Nissan Pathfinder (2011 year). Manual — part 565
B1049 – B1052, B1054 – B1057 DRIVER AIRBAG MODULE
SRC-19
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
2.
WIRING HARNESS
Is there any visible damage to the harness?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 3
3.
CHECK SPIRAL CABLE CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect driver air bag module connector and combination switch (spiral cable) connector.
3. Check continuity between driver air bag module harness connector and combination switch (spiral cable)
harness connector.
4. Check continuity between driver air bag module harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 4
NO
>> Replace combination switch (spiral cable). Refer to
SR-7, "Removal and Installation"
.
4.
AIR BAG DIAGNOSIS SENSOR UNIT
Replace the air bag diagnosis sensor unit. Refer to
SR-16, "Removal and Installation"
>> GO TO 5
5.
DRIVER AIR BAG MODULE
Replace the driver air bag module. Refer to
SR-5, "Removal and Installation"
.
>> GO TO 6
6.
RELATED HARNESS
Replace the related harness.
>>
END
Driver air bag module
Combination switch (spiral cable)
Continuity
Connector
Terminal
Connector
Terminal
M101
1
M29
30
YES
2
23
M103
3
28
4
23
Driver air bag module
Ground
Continuity
Connector
Terminal
M101
1
NO
2
M103
3
4
2011 Pathfinder
SRC-20
< DTC/CIRCUIT DIAGNOSIS >
B1065 – B1068, B1070 – B1073 PASSENGER AIRBAG MODULE
B1065 – B1068, B1070 – B1073 PASSENGER AIRBAG MODULE
Description
INFOID:0000000006245262
DTC B1065 – B1068, B1070 – B1073 PASSENGER AIR BAG MODULE
The passenger air bag module is dual stage and wired to the air bag diagnosis sensor unit. The air bag diag-
nosis sensor unit will monitor for opens and shorts in detected lines to the passenger air bag module.
PART LOCATION
SRC-7, "SRS Component Parts Location"
DTC Logic
INFOID:0000000006245263
DTC DETECTION LOGIC
With CONSULT
Without CONSULT
DTC CONFIRMATION PROCEDURE (With CONSULT)
1.
INSPECTION START
Turn ignition switch ON.
>> GO TO 2.
2.
CHECK SELF-DIAG RESULT
Check for the DTC on CONSULT.
CONSULT name
DTC
DTC detecting condition
Repair order
ASSIST A/B MODULE
[OPEN]
B1065
Front passenger air bag module circuit
(AS1) is open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the air bag diagnosis sensor unit.
4.
Replace the front passenger air bag module.
5.
Replace the related harness.
B1070
Front passenger air bag module circuit
(AS2) is open.
ASSIST A/B MODULE
[VB-SHORT]
B1066
Front passenger air bag module circuit
(AS1) is shorted to a power supply circuit.
B1071
Front passenger air bag module circuit
(AS2) is shorted to a power supply circuit.
ASSIST A/B MODULE
[GND-SHORT]
B1067
Front passenger air bag module circuit
(AS1) is shorted to ground.
B1072
Front passenger air bag module circuit
(AS2) is shorted to ground.
ASSIST A/B MODULE
[SHORT]
B1068
Front passenger air bag module circuits
(AS1) are shorted to each other.
B1073
Front passenger air bag module circuits
(AS2) are shorted to each other.
AWHIA0312GB
2011 Pathfinder
B1065 – B1068, B1070 – B1073 PASSENGER AIRBAG MODULE
SRC-21
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
Is the DTC detected?
YES
>> Refer to
SRC-21, "Diagnosis Procedure (Component Diagnosis)"
.
NO
>> Inspection End.
DTC CONFIRMATION PROCEDURE (Without CONSULT)
NOTE:
SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 2
2.
IGNITION SWITCH
After air bag warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
>> GO TO 3
3.
WAIT TIME
Wait more than 3 seconds.
>> GO TO 4
4.
REPEAT STEPS
Repeat steps 1 to 3 twice.
>> GO TO 5
5.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 6
6.
DIAGNOSTIC MODE
SRS system is now in diagnostic mode and AIR BAG warning lamp flashes. Refer to
>>
END
Diagnosis Procedure (Component Diagnosis)
INFOID:0000000006245264
Recheck SRS after each replacement.
1.
HARNESS CONNECTOR
Is there any visible damage to the connector?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 2
2.
WIRING HARNESS
Is there any visible damage to the harness?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 3
3.
AIR BAG DIAGNOSIS SENSOR UNIT
Replace the air bag diagnosis sensor unit. Refer to
SR-16, "Removal and Installation"
2011 Pathfinder
SRC-22
< DTC/CIRCUIT DIAGNOSIS >
B1065 – B1068, B1070 – B1073 PASSENGER AIRBAG MODULE
>> GO TO 4
4.
FRONT PASSENGER AIR BAG MODULE
Replace the front passenger air bag module. Refer to
SR-9, "Removal and Installation"
.
>> GO TO 5
5.
RELATED HARNESS
Replace the related harness.
>>
END
2011 Pathfinder
B1134 – B1137 SIDE AIRBAG MODULE LH
SRC-23
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
B1134 – B1137 SIDE AIRBAG MODULE LH
Description
INFOID:0000000006245265
DTC B1134 – B1137 FRONT LH SIDE AIR BAG MODULE
The front LH side air bag module is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor
unit will monitor for opens and shorts in detected lines to the front LH side air bag module.
PART LOCATION
SRC-7, "SRS Component Parts Location"
DTC Logic
INFOID:0000000006245266
DTC DETECTION LOGIC
With CONSULT
Without CONSULT
DTC CONFIRMATION PROCEDURE (With CONSULT)
1.
INSPECTION START
Turn ignition switch ON.
>> GO TO 2.
2.
CHECK SELF-DIAG RESULT
Check for the DTC on CONSULT.
Is the DTC detected?
YES
>> Refer to
SRC-24, "Diagnosis Procedure (Component Diagnosis)"
.
NO
>> Inspection End.
DTC CONFIRMATION PROCEDURE (Without CONSULT)
NOTE:
SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
IGNITION SWITCH
CONSULT name
DTC
DTC detecting condition
Repair order
SIDE MODULE LH
[OPEN]
B1134
Front LH side air bag module circuit is
open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the air bag diagnosis sensor unit.
4.
Replace the front LH side air bag module.
5.
Replace the related harness.
SIDE MODULE LH
[VB-SHORT]
B1135
Front LH side air bag module circuit is
shorted to a power supply circuit.
SIDE MODULE LH
[GND-SHORT]
B1136
Front LH side air bag module circuit is
shorted to ground.
SIDE MODULE LH
[SHORT]
B1137
Front LH side air bag module circuits are
shorted to each other.
AWHIA0304GB
2011 Pathfinder
SRC-24
< DTC/CIRCUIT DIAGNOSIS >
B1134 – B1137 SIDE AIRBAG MODULE LH
Turn ignition switch ON.
>> GO TO 2
2.
IGNITION SWITCH
After air bag warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
>> GO TO 3
3.
WAIT TIME
Wait more than 3 seconds.
>> GO TO 4
4.
REPEAT STEPS
Repeat steps 1 to 3 twice.
>> GO TO 5
5.
IGNITION SWITCH
Turn ignition switch ON.
>> GO TO 6
6.
DIAGNOSTIC MODE
SRS system is now in diagnostic mode and AIR BAG warning lamp flashes. Refer to
>>
END
Diagnosis Procedure (Component Diagnosis)
INFOID:0000000006245267
Recheck SRS after each replacement.
1.
HARNESS CONNECTOR
Is there any visible damage to the connector?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 2
2.
WIRING HARNESS
Is there any visible damage to the harness?
YES or NO
YES
>> Replace the harness.
NO
>> GO TO 3
3.
AIR BAG DIAGNOSIS SENSOR UNIT
Replace the air bag diagnosis sensor unit. Refer to
SR-16, "Removal and Installation"
>> GO TO 4
4.
FRONT LH SIDE AIR BAG MODULE
Replace the front LH side air bag module.
>> GO TO 5
5.
RELATED HARNESS
2011 Pathfinder
B1134 – B1137 SIDE AIRBAG MODULE LH
SRC-25
< DTC/CIRCUIT DIAGNOSIS >
C
D
E
F
G
I
J
K
L
M
A
B
SRC
N
O
P
Replace the related harness.
>>
END
2011 Pathfinder
SRC-26
< DTC/CIRCUIT DIAGNOSIS >
B1129 – B1132 SIDE AIRBAG MODULE RH
B1129 – B1132 SIDE AIRBAG MODULE RH
Description
INFOID:0000000006245268
DTC B1129 – B1132 FRONT RH SIDE AIR BAG MODULE
The front RH side air bag module is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor
unit will monitor for opens and shorts in detected lines to the front RH side air bag module.
PART LOCATION
SRC-7, "SRS Component Parts Location"
DTC Logic
INFOID:0000000006245269
DTC DETECTION LOGIC
With CONSULT
Without CONSULT
DTC CONFIRMATION PROCEDURE (With CONSULT)
1.
INSPECTION START
Turn ignition switch ON.
>> GO TO 2.
2.
CHECK SELF-DIAG RESULT
Check for the DTC on CONSULT.
Is the DTC detected?
YES
>> Refer to
SRC-27, "Diagnosis Procedure (Component Diagnosis)"
.
NO
>> Inspection End.
DTC CONFIRMATION PROCEDURE (Without CONSULT)
NOTE:
SRS will not enter diagnosis mode if no malfunction is detected in user mode.
1.
IGNITION SWITCH
CONSULT name
DTC
DTC detecting condition
Repair order
SIDE MODULE RH
[OPEN]
B1129
Front RH side air bag module circuit is
open.
1.
Visually check the wiring harness connection.
2.
Replace the harness if it has visible damage.
3.
Replace the air bag diagnosis sensor unit.
4.
Replace the front RH side air bag module.
5.
Replace the related harness.
SIDE MODULE RH
[VB-SHORT]
B1130
Front RH side air bag module circuit is
shorted to a power supply circuit.
SIDE MODULE RH
[GND-SHORT]
B1131
Front RH side air bag module circuit is
shorted to ground.
SIDE MODULE RH
[SHORT]
B1132
Front RH side air bag module circuits are
shorted to each other.
AWHIA0305GB
2011 Pathfinder
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст