Nissan X-Trail 32. Manual — part 1581
MWI-6
< PRECAUTION >
PRECAUTIONS
2.
Turn key switch to the OFF position with the driver side door opened.
3.
Get out of the vehicle and close the driver side door.
4.
Wait at least 3 minutes. For vehicle with the engine listed below, remove the battery terminal after a lapse
of the specified time.
CAUTION:
While waiting, never operate the vehicle such as locking, opening, and closing doors. Violation of
this caution results in the activation of ACC power supply according to the Auto ACC function.
5.
Remove 12V battery terminal.
CAUTION:
After installing 12V battery, always check self-diagnosis results of all ECUs and erase DTC.
INSTRUCTION 2 (FOR VEHICLES PARKED BY IGNITION SWITCH OFF)
1.
Unlock the door with intelligent key or remote keyless entry.
NOTE:
At this moment, ACC power is supplied.
2.
Open the driver side door.
3.
Open the hood.
4.
Close the driver side door.
5.
Wait at least 3 minutes.
CAUTION:
While waiting, never operate the vehicle such as locking, opening, and closing doors. Violation of
this caution results in the activation of ACC power supply according to the Auto ACC function.
6.
Remove 12V battery terminal.
CAUTION:
After installing 12V battery, always check self-diagnosis results of all ECUs and erase DTC.
D4D engine
: 20 minutes
HRA2DDT
: 12 minutes
K9K engine
: 4 minutes
M9R engine
: 4 minutes
R9M engine
: 4 minutes
V9X engine
: 4 minutes
MWI
COMPONENT PARTS
MWI-7
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
SYSTEM DESCRIPTION
COMPONENT PARTS
METER SYSTEM
METER SYSTEM : Component Parts Location
INFOID:0000000010714977
LHD MODELS
Engine assembly (oil pan upper)
(R9M engine models)
Engine assembly (around the oil
cooler) (R9M engine models)
Behind luggage side finisher RH
JSNIA7417ZZ
MWI-8
< SYSTEM DESCRIPTION >
COMPONENT PARTS
RHD MODELS
No.
Component
Function
Fuel level sensor unit
(main)
Transmits the fuel level sensor signal to the combination meter.
ABS actuator and electric
unit (control unit)
• Transmits the each signal to the combination meter via CAN communication.
MWI-15, "METER SYSTEM : System Description"
• Refer to
BRC-14, "Component Parts Location"
for detailed installation location.
TCM (except R9M engine
models)
• Transmits the each signal to the combination meter via CAN communication.
MWI-15, "METER SYSTEM : System Description"
• Refer to
TM-235, "CVT CONTROL SYSTEM : Component Parts Location"
for detailed installation
location.
Ambient sensor
Transmits the ambient sensor signal to the combination meter.
TCM (R9M engine mod-
els)
• Transmits the each signal to the combination meter via CAN communication.
MWI-15, "METER SYSTEM : System Description"
• Refer to
TM-466, "CVT CONTROL SYSTEM : Component Parts Location"
for detailed installation
location.
ECM
• Transmits the each signal to the combination meter via CAN communication.
MWI-15, "METER SYSTEM : System Description"
• Refer to
EC-28, "ENGINE CONTROL SYSTEM : Component Parts Location"
440, "Component Parts Location"
(QR25DE), or
EC-812, "Component Parts Location"
detailed installation location.
IPDM E/R
• Transmits the oil pressure switch signal to the combination meter via CAN communication.
MWI-15, "METER SYSTEM : System Description"
• Refer to
PCS-5, "Component Parts Location"
for detailed installation location.
BCM
• Transmits the each signal to the combination meter via CAN communication.
MWI-15, "METER SYSTEM : System Description"
• Refer to
BCS-6, "BODY CONTROL SYSTEM : Component Parts Location"
for detailed installation
location.
Fuel level sensor unit
(sub)
Transmits the fuel level sensor signal to the combination meter.
Combination meter
MWI-13, "METER SYSTEM : Combination Meter"
.
Meter control switch
Transmits the meter control switch signal to the combination meter.
Steering switch
Transmits the steering switch signal to the combination meter.
NAVI control unit
Transmits the clock signal to the combination meter via AV communication.
Oil level sensor
Transmits the oil level sensor signal to the combination meter.
Engine oil pressure
switch
Transmits the oil pressure switch signal to IPDM E/R.
Fuel pump control module
(FPCM)
Transmits the fuel level sensor signal to the combination meter.
MWI
COMPONENT PARTS
MWI-9
< SYSTEM DESCRIPTION >
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
Engine assembly (oil pan upper)
(R9M engine models)
Engine assembly (around the oil
cooler) (R9M engine models)
Behind luggage side finisher RH
JSNIA7454ZZ
No.
Component
Function
Fuel level sensor unit
(main)
Transmits the fuel level sensor signal to the combination meter.
ABS actuator and electric
unit (control unit)
• Transmits the each signal to the combination meter via CAN communication.
Refer to
MWI-15, "METER SYSTEM : System Description"
.
• Refer to
BRC-14, "Component Parts Location"
for detailed installation location.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст