Nissan X-Trail 32. Manual — part 1247
ROOF SIDE MOLDING
EXT-47
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
3.
Remove back door hinge cover fixing clip
using a remover
tool (A).
4.
Disengage back door hinge cover fixing pawl, and then while
escape part
of back door hinge cover according to numerical
order 1
→
2 as shown in the figure, pull up back door hinge cover.
5.
Remove back door hinge cover as shown by the arrow in the fig-
ure.
6.
Apply protective tape (A) on the part to protect it from damage.
7.
Disengage roof side molding fixing clip using a remover tool (A),
and then remove roof side molding.
JMKIB2968ZZ
: Pawl
JMKIB2969ZZ
JMKIB2970ZZ
: Vehicle front
JMKIB2971ZZ
: Clip
JMKIB2972ZZ
EXT-48
< REMOVAL AND INSTALLATION >
ROOF SIDE MOLDING
8.
Remove front roof side bracket mounting bolts, and then remove front roof side bracket. (without roof rail)
9.
Remove rear roof side bracket mounting bolts, and then remove rear roof side bracket. (without roof rail)
10. Remove roof side molding clip.
NOTE:
Grind the head of rivet
with a drill (B) [bit of
φ
4.7
−
φ
4.9 mm
(
φ
0.185
−
φ
0.193 in)].
INSTALLATION
Note the following item, and then install in the reverse order of removal.
NOTE:
Securely crimp roof side molding extension with a hand riveter (A).
JMKIB1989ZZ
Roof side molding clip
Prepared hole diameter
φ
5.0
−
φ
5.4 mm
(
φ
0.197
−
φ
0.213 in)
Used rivet head diameter
φ
6.5 mm (
φ
0.256 in)
JMKIA3474ZZ
DOOR SASH MOLDING
EXT-49
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
DOOR SASH MOLDING
Exploded View
INFOID:0000000010787462
FRONT DOOR SASH MOLDING
FRONT DOOR SASH MOLDING : Removal and Installation
INFOID:0000000010787463
REMOVAL
1.
Remove front door outside molding. Refer to
EXT-55, "FRONT DOOR OUTSIDE MOLDING : Removal
Front door sash molding
Rear door sash molding
Front door panel
Rear door panel
: Vehicle front
: N·m (kg-m, in-lb)
JMKIB2999GB
EXT-50
< REMOVAL AND INSTALLATION >
DOOR SASH MOLDING
2.
Remove front door glass run upper side. Refer to
GW-45, "FRONT DOOR GLASS RUN : Removal and
.
3.
Remove front door weather-strip upper side. Refer to
DLK-279, "DOOR WEATHER-STRIP : Removal and
.
4.
Remove front door sash molding fixing screw
of front door
sash molding front side.
5.
Apply protective tapes (A) on body to protect the painted surface
from damage.
6.
Insert a remover tool (A) between front door panel and front door
sash molding, and then disengage front door sash molding as
shown by the arrows in the figure.
CAUTION:
Never use a material for remover tool which could damage
door panel.
7.
Remove front door sash molding.
INSTALLATION
Install in the reverse order of removal.
REAR DOOR SASH MOLDING
REAR DOOR SASH MOLDING : Removal and Installation
INFOID:0000000010787464
REMOVAL
1.
Fully open rear door glass.
2.
Remove rear door glass run upper side. Refer to
GW-55, "REAR DOOR GLASS RUN : Removal and
.
3.
Remove rear door weather-strip upper side. Refer to
DLK-287, "DOOR WEATHER-STRIP : Removal and
.
4.
Insert a remover tool to rear door sash molding center portion, and then disengage with rear door panel
and slide the rear and front of the vehicle, and then remove rear door sash molding.
INSTALLATION
Install in the reverse order of removal.
JMKIB3031ZZ
JMKIB1522ZZ
JMKIB1523ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст