecting condition
B00D2–04
PASS A/B ON INDCTR CIRC
[Restraint System Malfunction Indicator 1
(Subfault)]
Malfunction in front passenger air bag ON indicator circuit
B00D2–11
Front passenger air bag ON indicator circuit is shorted to ground
B00D2–12
Front passenger air bag ON indicator circuit is shorted to power supply
circuit
B00D2–13
Front passenger air bag ON indicator circuit is open
B00D2–15
Front passenger air bag ON indicator circuit is open or shorted to power
supply circuit
B00D2 FRONT PASSENGER AIR BAG ON INDICATOR
SRC-61
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait 3 minutes
or more. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
DIAGNOSTIC PROCEDURE
1.
CHECK HARNESS CONNECTOR
Check the harness connector for disconnection, looseness or damage.
Is the inspection result normal?
YES
>> GO TO 2.
NO–1 >> Damage: Replace malfunctioning harness and connector.
NO–2 >> Disconnection or looseness: Securely lock the connector.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace malfunctioning harness and connector.
3.
CHECK FRONT PASSENGER AIR BAG ON INDICATOR
1.
Replace indicator unit. Refer to
HAC-125, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 4.
NO
>> INSPECTION END
4.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
SR-38, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
SRC-62
< DTC/CIRCUIT DIAGNOSIS >
B00D5 FRONT PASSENGER AIR BAG OFF INDICATOR
B00D5 FRONT PASSENGER AIR BAG OFF INDICATOR
DTC Description
INFOID:0000000010842523
DTC DETECTION LOGIC
POSSIBLE CAUSE
[B00D5–04]
• Internal malfunction of front passenger air bag OFF indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D5–11]
• Connection malfunction or short circuit to ground of harness and connector
• Internal malfunction of front passenger air bag OFF indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D5–12]
• Connection malfunction or short circuit to power supply of harness and connector
• Internal malfunction of front passenger air bag OFF indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D5–13]
• Connection malfunction or open circuit of harness and connector
• Internal malfunction of front passenger air bag OFF indicator
• Internal malfunction of air bag diagnosis sensor unit
[B00D5–15]
• Connection malfunction or short circuit to power supply of harness and connector
• Connection malfunction or open circuit of harness and connector
• Internal malfunction of front passenger air bag OFF indicator
• Internal malfunction of air bag diagnosis sensor unit
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
1.
CHECK SELF-DIAG RESULT
With CONSULT
1.
Turn ignition switch ON.
2.
Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT.
Is malfunctioning part detected?
YES
>> Refer to
NO-1
>> To check malfunction symptom before repair: Refer to
GI-44, "Intermittent Incident"
.
NO-2
>> Confirmation after repair: INSPECTION END
Diagnosis Procedure
INFOID:0000000010842524
WARNING:
DTC
CONSULT screen items
(Trouble diagnosis content)
DTC detecting condition
B00D5–04
PASS A/B INDCTR CKT
[Restraint System Passenger Disable Indica-
tor (Subfault)]
Malfunction in front passenger air bag OFF indicator circuit
B00D5–11
Front passenger air bag OFF indicator circuit is shorted to ground
B00D5–12
Front passenger air bag OFF indicator circuit is shorted to power supply
circuit
B00D5–13
Front passenger air bag OFF indicator circuit is open
B00D5–15
Front passenger air bag OFF indicator circuit is open or shorted to pow-
er supply circuit
B00D5 FRONT PASSENGER AIR BAG OFF INDICATOR
SRC-63
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
• Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait 3 minutes
or more. (To discharge backup capacitor.)
• Never use unspecified tester or other measuring device.
DIAGNOSTIC PROCEDURE
1.
CHECK HARNESS CONNECTOR
Check the harness connector for disconnection, looseness or damage.
Is the inspection result normal?
YES
>> GO TO 2.
NO–1 >> Damage: Replace malfunctioning harness and connector.
NO–2 >> Disconnection or looseness: Securely lock the connector.
2.
CHECK WIRING HARNESS
Check the wiring harness externals.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Replace malfunctioning harness and connector.
3.
CHECK FRONT PASSENGER AIR BAG OFF INDICATOR
1.
Replace indicator unit. Refer to
HAC-125, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 4.
NO
>> INSPECTION END
4.
REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
1.
Replace air bag diagnosis sensor unit. Refer to
SR-38, "Removal and Installation"
2.
Perform DTC confirmation procedure. Refer to
.
Is DTC detected?
YES
>> GO TO 1.
NO
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст