Nissan X-Trail 32. Manual — part 2196
WCS
SYSTEM
WCS-15
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SOUND SPECIFICATION
WARNING CHIME : P Position Warning (Buzzer)
INFOID:0000000010713026
PURPOSE
P position warning warns the driver of egression from the vehicle while shift is other than P position.
SYNCRONIZATION WITH WARNING/INDICATOR (INFORMATION DISPLAY)
Synchronization is applied.
Refer to
DLK-57, "INFORMATION DISPLAY (COMBINATION METER) : P Position Warning (Information Dis-
SYSTEM DIAGRAM
SIGNAL PATH
For internal
• BCM judges whether or not warning the driver is required, according to push switch signal from push-button
ignition switch, inside key antenna signal from each inside key antenna, and shift position signal from TCM
via CAN communication.
• When BCM judges that warning the driver is required, BCM transmits buzzer output signal and meter display
signal to combination meter via CAN communication.
• When combination meter receives buzzer output signal and meter display signal, buzzer and information
display operate.
For external
• BCM judges whether or not warning the driver is required, according to door switch signal from each door
switch and inside key antenna signal from each inside key antenna while P position warning (for internal) is
operated.
• When BCM judges that warning the driver is required, Intelligent Key buzzer operates.
WARNING OPERATING CONDITION
For internal
When all of the following conditions are satisfied.
JMKIB0187GB
JMKIB3612GB
WCS-16
< SYSTEM DESCRIPTION >
SYSTEM
• Shift position is other than P
• Ignition switch is turned from ON to OFF
For external
When all of the following conditions are satisfied.
• P position warning (for internal) is in operation
• A registered Intelligent Key is not detected in passenger room
• Door switch is switched from ON to OFF (Open door is closed)
WARNING CANCEL CONDITION
For internal
• When any of the following conditions are satisfied.
- Shift position is P
- Ignition switch is ON
For external
• When any of the following conditions are satisfied.
- Ignition switch is ON
- Shift position is P
- A registered Intelligent Key is detected in passenger room
- When ignition switch is in LOCK or OFF position, Intelligent Key backside is contacted to engine switch while
brake pedal is depressed (when Intelligent Key battery is discharged)
TIMING CHART
For internal
For external
JMKIB1896GB
JMKIB0191GB
WCS
SYSTEM
WCS-17
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SOUND SPECIFICATION
For internal
For external
WARNING CHIME : Seat Belt Warning
INFOID:0000000010743090
DESCRIPTION
Seat belt warning lamp warns the driver that driver seat belt is not fastened.
SYNCRONIZATION WITH WARNING LAMP/INDICATOR LAMP
For warning lamp, refer to
SYSTEM DIAGRAM
SIGNAL PATH
BCM judges seat belt reminder warning and transmits buzzer output signal to combination meter via CAN
communication. Combination meter sounds buzzer when buzzer output signal is received.
WARNING OPERATION CONDITIONS
Combination meter operates seat belt reminder warning buzzer when all of the following conditions are satis-
fied.
• Ignition switch is ON.
• Driver seat belt is not fastened. (Driver seat belt buckle switch is ON.)
• Passenger seat belt is not fastened. (Passenger seat belt buckle switch is ON.)
• Vehicle speed is approximately 15 km/h or more.
JMKIB1897GB
JMKIB0192GB
JMNIA0426GB
WCS-18
< SYSTEM DESCRIPTION >
SYSTEM
WARNING CANCEL CONDITIONS
Combination meter cancels seat belt reminder warning buzzer when all of the following conditions are satis-
fied.
• Ignition switch is other than ON.
• Driver seat belt is fastened. (Driver seat belt buckle switch is OFF.)
• Passenger seat belt is fastened. (Passenger seat belt buckle switch is OFF.)
• Approximately 90 seconds are passed since warning start.
TIMING CHART
SOUND SPECIFICATION
WARNING CHIME : Stop/Start warning
INFOID:0000000011010024
PURPOSE
The combination meter alerts the driver by sounding the integrated buzzer and blinking the indicator lamp at
high speed when the driver
′
s operation is judged as improper operation while the stop/start system is operat-
ing.
SYNCHRONIZATION WITH WARNING/INDICATOR (INFORMATION DISPLAY)
Applicable
For warning/indicator (information display), refer to
EC-864, "INFORMATION DISPLAY (COMBINATION
METER) : Indicator/Information"
.
JSNIA2427GB
JSNIA2594GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст