Nissan Terrano r20e. Manual — part 427
Wiring Diagram — CHARGE —
TD27Ti ENGINE MODELS
YEL055D
CHARGING SYSTEM
SC-24
ZD30DDTi ENGINE MODELS
YEL056D
CHARGING SYSTEM
Wiring Diagram — CHARGE — (Cont’d)
SC-25
Trouble Diagnoses
Before conducting an alternator test, make sure that the battery is fully charged. A 30-volt voltmeter and suit-
able test probes are necessary for the test. The alternator can be checked easily by referring to the Inspec-
tion Table.
I
Before starting, inspect the fusible link.
I
Use fully charged battery.
WITH IC REGULATOR
NOTE:
I
If the inspection result is OK even though the charging system is malfunctioning, check the B terminal
connection. (Check the tightening torque.)
I
When field circuit is open, check condition of rotor coil, rotor slip ring and brush. If necessary, replace faulty
parts with new ones.
MALFUNCTION INDICATOR
The IC regulator warning function activates to illuminate “CHARGE” warning lamp, if any of the following
symptoms occur while alternator is operating:
I
Excessive voltage is produced.
I
No voltage is produced.
SEL338V
CHARGING SYSTEM
SC-26
Construction
MEL658K
YEL351D
CHARGING SYSTEM
SC-27
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст