Nissan X-Trail 32. Manual — part 1580
MWI-2
WARNING LAMPS/INDICATOR LAMPS : Rear
Fog Lamp Indicator Lamp . . . . . . . . . ...
WARNING LAMPS/INDICATOR LAMPS : Seat
Belt Warning Lamp . . . . . . . . . . . . .
WARNING LAMPS/INDICATOR LAMPS : Securi-
ty Indicator Lamp (Turn ON) . . . . . . . . ...
WARNING LAMPS/INDICATOR LAMPS : Securi-
ty Indicator Lamp (Blinks) . . . . . . . . . ...
WARNING LAMPS/INDICATOR LAMPS : SRS
Air Bag Warning Lamp . . . . . . . . . . ...
WARNING LAMPS/INDICATOR LAMPS : Turn
Signal Indicator Lamp . . . . . . . . . . . .
WARNING LAMPS/INDICATOR LAMPS : VDC
(ESP) OFF Indicator Lamp . . . . . . . . . .
WARNING LAMPS/INDICATOR LAMPS : VDC
(ESP) Warning Lamp . . . . . . . . . . . ..
WARNING LAMPS/INDICATOR LAMPS : Water-
in-fuel-filter warning lamp . . . . . . . . . ...
WARNING/INDICATOR (ON INFORMATION DIS-
PLAY) . . . . . . . . . . . . . . . . . ....
WARNING/INDICATOR (ON INFORMATION
DISPLAY) : Alert . . . . . . . . . . . . . .
WARNING/INDICATOR (ON INFORMATION
DISPLAY) : Maintenance . . . . . . . . . ....
WARNING/INDICATOR (ON INFORMATION
DISPLAY) : Oil Level Warning . . . . . . . ....
METER ILLUMINATION CONTROL . . . . . . .
METER ILLUMINATION CONTROL : System De-
scription . . . . . . . . . . . . . . . . ..
METER EFFECT FUNCTION . . . . . . . . ....
METER EFFECT FUNCTION : System Descrip-
tion . . . . . . . . . . . . . . . . . . ..
INFORMATION DISPLAY . . . . . . . . . . .
INFORMATION DISPLAY : System Description ....
OPERATION . . . . . . . . . . . . . ..
Switch Name and Function . . . . . . . . . .
DIAGNOSIS SYSTEM (COMBINATION
METER) . . . . . . . . . . . . . . . ..
On Board Diagnosis Function . . . . . . . . .
CONSULT Function . . . . . . . . . . . ....
ECU DIAGNOSIS INFORMATION . . . ..
COMBINATION METER . . . . . . . . .
Reference Value . . . . . . . . . . . . . .
Fail-Safe . . . . . . . . . . . . . . . .
DTC Inspection Priority Chart . . . . . . . .
DTC Index . . . . . . . . . . . . . . . .
WIRING DIAGRAM . . . . . . . . .
METER SYSTEM . . . . . . . . . . . .
Wiring Diagram . . . . . . . . . . . . . ..
BASIC INSPECTION . . . . . . . . ..
DIAGNOSIS AND REPAIR WORKFLOW . .
Work flow . . . . . . . . . . . . . . . ..
DTC/CIRCUIT DIAGNOSIS . . . . . ...
U1000 CAN COMM CIRCUIT . . . . . . ...
DTC Description . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
U1010 CONTROL UNIT (CAN) . . . . . .
DTC Description . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B2205 VEHICLE SPEED . . . . . . . . ..
DTC Description . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B2267 ENGINE SPEED . . . . . . . . .
DTC Description . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B2268 WATER TEMP . . . . . . . . . ..
DTC Description . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
B2321, B2322 OIL LEVEL SENSOR . . . ...
DTC Description . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
Component Inspection . . . . . . . . . . ..
B2323 ILLUMINATION CONTROL SIGNAL ...
DTC Description . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
POWER SUPPLY AND GROUND CIRCUIT .
COMBINATION METER . . . . . . . . . . ..
COMBINATION METER : Diagnosis Procedure ...
STEERING SWITCH SIGNAL A CIRCUIT . ...
Component Function Check . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
Component Inspection . . . . . . . . . . ..
STEERING SWITCH SIGNAL B CIRCUIT . ...
Component Function Check . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
Component Inspection . . . . . . . . . . ..
METER CONTROL SWITCH SIGNAL CIR-
CUIT . . . . . . . . . . . . . . . . ..
Component Function Check . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
Component Inspection . . . . . . . . . . ..
FUEL LEVEL SENSOR SIGNAL CIRCUIT . ..
EXCEPT FOR R9M . . . . . . . . . . . . .
EXCEPT FOR R9M : Component Function Check .
EXCEPT FOR R9M : Diagnosis Procedure . . .
EXCEPT FOR R9M : Component Inspection . ...
MWI
MWI-3
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
R9M : Component Function Check . . . . . ...
R9M : Diagnosis Procedure . . . . . . . . .
R9M : Component Inspection [Fuel Level Sensor
Unit (Main and Sub)] . . . . . . . . . . . .
R9M : Component Inspection (Fuel Pump Control
Module) . . . . . . . . . . . . . . . . .
AMBIENT SENSOR SIGNAL CIRCUIT . . ...
Diagnosis Procedure . . . . . . . . . . . .
Component Inspection . . . . . . . . . . ..
SYMPTOM DIAGNOSIS . . . . . . .
WARNING/INDICATOR LAMP REMAINS ON
Work Flow . . . . . . . . . . . . . . . .
THE FUEL GAUGE INDICATOR DOES NOT
OPERATE . . . . . . . . . . . . . . .
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE STEERING SWITCHES ARE INOPERA-
TIVE . . . . . . . . . . . . . . . . ..
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE METER CONTROL SWITCH IS INOPER-
ATIVE . . . . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE DOOR OPEN WARNING CONTINUES
DISPLAYING, OR DOES NOT DISPLAY . ...
Description . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
THE AMBIENT TEMPERATURE DISPLAY IS
INCORRECT . . . . . . . . . . . . ...
Description . . . . . . . . . . . . . . . .
Diagnosis Procedure . . . . . . . . . . . .
NORMAL OPERATING CONDITION . . . .
INFORMATION DISPLAY . . . . . . . . . .
INFORMATION DISPLAY : Description . . . .
REMOVAL AND INSTALLATION . . . .
COMBINATION METER . . . . . . . . .
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
Disassembly and Assembly . . . . . . . . ...
STEERING SWITCH . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
METER CONTROL SWITCH . . . . . . ..
Exploded View . . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . ...
AMBIENT SENSOR . . . . . . . . . .
MWI-4
< HOW TO USE THIS MANUAL >
HOW TO USE THIS SECTION
HOW TO USE THIS MANUAL
HOW TO USE THIS SECTION
Information
INFOID:0000000010821087
• In this manual, “Idling Stop System” is referred to as “Stop / Start System”.
• Both “VDC” and “ESP” are used in this manual. These indicate the same system.
• Both “hill start assist” and “Uphill start support” are used in this manual. These indicate the same system.
• Both “advanced hill decent control” and “downhill drive support” are used in this manual. These indicate the
same system.
• Both “active trace control” and “dynamic cornering enhancement” are used in this manual. These indicate
the same system.
MWI
PRECAUTIONS
MWI-5
< PRECAUTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000010726630
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the “SRS AIR BAG” and
“SEAT BELT” of this Service Manual.
WARNING:
Always observe the following items for preventing accidental activation.
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see “SRS AIR BAG”.
• Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Ser-
vice Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preventing accidental activation.
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with
a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precautions for Removing Battery Terminal
INFOID:0000000010726633
• With the adoption of Auto ACC function, ACC power is automatically supplied by operating the intelligent key
or remote keyless entry or by opening/closing the driver side door. In addition, ACC power is supplied even
after the ignition switch is turned to the OFF position, i.e. ACC power is supplied for a certain fixed time.
• When disconnecting the 12V battery terminal, turn off the ACC
power before disconnecting the 12V battery terminal, observing
“How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time even after ignition
switch is turned OFF and ignition power supply is stopped. If the
battery terminal is disconnected before ECU stops, accidental DTC
detection or ECU data damage may occur.
• For vehicles with the 2-batteries, be sure to connect the main bat-
tery and the sub battery before turning ON the ignition switch.
NOTE:
If the ignition switch is turned ON with any one of the terminals of
main battery and sub battery disconnected, then DTC may be detected.
• After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to Instruction 1 or Instruction 2 described below.
For vehicles parked by ignition switch OFF, refer to Instruction 2.
INSTRUCTION 1
1.
Open the hood.
SEF289H
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст