Nissan X-Trail 32. Manual — part 2249
WASHER NOZZLE AND TUBE
WW-103
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
7.
Remove rear washer tube A
from fixing clips.
8.
Remove rear washer tube A from harness protector.
9.
Remove rear washer tube A
from fixing clips
.
10. Remove rear end of headlining to make work space. Refer to
INT-37, "Removal and Installation"
11. Remove rear washer tube A
from fixing clips
.
12. Disconnect rear washer tube A from joint
, and then remove
rear washer tube A.
13. Remove rear washer tube C. Refer to
WW-99, "REAR WASHER NOZZLE : Removal and Installation"
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
Align washer tube marking to the vehicle installation position.
REAR CAMERA WASHER TUBE
REAR CAMERA WASHER TUBE : Removal and Installation
INFOID:0000000010785470
REMOVAL
Remove rear camera washer tube. Refer to
DAS-156, "Removal and Installation"
INSTALLATION
Install in the reverse order of removal.
: Clip
JMLIA5021ZZ
JMLIA5022ZZ
JMLIA5024ZZ
WW-104
< REMOVAL AND INSTALLATION >
HEADLAMP WASHER
HEADLAMP WASHER
Exploded View
INFOID:0000000010786689
Washer tank
Headlamp washer nozzle RH
Packing
Headlamp washer pump
Tube clip
Headlamp washer cover RH
Front bumper fascia
Headlamp washer cover LH
Headlamp washer nozzle LH
Headlamp washer tube
: Pawl
JMLIA5411ZZ
HEADLAMP WASHER
WW-105
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Hydraulic Layout
INFOID:0000000010786690
WASHER NOZZLE
WASHER NOZZLE : Removal and Installation
INFOID:0000000010786691
REMOVAL
1.
Remove front bumper fascia. Refer to
EXT-15, "Removal and Installation"
.
2.
Disengage headlamp washer cover fixing pawls
while pull out
headlamp washer nozzle from front bumper fascia, and then
remove headlamp washer cover.
Headlamp washer nozzle
Washer tank
Tube clip
Headlamp washer tube
JMLIA5412ZZ
JMLIA5413ZZ
WW-106
< REMOVAL AND INSTALLATION >
HEADLAMP WASHER
3.
Disconnect headlamp washer tube connector
, and then remove headlamp washer tube from headlamp
washer nozzle.
NOTE:
• Move headlamp washer tube connector
toward the direction of arrow (1) to unlock.
• Move headlamp washer tube connector
toward the direction of arrow (2) to lock.
4.
Disengage headlamp washer nozzle from front bumper fascia
according to numerical order 1
→
2 indicated by arrows as shown
in the figure.
5.
Disengage headlamp washer nozzle fixing pawl, and then
remove headlamp washer nozzle.
INSTALLATION
Note the following items, and install in the reverse order of removal.
CAUTION:
• Add washer liquid up to the top of the washer tank inlet after installing. Check that there is no leak-
age.
• After installation, check spray position. Refer to
WW-106, "WASHER NOZZLE : Inspection"
.
WASHER NOZZLE : Inspection
INFOID:0000000010786692
HEADLAMP WASHER NOZZLE SPRAY POSITION INSPECTION
CAUTION:
Replace headlamp washer nozzle assembly with a new part if headlamp washer jet position is outside
the headlamp illumination area shown in the figure.
JMLIA5414ZZ
JMLIA5415ZZ
Pawl
JMLIA5416ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст