Nissan X-Trail 32. Manual — part 1463
PERSONAL LAMP
INL-89
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
2.
Disengage lens fixing pawls using a remover tool (A), and then
remove lens.
CAUTION:
Use a remover tool wrapped in tape.
3.
Remove bulb.
: Pawl
JMLIA3630ZZ
INL-90
< REMOVAL AND INSTALLATION >
LUGGAGE ROOM LAMP
LUGGAGE ROOM LAMP
Exploded View
INFOID:0000000010755175
Removal and Installation
INFOID:0000000010755176
REMOVAL
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
INL-4, "Precautions for Removing Battery Terminal"
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it for pre-
venting damage to the bulb.
• The surface of the bulb is very hot just after the lamp is turned OFF. Never touch the glass surface of
the bulb with bare hands for preventing burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (due to dirt or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
1.
Apply protective tape (A) to luggage side lower finisher RH for
protecting it from damage.
Luggage room lamp base
Bulb
Shade
Luggage side lower finisher RH
: Pawl
: Vehicle front
JMLIA4875ZZ
JMLIA4885ZZ
LUGGAGE ROOM LAMP
INL-91
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
2.
Disengage luggage room lamp fixing pawl using a remover tool
(A).
3.
Disconnect luggage room lamp harness connector, and then remove luggage room lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010755177
LUGGAGE ROOM LAMP BULB
CAUTION:
• Disconnect the battery negative terminal or remove power circuit fuse when performing the opera-
tion for preventing electric leakage. Refer to
INL-4, "Precautions for Removing Battery Terminal"
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it for pre-
venting damage to the bulb.
• The surface of the bulb is very hot just after the lamp is turned OFF. Never touch the glass surface of
the bulb with bare hands for preventing burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (due to dirt or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
1.
Remove luggage room lamp. Refer to
INL-90, "Removal and Installation"
2.
Disengage shade fixing pawls using a remover tool (A), and
then remove shade.
CAUTION:
Use a remover tool wrapped in tape.
3.
Remove bulb.
: Pawl
JMLIA4886ZZ
: Pawl
JMLIA1700ZZ
INL-92
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
INFOID:0000000010755178
*1
: Without sunroof
*2
: With sunroof
Item
Type
Wattage (W)
Push-button ignition switch illumination
LED
—
Map lamp
LED
—
Map lamp illumination
(Integrated into map lamp assembly)
LED
—
Vanity mirror lamp
—
1.8
Glove box lamp
Wedge
1.4
Room lamp
*1
—
8.0
Personal lamp
*2
Wedge
8.0
Luggage room lamp
—
3.4
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст