Nissan X-Trail 32. Manual — part 1250
SIDE GUARD MOLDING
EXT-59
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
Never damage the front door panel.
1.
Apply a protective tape (A) on the door panel to protect the
painted surface from damage.
2.
Cut double-sided tape using a cutter (A).
3.
Disengage front side guard molding fixing clips using a remover
tool (A), and then remove front side guard molding.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Always replace double-sided tape with a new one, if front side guard molding is reused.
• Remove double-sided tape remaining on front door panel and back of front side guard molding with
a double-sided tape remover, after removing front side guard molding.
• When installing front side guard molding, visually check the clips, then replace them with new parts
if they are damaged.
• When installing front side guard molding, check that clips are securely in door panel holes, and
press them in.
• Never wash the vehicle within 24 hours after installing so as to keep adhesive.
REAR SIDE GUARD MOLDING
REAR SIDE GUARD MOLDING : Removal and Installation
INFOID:0000000010787473
REMOVAL
CAUTION:
Never damage the rear door panel.
JMKIB3035ZZ
JMKIB3036ZZ
: Clip
JMKIB3037ZZ
EXT-60
< REMOVAL AND INSTALLATION >
SIDE GUARD MOLDING
1.
Apply a protective tape (A) on the door panel to protect the
painted surface from damage.
2.
Cut double-sided tape using a cutter (A).
3.
Disengage rear side guard molding fixing clips using a remover
tool (A), and then remove rear side guard molding.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Always replace double-sided tape with a new one, if rear side guard molding is reused.
• Remove double-sided tape remaining on rear door panel and back of rear side guard molding with a
double-sided tape remover, after removing rear side guard molding.
• When installing rear side guard molding, visually check the clips, then replace them with new parts if
they are damaged.
• When installing rear side guard molding, check that clips are securely in door panel holes, and press
them in.
• Never wash the vehicle within 24 hours after installing so as to keep adhesive.
JMKIB3038ZZ
JMKIB3039ZZ
JMKIB3040ZZ
SILL COVER
EXT-61
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
SILL COVER
Exploded View
INFOID:0000000010787474
Sill cover
Grommet
: Clip
: Vehicle front
JMKIB3027ZZ
EXT-62
< REMOVAL AND INSTALLATION >
SILL COVER
Removal and Installation
INFOID:0000000010787475
REMOVAL
1.
Remove front fillet molding. Refer to
EXT-32, "FRONT FILLET MOLDING : Removal and Installation"
.
2.
Remove rear fillet molding. Refer to
EXT-33, "REAR FILLET MOLDING : Removal and Installation"
.
3.
Remove sill cover fixing screws
of sill cover front side.
4.
Remove sill cover fixing clip
of sill cover back side.
5.
Remove sill cover mounting bolts of sill cover lower side.
6.
Apply protective tape (A) on body to protect the painted surface from damage.
JMKIB3048ZZ
JMKIB3049ZZ
: Vehicle front
JMKIB3050ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст