Nissan X-Trail 32. Manual — part 2197
WCS
SYSTEM
WCS-19
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYSTEM DIAGRAM
SIGNAL PATH
• IPDM E/R transmits a hood switch signal to ECM via CAN communication.
• BCM transmits a door switch signal to ECM via CAN communication.
• The combination meter transmits a seat belt buckle switch signal to ECM via CAN communication.
• ECM judges a stop/start system warning according to a received signal and transmits a stop/start indicator
lamp request signal to the combination meter via CAN communication.
• The combination meter sounds the warning buzzer and blinks the indicator lamp when receiving a stop/start
indicator lamp request signal.
WARNING OPERATING CONDITION
When the following conditions are satisfied during stop/start system operation:
• Hood is opened.
• Driver
′
s door is opened and driver
′
s seat belt is unbuckled. (M/T models)
NOTE:
The stop/start system is cancelled and the engine stops when the hood is opened or driver
′
s door is opened*
1
and driver
′
s seat belt is unbuckled*
1
. To restart the engine, use the key switch.
*
1
: M/T models
WARNING CANCEL CONDITION
• Stop/start system is cancelled after the hood is opened.
• Driver
′
s door is closed.
• Driver
′
s seat belt is buckled.
TIMING CHART
JSBIA4080GB
JSBIA4082GB
WCS-20
< SYSTEM DESCRIPTION >
SYSTEM
SOUND SPECIFICATION
WARNING CHIME : Take Away Warning (Buzzer)
INFOID:0000000010713028
PURPOSE
Take away warning warns the driver that Intelligent Key is removed from passenger room, according to the
vehicle status.
SYNCHROIZATION WITH WARNING/INDICATOR (INFORMATION DISPLAY)
Synchronization is applied.
Refer to
DLK-60, "INFORMATION DISPLAY (COMBINATION METER) : Take Away Warning (Information Dis-
SYSTEM DIAGRAM
SIGNAL PATH
Door status changes from open to close
• BCM judges whether or not warning the driver is required, according to push switch signal from push-button
ignition switch, door switch signal from each door switch, and inside key antenna signal from each inside key
antenna.
• When BCM judges that warning the driver is required, buzzer output signal and meter display signal are
transmitted by BCM to combination meter via CAN communication.
• Combination meter, when it receives buzzer output signal and meter display signal, operates buzzer and
information display. BCM simultaneously operates Intelligent Key warning buzzer.
Door status is open
• BCM judges whether or not warning the driver is required, according to push switch signal from push-button
ignition switch, door switch signal from each door switch, and inside key antenna signal from each inside key
antenna.
• BCM, when it judges that warning to the driver is required, transmits meter display signal to combination
meter via CAN communication.
• When combination meter receives meter display signal, information display operates.
Push-button ignition switch is pressed
JSBIA3035GB
JMKIB3613GB
WCS
SYSTEM
WCS-21
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
• BCM judges whether or not warning the driver is required, according to push switch signal from push-button
ignition switch, door switch signal from each door switch, steering lock unit status signal from steering lock
unit, and inside key antenna signal from inside key antenna.
• When BCM judges that warning the driver is required, buzzer output signal and meter display signal are
transmitted by BCM to combination meter via CAN communication.
• Combination meter, when it receives buzzer output signal and meter display signal, operates buzzer and
information display.
WARNING OPRATING CONDITION
Door status changes from open to close
When all of the following conditions are satisfied
• Ignition switch is other than LOCK and OFF
• Door switch is switched from ON to OFF (Open door is closed)
• A registered Intelligent Key is not detected in passenger room
Door status is open
When all of the following conditions are satisfied
• Ignition switch is other than LOCK and OFF
• Door switch is ON (Door is open)
• A registered Intelligent Key is not detected in passenger room
Push-button ignition switch is pressed
When all of the following conditions are satisfied
• Steering lock is UNLOCK
• Ignition switch: OFF
• A registered Intelligent Key is not detected in passenger room
• Push-button ignition switch operation is performed
WARNING CANCEL CONDITION
Door status changes from open to close
• When any of the following conditions are satisfied
- Ignition switch is in LOCK position
- A registered Intelligent Key is detected in passenger room
- Since warning start, 15 seconds are passed while battery saver system is in operation
Door status is open
A registered Intelligent Key is detected in passenger room
Push-button ignition switch is pressed
• When any of the following conditions are satisfied
- Ignition switch is in LOCK position
- A registered Intelligent Key is detected in passenger room
NOTE:
For battery saver system, refer to
PCS-67, "POWER DISTRIBUTION SYSTEM : System Description"
.
TIMING CHART
WCS-22
< SYSTEM DESCRIPTION >
SYSTEM
Door status changes from open to close
Door status is open
JMKIB1439GB
JMKIB1652GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст