Nissan X-Trail 32. Manual — part 1232
SIDE TURN SIGNAL LAMP
EXL-385
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
SIDE TURN SIGNAL LAMP
Exploded View
INFOID:0000000010789909
.
Removal and Installation
INFOID:0000000010789910
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-214, "Precautions for Removing Battery Terminal"
REMOVAL
1.
Remove door mirror cover. Refer to
MIR-30, "DOOR MIRROR COVER : Removal and Installation"
2.
Remove side turn signal lamp fixing screws.
3.
Remove seal packing
and disconnect side turn signal lamp
harness connector
, and then remove side turn signal lamp
from door mirror housing.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010789911
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-214, "Precautions for Removing Battery Terminal"
SIDE TURN SIGNAL LAMP BULB
CAUTION:
Replacement of a single part is not possible due to the adoption of LED bulb. For replacement, replace
side turn signal lamp as a set. Refer to
EXL-385, "Removal and Installation"
JMLIA4978ZZ
EXL-386
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
REAR COMBINATION LAMP
REAR COMBINATION LAMP
Exploded View
INFOID:0000000010789912
REMOVAL
Body Side
Back Door Side
Clip
Grommet
Rear combination lamp
(body side)
: Clip
: N·m (kg-m, in-lb)
JMLIA4960GB
REAR COMBINATION LAMP
EXL-387
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
DISASSEMBLY
Rear combination lamp
(back door side)
: Clip
: N·m (kg-m, in-lb)
JMLIA4961GB
EXL-388
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
REAR COMBINATION LAMP
REAR COMBINATION LAMP (BODY SIDE)
REAR COMBINATION LAMP (BODY SIDE) : Removal and Installation
INFOID:0000000010789913
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
EXL-214, "Precautions for Removing Battery Terminal"
REMOVAL
1.
Fully open back door.
2.
Remove rear spoiler. Refer to
EXT-64, "Removal and Installation"
.
3.
Remove rear combination lamp (body side) mounting bolts.
4.
Apply protective tapes (A) on the part to protect it from damage.
5.
Remove luggage side lower finisher. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER : Removal
Rear combination lamp
(body side)
Rear combination lamp
(back door side)
Tail lamp bulb
Back-up lamp bulb
Back-up lamp bulb socket
Tail lamp bulb socket
Rear turn signal lamp bulb
Rear turn signal lamp bulb socket
Stop lamp bulb socket
Stop lamp bulb
JMLIA4962ZZ
JMLIA4967ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст