Nissan Teana J32. Manual — part 593
EXL-342
< ON-VEHICLE MAINTENANCE >
[HALOGEN TYPE]
FRONT FOG LAMP AIMING ADJUSTMENT
A
: Cutoff line
B
: High illuminance area
H
: Horizontal center line of front fog lamp
V
: Vertical center line of front fog lamp
X
: Cutoff line height
FRONT COMBINATION LAMP
EXL-343
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
ON-VEHICLE REPAIR
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000003773730
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000003773731
REMOVAL
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
1.
Front combination lamp
JPLIA1087ZZ
1.
Front turn signal lamp bulb
2.
Front turn signal lamp bulb socket
3.
Halogen bulb (HI)
4.
Seal packing
5.
Resin cap
6.
Halogen bulb (LO)
7.
Parking lamp bulb socket
8.
Parking lamp bulb
9.
Headlamp housing assembly
JPLIA1105ZZ
EXL-344
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
FRONT COMBINATION LAMP
1.
Remove the front bumper fascia. Refer to
.
2.
Remove the headlamp mounting bolts.
3.
Remove the harness clips from the headlamp housing.
4.
Pull out the headlamp assembly forward the vehicle.
5.
Disconnect the connector before removing the headlamp assembly.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to
Replacement
INFOID:0000000003773732
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
HEADLAMP BULB (LO)
1.
Remove the fender protector. Keep a service area. Refer to
EXT-22, "FENDER PROTECTOR : Exploded
.
2.
Rotate the resin cap counterclockwise and unlock it.
3.
Disconnect the headlamp bulb (LO) connector.
4.
Rotate the bulb counterclockwise and unlock it.
5.
Remove the bulb from the headlamp housing.
HEADLAMP BULB (HI)
1.
Remove the fender protector. Keep a service area. Refer to
EXT-22, "FENDER PROTECTOR : Exploded
.
2.
Disconnect the headlamp bulb (HI) connector.
3.
Rotate the bulb counterclockwise and unlock it.
4.
Remove the bulb from the headlamp housing.
PARKING LAMP BULB
1.
Remove the fender protector. Keep a service area. Refer to
EXT-22, "FENDER PROTECTOR : Exploded
.
2.
Rotate the parking lamp bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the parking lamp bulb socket.
FRONT TURN SIGNAL LAMP BULB
1.
Remove the relay box cover
*
*: When replace a left
2.
Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
3.
Remove the bulb from the front turn signal lamp bulb socket.
Disassembly and Assembly
INFOID:0000000003773733
DISASSEMBLY
1.
Rotate the resin cap counterclockwise and unlock it
2.
Disconnect the headlamp bulb (LO) connector.
3.
Rotate the headlamp bulb (LO) counterclockwise and unlock it
4.
Remove the bulb from the headlamp housing.
5.
Rotate the headlamp bulb (HI) counterclockwise and unlock it
FRONT COMBINATION LAMP
EXL-345
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
6.
Remove the bulb from the headlamp housing.
7.
Rotate the parking lamp bulb socket counterclockwise and unlock it.
8.
Remove the bulb from the parking lamp bulb socket.
9.
Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
10. Remove the bulb from the front turn signal lamp bulb socket.
ASSEMBLY
Assemble in the reverse order of disassembly.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст