Nissan Titan. Manual — part 443
HEADLINING
INT-21
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
HEADLINING
Removal and Installation
INFOID:0000000009881976
Crew Cab
AWJIA0952ZZ
1.
Headlining (without sunroof)
2.
Sun visor holder
3.
Sun visor assembly (RH)
4.
Sun visor assembly (LH)
5.
Front roof console
6.
Headlining (with sunroof)
INT-22
< REMOVAL AND INSTALLATION >
HEADLINING
King Cab
7.
Rear storage bin
8.
Rear roof console
9.
Rear roof console finisher
10. Lamp assembly
11. Rear roof console bracket
12. Assist grip
13. High mounted stop lamp access cov-
er (CHMSL)
14. Assist grip bracket
15. Plastic clips
AWJIA0953ZZ
1.
Headlining (standard)
2.
Sun visor assembly (RH)
3.
Sun visor assembly (LH)
4.
Headlining (optional)
5.
Sun visor holder
6.
Center roof console
HEADLINING
INT-23
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
REMOVAL
CAUTION:
Disconnect both terminals from battery in advance.
1. Remove the body side trim. Refer to
2. Remove the rear trim. Refer to
.
3. Remove the sun visor assemblies.
4. Insert a suitable thin tool (A) at approximately a 30 degree angle
into the sun visor holder notch on the front of the sun visor
holder (1) and press in the locking tab (B) to release it. While
holding in lock tab (B), turn the sun visor holder (1) 90 degrees
to release it from the headliner.
• If the sun visor holder (1) does not fully rotate, make sure that
the suitable thin tool (A) is pressing in on the locking tab (B)
and is not positioned under locking tab (B). Reinsert the suit-
able thin tool (A) as necessary to release the locking tab (B).
•
: Front
CAUTION:
Do not force the sun visor holder when removing as the
locking tab may be damaged if the suitable thin tool is not
positioned correctly.
5. Remove the front roof console (if equipped).
• Disconnect the harnesses.
6. Remove the rear roof console (if equipped).
• Disconnect the harnesses.
7. Remove the center roof console (if equipped).
• Disconnect the harnesses.
8. Remove the assist grips.
9. Remove the striker covers (if equipped).
10. Remove the room lamp.
11. Remove the headlining.
• Disconnect the harnesses.
12. Remove the rear audio control assembly from rear roof console (if equipped).
• Disconnect the harness.
13. Remove the lamp assemblies from roof console.
• Disconnect the harnesses.
14. Remove the rear roof console bracket (if equipped).
15. Remove the center roof console front bracket (if equipped).
16. Remove the assist grip brackets from roof (if equipped).
INSTALLATION
Installation is in the reverse order of removal.
7.
Assist grip
8.
Striker cover
9.
High mounted stop lamp access cov-
er (CHMSL)
10. Plastic clip
11. Coat hook
12. Room lamp
ALJIA0537ZZ
IP-1
BODY INTERIOR
C
D
E
F
G
H
I
K
L
M
SECTION
IP
A
B
IP
N
O
P
CONTENTS
INSTRUMENT PANEL
PRECAUTION . . . . . . . . . . . ...
PRECAUTIONS . . . . . . . . . . . . ...
Precaution for Work . . . . . . . . . . . . ..
PREPARATION . . . . . . . . . . .
PREPARATION . . . . . . . . . . . . ...
Special Service Tool . . . . . . . . . . . .....
Commercial Service Tool . . . . . . . . . . ..
SYMPTOM DIAGNOSIS . . . . . . . ...
SQUEAK AND RATTLE TROUBLE DIAG-
NOSES . . . . . . . . . . . . . . . .
Work Flow . . . . . . . . . . . . . . . .....
Generic Squeak and Rattle Troubleshooting . . ....
Diagnostic Worksheet . . . . . . . . . . . ...
REMOVAL AND INSTALLATION . . . ...
INSTRUMENT PANEL ASSEMBLY . . . . ..
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
CLUSTER LID A . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
CLUSTER LID C . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
CLUSTER LID D . . . . . . . . . . . ...
Exploded View . . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
INSTRUMENT LOWER PANEL RH AND
GLOVE BOX . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
INSTRUMENT LOWER PANEL LH . . . . ..
Removal and Installation . . . . . . . . . . .
A/T FINISHER . . . . . . . . . . . . ...
Removal and Installation . . . . . . . . . . .
CENTER CONSOLE . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . . .
Removal and Installation . . . . . . . . . . .
UNIT DISASSEMBLY AND ASSEMBLY .
INSTRUMENT LOWER PANEL RH AND
GLOVE BOX . . . . . . . . . . . . . .
Exploded View . . . . . . . . . . . . . . .
Disassembly and Assembly . . . . . . . . . .
CENTER CONSOLE ASSEMBLY . . . . .
Exploded View . . . . . . . . . . . . . . .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст