Nissan Teana J32. Manual — part 594

EXL-346

< ON-VEHICLE REPAIR >

[HALOGEN TYPE]

FRONT FOG LAMP

FRONT FOG LAMP

Exploded View

INFOID:0000000003894360

Removal and Installation

INFOID:0000000003894361

CAUTION:

Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.

Remove the front fender protector. Keep a service area. Refer to

EXT-22, "FENDER PROTECTOR :

Exploded View"

.

2.

Remove the front fog lamp connector.

3.

Remove the mounting nuts. And then remove the front fog lamp.

NOTE:
Never remove a front fog lamp bracket, when the front fog lamp is replaced.

INSTALLATION

Installation is the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to

EXL-341, "Description"

.

Replacement

INFOID:0000000003894362

CAUTION:

• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.

Never touch bulb by hand while it is lit or right after being turned off.

• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

FRONT FOG LAMP BULB

1.

Remove the front fender protector. Keep a service area. Refer to

EXT-22, "FENDER PROTECTOR :

Exploded View"

.

1.

Front fog lamp bracket

2.

Front fog lamp

JPLIA1090ZZ

FRONT FOG LAMP

EXL-347

< ON-VEHICLE REPAIR >

[HALOGEN TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

2.

Remove the front fog lamp bulb connector (1).

3.

Rotate the bulb (2) counterclockwise and unlock it.

JPLIA1091ZZ

EXL-348

< ON-VEHICLE REPAIR >

[HALOGEN TYPE]

OPTICAL SENSOR

OPTICAL SENSOR

Exploded View

INFOID:0000000003894363

Removal and Installation

INFOID:0000000003894364

REMOVAL

1.

Insert an appropriate tool between the optical sensor and the speaker grille (RH). Pull out the optical sen-
sor upward.

2.

Disconnect the optical sensor connector. And then remove the optical sensor.

INSTALLATION

Install in the reverse order of removal.

1.

Optical sensor

JPLIA1092ZZ

LIGHTING & TURN SIGNAL SWITCH

EXL-349

< ON-VEHICLE REPAIR >

[HALOGEN TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

LIGHTING & TURN SIGNAL SWITCH

Exploded View

INFOID:0000000003894365

Removal and Installation

INFOID:0000000003894366

Lighting & turn signal switch is integrated in the combination switch. Refer to

BCS-79, "Exploded View"

.