Nissan Titan. Manual — part 440
PREPARATION
INT-9
< PREPARATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
PREPARATION
PREPARATION
Special Service Tool
INFOID:0000000009881971
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Commercial Service Tool
INFOID:0000000009881972
Tool number
(Kent-Moore No.)
Tool name
Description
—
(J-39570)
Chassis ear
Locating the noise
—
(J-43980)
NISSAN Squeak and Rattle kit
Repairing the cause of noise
—
(J-46534)
Trim tool set
Removing trim components
SBT839
SBT840
AWJIA0483ZZ
(Kent-Moore No.)
Tool name
Description
(J-39565)
Engine ear
Locating the noise
SIIA0995E
INT-10
< REMOVAL AND INSTALLATION >
DOOR FINISHER
REMOVAL AND INSTALLATION
DOOR FINISHER
Removal and Installation
INFOID:0000000009881973
FRONT DOOR
Removal
1. Remove the power window switch assembly (if equipped).
• Disconnect the harness connectors.
2. Remove the pull handle cover.
• Remove the screws behind pull handle cover.
3. Remove the cap from pull handle escutcheon and remove the screw.
4. Remove the pull handle escutcheon.
1.
Power window switch assembly (if equipped) 2.
Armrest
3.
Front door finisher LH
4.
Pull handle cover
5.
Pull handle escutcheon
6.
Cap
7.
Door lock knob
8.
Step lamp
9.
Window crank handle (if equipped)
10. Window crank handle lock clip (if equipped)
11. Window crank handle escutcheon
(if equipped)
12. Seat memory switch (if equipped)
13. Inside door handle assembly
AWJIA0017ZZ
DOOR FINISHER
INT-11
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
• Remove the screws behind pull handle escutcheon.
5. Remove the armrest.
• Remove the screw behind armrest.
6. Remove the window crank handle, using a suitable tool (if equipped).
7. Remove the memory seat switch (if equipped).
• Disconnect the harness connector.
8. Remove the step lamp. Refer to
INL-71, "Removal and Installation"
9. Remove the door finisher and disconnect the lock cable and handle cable from the inside door handle
assembly.
10. Remove the door lock knob.
11. Remove the inside door handle assembly screws and remove the inside door handle assembly.
Installation
Installation is in the reverse order of removal.
REAR DOOR - CREW CAB
Removal
1.
Power window switch assembly
2.
Armrest
3.
Rear door finisher LH
4.
Pull handle cover
5.
Cap
6.
Pull handle escutcheon
7.
Door lock knob
8.
Step lamp (if equipped)
9.
Rear door tweeter
10. Inside door handle assembly
AWJIA0545GB
INT-12
< REMOVAL AND INSTALLATION >
DOOR FINISHER
1. Remove the power window switch assembly.
• Disconnect the harness connector.
2. Remove the pull handle cover.
• Remove the screws behind pull handle cover.
3. Remove the cap from pull handle escutcheon and remove screw.
4. Remove the pull handle escutcheon.
• Remove the screws behind pull handle escutcheon.
5. Remove the armrest.
• Remove the screws behind armrest.
6. Remove the step lamp (if equipped). Refer to
INL-71, "Removal and Installation"
.
7. Remove the door finisher and disconnect lock cable and handle cable from the door handle assembly.
• Disconnect the rear door tweeter speaker connector.
8. Remove the door lock knob.
9. Remove the rear door tweeter speaker.
Installation
Installation is in the reverse order of removal.
REAR DOOR - KING CAB
1.
Rear door LH
2.
Rear door finisher
3.
Armrest
4.
Seat belt retractor cover
AWJIA0546GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст