Nissan Xterra. Manual — part 710
WT-2
LOW TIRE PRESSURE WARNING LAMP
STAYS ON . . . . . . . . . . . . . . .
Low Tire Pressure Warning Lamp Stays On When
Ignition Switch Is Turned On . . . . . . . . ..
LOW TIRE PRESSURE WARNING LAMP
BLINKS . . . . . . . . . . . . . . . ..
Low Tire Pressure Warning Lamp Flashes When
Ignition Switch Is Turned On . . . . . . . . ..
HAZARD WARNING LAMPS FLASH . . . ...
Hazard Warning Lamps Flash When Ignition
Switch Is Turned On . . . . . . . . . . . ...
ID REGISTRATION CANNOT BE COMPLET-
ED . . . . . . . . . . . . . . . . . ..
ID Registration Cannot Be Completed . . . . ...
NOISE, VIBRATION AND HARSHNESS
(NVH) TROUBLESHOOTING . . . . . . .
NVH Troubleshooting Chart . . . . . . . . ...
PRECAUTION . . . . . . . . . . . .
PRECAUTIONS . . . . . . . . . . . . .
Precaution for Road Wheel . . . . . . . . ....
PREPARATION . . . . . . . . . . ..
PREPARATION . . . . . . . . . . . . .
Special Service Tool . . . . . . . . . . . ...
Commercial Service Tool . . . . . . . . . .
PERIODIC MAINTENANCE . . . . . ...
WHEEL . . . . . . . . . . . . . . . ..
Inspection . . . . . . . . . . . . . . . .
WHEEL AND TIRE ASSEMBLY . . . . . ...
Adjustment . . . . . . . . . . . . . . . ..
UNIT REMOVAL AND INSTALLATION .
REMOVAL AND INSTALLATION . . . . . .
Exploded View . . . . . . . . . . . . . .
Transmitter (Pressure Sensor) . . . . . . . .
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . ..
SERVICE DATA AND SPECIFICATIONS
(SDS) . . . . . . . . . . . . . . . . .
Road Wheel . . . . . . . . . . . . . . .
DIAGNOSIS AND REPAIR WORKFLOW
WT-3
< BASIC INSPECTION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Repair Work Flow
INFOID:0000000009483058
WORK FLOW
DETAILED FLOW
1.
CUSTOMER INFORMATION
Interview the customer to obtain detailed information about the symptom.
>> GO TO 2
2.
PRELIMINARY CHECK
Perform preliminary check. Refer to
.
>> GO TO 3
ALEIA0003GB
WT-32, "Self-Diagnosis (With CONSULT)"
WT-4
< BASIC INSPECTION >
DIAGNOSIS AND REPAIR WORKFLOW
3.
SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to
WT-32, "Self-Diagnosis (With CONSULT)"
>> GO TO 4
4.
SYMPTOM
>> GO TO 5
5.
MALFUNCTIONING PARTS
Repair or replace the applicable parts.
>> GO TO 6
6.
DRIVE TEST
1. Perform a drive test.
2. Check the low tire pressure warning lamp.
>> GO TO 7
7.
SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to
WT-32, "Self-Diagnosis (With CONSULT)"
Are any DTCs displayed?
YES
>> GO TO 5
NO
>> Inspection End.
INSPECTION AND ADJUSTMENT
WT-5
< BASIC INSPECTION >
C
D
F
G
H
I
J
K
L
M
A
B
WT
N
O
P
INSPECTION AND ADJUSTMENT
Preliminary Check
INFOID:0000000009483059
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
• Activate and display TPMS transmitter IDs
• Display tire pressure reported by the TPMS transmitter
• Read TPMS DTCs
• Register TPMS transmitter IDs
1.
TIRE PRESSURE
Check all tire pressures. Refer to
Do tire pressures match specification?
YES
>> GO TO 2.
NO
>> Adjust tire pressures to specified value.
2.
LOW TIRE PRESSURE WARNING LAMP
Check low tire pressure warning lamp activation.
Does the low tire pressure warning lamp activate for one second when ignition switch is turned ON?
YES
>> GO TO 3.
NO
WT-39, "Low Tire Pressure Warning Lamp Does Not Come On When Ignition Switch Is
.
3.
BCM CONNECTOR
1. Disconnect BCM harness connectors.
2. Check terminals for damage or loose connections.
3. Reconnect harness connectors.
Are BCM connectors damaged or loose?
YES
>> Repair or replace damaged parts.
NO
>> GO TO 4.
4.
TRANSMITTER ACTIVATION TOOL
Check battery in transmitter activation tool.
Is transmitter activation tool battery fully charged?
YES
>> Perform self-diagnosis. Refer to
WT-32, "Self-Diagnosis (With CONSULT)"
NO
>> Replace battery in transmitter activation tool.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст