Nissan Teana J32. Manual — part 320
DOOR LOCK ACTUATOR
DLK-63
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REAR LH : Component Function Check
INFOID:0000000003794855
1.
CHECK FUNCTION
1.
Use CONSULT-III to perform Active Test (“DOOR LOCK”).
2.
Touch “ALL LCK” or “ALL UNLK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-63, "REAR LH : Diagnosis Procedure"
.
REAR LH : Diagnosis Procedure
INFOID:0000000003794856
1.
CHECK DOOR LOCK ACTUATOR OUTPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect rear door lock assembly LH.
3.
Check voltage between rear door lock assembly LH harness connector and ground.
Is the inspection result normal?
YES
>> Replace rear door lock assembly LH. Refer to
DLK-202, "DOOR ASSEMBLY : Removal and
NO
>> GO TO 2.
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1.
Disconnect BCM connector.
2.
Check continuity between BCM harness connector and rear door lock assembly LH harness connector.
3.
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-78, "Removal and Installation"
NO
>> Repair or replace harness.
REAR RH
REAR RH : Description
INFOID:0000000003794857
Locks/unlocks the door with the signal from BCM.
REAR RH : Component Function Check
INFOID:0000000003794858
1.
CHECK FUNCTION
(+)
(–)
Condition
Voltage (V)
(Approx.)
Rear door lock assembly LH
Connector
Terminal
D85
1
Ground
Door lock and
unlock switch
LOCK
0
→
Battery voltage
→
0
2
UNLOCK
0
→
Battery voltage
→
0
BCM
Rear door lock assembly LH
Continuity
Connector
Terminal
Connector
Terminal
M119
8
D85
1
Existed
10
2
BCM
Ground
Continuity
Connector
Terminal
M119
8
Not existed
10
DLK-64
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
DOOR LOCK ACTUATOR
1.
Use CONSULT-III to perform Active Test (“DOOR LOCK”).
2.
Touch “ALL LCK” or “ALL UNLK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-64, "REAR RH : Diagnosis Procedure"
.
REAR RH : Diagnosis Procedure
INFOID:0000000003794859
1.
CHECK DOOR LOCK ACTUATOR OUTPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect rear door lock assembly RH.
3.
Check voltage between rear door lock assembly RH harness connector and ground.
Is the inspection result normal?
YES
>> Replace rear door lock assembly RH. Refer to
DLK-208, "DOOR ASSEMBLY : Removal and
NO
>> GO TO 2.
2.
CHECK DOOR LOCK ACTUATOR CIRCUIT
1.
Disconnect BCM connector.
2.
Check continuity between BCM harness connector and rear door lock assembly RH harness connector.
3.
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-78, "Removal and Installation"
NO
>> Repair or replace harness.
(+)
(–)
Condition of door lock and
unlock switch
Voltage (V)
(Approx.)
Rear door lock assembly RH
Connector
Terminal
D105
1
Ground
UNLOCK
0
→
Battery voltage
→
0
2
LOCK
0
→
Battery voltage
→
0
BCM
Rear door lock assembly RH
Continuity
Connector
Terminal
Connector
Terminal
M119
8
D105
2
Existed
10
1
BCM
Ground
Continuity
Connector
Terminal
M119
8
Not Existed
10
TRUNK LID OPENER ACTUATOR
DLK-65
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
TRUNK LID OPENER ACTUATOR
Description
INFOID:0000000003794860
Trunk lid opener actuator open trunk lid from BCM.
Component Function Check
INFOID:0000000003794861
1.
CHECK FUNCTION
1.
Perform Active Test (“TRUNK/GLASS HATCH”) with CONSULT-III.
2.
Touch “OPEN” and check that trunk lid opens.
Is the inspection result normal?
YES
>> Trunk lid opener actuator is OK.
NO
>> Refer to
.
Diagnosis Procedure
INFOID:0000000003794862
1.
CHECK TRUNK LID OPENER INPUT SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect trunk lid lock assembly.
3.
Check voltage between trunk lid lock assembly harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> GO TO 2.
2.
CHECK TRUNK LID OPENER ACTUATOR CIRCUIT
1.
Disconnect BCM connector.
2.
Check continuity between BCM harness connector and trunk lid lock assembly (trunk lid opener actuator)
harness connector.
3.
Check continuity between BCM harness connector and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
BCS-78, "Removal and Installation"
NO
>> Repair or replace harness.
3.
CHECK TRUNK LID OPENER ACTUATOR GROUND CIRCUIT
Check continuity between trunk lid lock assembly (trunk lid opener actuator) harness connector and ground.
(+)
(–)
Condition
Voltage (V)
(Approx.)
Trunk lid lock assembly
(trunk lid opener actuator)
Connector
Terminal
T5
2
Ground
Trunk lid opener switch is ON
0
→
Battery voltage
→
0
BCM
Trunk lid lock assembly
(trunk lid opener actuator)
Continuity
Connector
Terminal
Connector
Terminal
M120
23
T5
2
Existed
BCM
Ground
Continuity
Connector
Terminal
M120
23
Not existed
DLK-66
< COMPONENT DIAGNOSIS >
[WITH INTELLIGENT KEY SYSTEM]
TRUNK LID OPENER ACTUATOR
Is the inspection normal?
YES
>> Replace trunk lid lock assembly. Refer to
DLK-214, "TRUNK LID ASSEMBLY : Removal and
NO
>> Repair or replace harness.
Trunk lid lock assembly
Ground
Continuity
Connector
Terminal
T5
3
Existed
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст