Nissan X-Trail 32. Manual — part 1775
RSU-22
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Wheel Alignment
INFOID:0000000010822800
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
Wheelarch Height
INFOID:0000000010822801
2ROW
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
3ROW
Item
Standard
Tire size
17 inch/18 inch
19 inch
Camber
Degree minute (Decimal degree)
Minimum
–1
°
15
′
(–1.25
°
)
Nominal
–0
°
30
′
(–0.50
°
)
Maximum
0
°
15
′
(0.25
°
)
Toe-in
Total toe-in
Distance
Minimum
—
Nominal
In 1.7 mm (In 0.067 in)
In 1.8 mm (In 0.071 in)
Maximum
—
Total toe-angle
Degree minute
(Decimal degree)
Minimum
Out 0
°
15
′
(Out 0.25
°
)
Nominal
In 0
°
10
′
(In 0.17
°
)
Maximum
In 0
°
35
′
(In 0.58
°
)
Item
Standard
Engine
MR20DD/QR25DE
R9M
Drive
2WD
4WD
2WD
4WD
Tire Size
17 inch
18 inch
17 inch
18 inch
17 inch
19 inch
17 inch
18 inch
19 inch
Front (Hf)
800 mm
(31.50 in)
803 mm
(31.61 in)
799 mm
(31.46 in)
801 mm
(31.54 in)
797 mm
(31.38 in)
802 mm
(31.57 in)
796 mm
(31.34 in)
799 mm
(31.46 in)
802 mm
(31.57 in)
Rear (Hr)
798 mm
(31.42 in)
800 mm
(31.50 in)
796 mm
(31.34 in)
799 mm
(31.46 in)
798 mm
(31.42 in)
802 mm
(31.57 in)
797 mm
(31.38 in)
799 mm
(31.46 in)
801 mm
(31.54 in)
SFA746B
SERVICE DATA AND SPECIFICATIONS (SDS)
RSU-23
< SERVICE DATA AND SPECIFICATIONS (SDS)
C
D
F
G
H
I
J
K
L
M
A
B
RSU
N
O
P
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
Item
Standard
Engine
R9M
Drive
2WD
4WD
Tire Size
17 inch
19 inch
17 inch
19 inch
Front (Hf)
797 mm (31.38 in)
802 mm (31.57 in)
797 mm (31.38 in)
802 mm (31.57 in)
Rear (Hr)
796 mm (31.34 in)
801 mm (31.54 in)
795 mm (31.30 in)
800 mm (31.50 in)
SFA746B
SB-1
RESTRAINTS
C
D
E
F
G
I
J
K
L
M
SECTION
SB
A
B
SB
N
O
P
CONTENTS
SEAT BELT
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Precaution Necessary for Steering Wheel Rota-
tion After Battery Disconnect . . . . . . . . .....
Precautions for Removing Battery Terminal . . .....
Precaution for Seat Belt Service . . . . . . . ...
SYSTEM DESCRIPTION . . . . . . . ..
COMPONENT PARTS . . . . . . . . . .
Seat belt pre-tensioner with Load limiter . . . . ...
Double pre-tensioner seat belt . . . . . . . . ..
Seat belt warning lamp/indicator . . . . . . . ...
Seat belt warning chime . . . . . . . . . . ....
SYSTEM . . . . . . . . . . . . . . . ..
WARNING/INDICATOR/CHIME LIST . . . . . .....
WARNING/INDICATOR/CHIME LIST : Warning
Lamp/Indicator Lamp . . . . . . . . . . . ....
WARNING/INDICATOR/CHIME LIST : Warning
Chime . . . . . . . . . . . . . . . . . ....
WARNING/INDICATOR/CHIME LIST : Warning
Lamp/Indicator (Information Display) . . . . . ....
REMOVAL AND INSTALLATION . . . .
FRONT SEAT BELT . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . . ..
SEAT BELT RETRACTOR . . . . . . . . . .
SEAT BELT RETRACTOR : Removal and Instal-
lation . . . . . . . . . . . . . . . . . .
SEAT BELT RETRACTOR : Inspection . . . . ..
SEAT BELT BUCKLE . . . . . . . . . . . .
SEAT BELT BUCKLE : Removal and Installation .
SEAT BELT BUCKLE : Inspection . . . . . . ..
REAR SEAT BELT . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . . .
SEAT BELT RETRACTOR . . . . . . . . . .
SEAT BELT RETRACTOR : Removal and Instal-
lation . . . . . . . . . . . . . . . . . .
SEAT BELT RETRACTOR : Inspection . . . . ..
SEAT BELT BUCKLE . . . . . . . . . . . .
SEAT BELT BUCKLE : Removal and Installation .
SEAT BELT BUCKLE : Inspection . . . . . . ..
THIRD SEAT BELT . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . . .
SEAT BELT RETRACTOR . . . . . . . . . .
SEAT BELT RETRACTOR : Removal and Instal-
lation . . . . . . . . . . . . . . . . . .
SEAT BELT RETRACTOR : Inspection . . . . ..
SEAT BELT BUCKLE . . . . . . . . . . . .
SEAT BELT BUCKLE : Removal and Installation .
SB-2
< PRECAUTION >
PRECAUTIONS
PRECAUTION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
INFOID:0000000010927761
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the “SRS AIR BAG” and
“SEAT BELT” of this Service Manual.
WARNING:
Always observe the following items for preventing accidental activation.
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision that would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see “SRS AIR BAG”.
• Never use electrical test equipment on any circuit related to the SRS unless instructed to in this Ser-
vice Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness
connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
Always observe the following items for preventing accidental activation.
• When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the
ignition ON or engine running, never use air or electric power tools or strike near the sensor(s) with
a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precaution Necessary for Steering Wheel Rotation After Battery Disconnect
INFOID:0000000010927762
CAUTION:
Comply with the following cautions to prevent any error and malfunction.
• Before removing and installing any control units, first turn the ignition power source and accessory
power source to the OFF, then disconnect both battery cables.
• After finishing work, confirm that all control unit connectors are connected properly, then re-connect
both battery cables.
• Always use CONSULT to perform self-diagnosis as a part of each function inspection after finishing
work. If a DTC is detected, perform trouble diagnosis according to self-diagnosis results.
For vehicle with steering lock unit, if the battery is disconnected or discharged, the steering wheel will lock and
cannot be turned.
If turning the steering wheel is required with the battery disconnected or discharged, follow the operation pro-
cedure below before starting the repair operation.
OPERATION PROCEDURE
1.
Connect both battery cables.
NOTE:
Supply power using jumper cables if battery is discharged.
2.
Open driver door.
3.
Turn the ignition switch to the ON position.
(At this time, the steering lock will be released.)
4.
Turn the ignition switch to OFF position with driver door open.
5.
Wait for 3 minutes or longer with driver door open.
NOTE:
• Do not close driver door because the steering wheel locks when driver door is closed.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст