Nissan X-Trail 32. Manual — part 1461
VANITY MIRROR LAMP
INL-81
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
2.
Disengage lens fixing pawls using a remover tool (A) according
to numerical order 1
→
4 indicated by arrows as shown in the fig-
ure, and then remove lens.
CAUTION:
Use a remover tool wrapped in tape.
3.
Remove bulb.
: Pawl
JMLIA4269ZZ
INL-82
< REMOVAL AND INSTALLATION >
GLOVE BOX LAMP
GLOVE BOX LAMP
Exploded View
INFOID:0000000010755167
Replacement
INFOID:0000000010755168
GLOVE BOX LAMP BULB
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
INL-4, "Precautions for Removing Battery Terminal"
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it for pre-
venting damage to the bulb.
• The surface of the bulb is very hot just after the lamp is turned OFF. Never touch the glass surface of
the bulb with bare hands for preventing burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (due to dirt or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
1.
Remove glove box cover. Refer to the following.
• LHD models: Refer to
IP-14, "Removal and Installation"
.
• RHD models: Refer to
IP-41, "Removal and Installation"
Lamp housing
Bulb & socket assembly
Glove box cover
: Pawl
: Vehicle front
JMLIA4880ZZ
GLOVE BOX LAMP
INL-83
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
2.
Remove bulb & socket assembly according to numerical order
1
→
2 indicated by arrows as shown in the figure.
JMLIA3624ZZ
INL-84
< REMOVAL AND INSTALLATION >
ROOM LAMP
ROOM LAMP
Exploded View
INFOID:0000000010755169
Removal and Installation
INFOID:0000000010755170
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
INL-4, "Precautions for Removing Battery Terminal"
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it for pre-
venting damage to the bulb.
• The surface of the bulb is very hot just after the lamp is turned OFF. Never touch the glass surface of
the bulb with bare hands for preventing burns.
Headlining
Room lamp housing
Bulb
Lens
: Pawl
: Metal clip
: Vehicle front
JMLIA3194ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст