Nissan X-Trail 32. Manual — part 1355
COOLER PIPE AND HOSE
HA-79
< REMOVAL AND INSTALLATION >
[MR20DD]
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
3.
Remove vacuum hose fixing clamp
, and then disconnect vac-
uum hose
from intake manifold
.
4.
Remove mounting bolt
, and then disconnect low-pressure
flexible hose
and high-pressure pipe
from expansion valve.
CAUTION:
Cap or wrap the joint of the A/C piping and expansion valve
with suitable material such as vinyl tape to avoid the entry
of air.
5.
Disconnect high-pressure pipe
from tube clip
.
6.
Remove mounting bolt
, and then remove low-pressure flexi-
ble hose
from compressor.
CAUTION:
Cap or wrap the joint of the A/C piping and compressor with
suitable material such as vinyl tape to avoid the entry of air.
7.
Remove mounting bolt
and nut
, and then remove low-pressure flexible hose from the vehicle.
JMIIA3401ZZ
JMIIA3323ZZ
: Vehicle front
JMIIA3346ZZ
JMIIA3324ZZ
JMIIA3347ZZ
HA-80
< REMOVAL AND INSTALLATION >
[MR20DD]
COOLER PIPE AND HOSE
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply compressor oil to them when installing.
• Check for leakages when recharging refrigerant. Refer to
HIGH-PRESSURE FLEXIBLE HOSE
HIGH-PRESSURE FLEXIBLE HOSE : Removal and Installation
INFOID:0000000011001066
CAUTION:
Perform lubricant return operation before each refrigeration system disassembly. However, if a large
amount of refrigerant or lubricant is detected, never perform lubricant return operation. Refer to
68, "Perform Lubricant Return Operation"
REMOVAL
1.
Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant. Refer to
2.
Remove front bumper fascia assembly. Refer to
EXT-15, "Removal and Installation"
3.
Remove mounting bolt
, and then disconnect high-pressure
flexible hose from condenser &liquid tank assembly.
CAUTION:
Cap or wrap the joint of the A/C piping and condenser & liq-
uid tank assembly with suitable material such as vinyl tape
to avoid the entry of air.
4.
Remove mounting bolt
, and then disconnect low-pressure
flexible hose
from compressor.
CAUTION:
Cap or wrap the joint of the A/C piping and compressor with
suitable material such as vinyl tape to avoid the entry of air.
5.
Remove mounting bolt
, and then disconnect high-pressure
flexible hose
from compressor.
CAUTION:
Cap or wrap the joint of the A/C piping and compressor with
suitable material such as vinyl tape to avoid the entry of air.
6.
Remove high-pressure flexible hose from the vehicle.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply compressor oil to them when installing.
JMIIA3326ZZ
: Vehicle front
JMIIA3324ZZ
: Vehicle front
JMIIA3325ZZ
COOLER PIPE AND HOSE
HA-81
< REMOVAL AND INSTALLATION >
[MR20DD]
C
D
E
F
G
H
J
K
L
M
A
B
HA
N
O
P
• Check for leakages when recharging refrigerant. Refer to
HIGH-PRESSURE PIPE
HIGH-PRESSURE PIPE : Removal and Installation
INFOID:0000000011001067
CAUTION:
Perform lubricant return operation before each refrigeration system disassembly. However, if a large
amount of refrigerant or lubricant is detected, never perform lubricant return operation. Refer to
68, "Perform Lubricant Return Operation"
REMOVAL
1.
Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant. Refer to
2.
Remove front bumper fascia assembly. Refer to
EXT-15, "Removal and Installation"
.
3.
Remove intake manifold. Refer to
EM-314, "Removal and Installation"
4.
Remove low-pressure flexible hose. Refer to
HA-78, "LOW-PRESSURE FLEXIBLE HOSE : Removal and
.
5.
Remove mounting bolt
, and then disconnect high-pressure
pipe from condenser & liquid tank assembly.
CAUTION:
Cap or wrap the joint of the A/C piping and condenser & liq-
uid tank assembly with suitable material such as vinyl tape
to avoid the entry of air.
6.
Remove high-pressure pipe.
INSTALLATION
Note the following items, then install in the reverse order of removal.
CAUTION:
• Replace O-rings with new ones. Then apply compressor oil to them when installing.
• Check for leakages when recharging refrigerant. Refer to
JMIIA3327ZZ
HA-82
< REMOVAL AND INSTALLATION >
[MR20DD]
CONDENSER
CONDENSER
Exploded View
INFOID:0000000011001068
CONDENSER
CONDENSER : Removal and Installation
INFOID:0000000011001069
CAUTION:
Perform lubricant return operation before each refrigeration system disassembly. However, if a large
amount of refrigerant or lubricant is detected, never perform lubricant return operation. Refer to
68, "Perform Lubricant Return Operation"
REMOVAL
1.
Use a refrigerant collecting equipment (for HFC-134a) to discharge the refrigerant. Refer to
2.
Removal apron bracket. Refer to
EXT-15, "Removal and Installation"
.
3.
Removal air guide. Refer to the following.
•
DLK-572, "MR20DD : Exploded View"
•
DLK-876, "MR20DD : Exploded View"
(WITHOUT INTELLIGENT KEY SYSTEM)
Condenser upper bracket RH
Refrigerant pressure sensor
O-ring
Condenser lower bracket RH
Condenser & liquid tank assembly
Condenser lower bracket LH
Condenser upper bracket LH
: Always replace after disassembly.
: N·m (kg-m, ft-lb)
JMIIA3360GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст