Nissan Teana J32. Manual — part 556
EXL-194
< ON-VEHICLE REPAIR >
[XENON TYPE]
REAR FOG LAMP
REAR FOG LAMP
Exploded View
INFOID:0000000003774379
Removal and Installation
INFOID:0000000003774380
CAUTION:
Disconnect battery negative terminal or remove the fuse.
REMOVAL
1.
Disconnect the rear fog lamp connector.
2.
Remove the nuts. And then remove the rear fog lamp rim.
3.
Remove the screw. And then remove the rear fog lamp from the rear fog lamp rim.
INSTALLATION
Installation is the reverse order of removal.
Replacement
INFOID:0000000003774381
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
REAR FOG LAMP BULB
1.
Turn the bulb socket (1) counterclockwise and unlock it.
2.
Remove the bulb (2) from the rear fog lamp bulb socket.
1.
Rear fog lamp
2.
Rear fog lamp bracket
3.
Rear fog lamp finisher
JPLIA1102ZZ
JPLIA1103ZZ
LICENSE PLATE LAMP
EXL-195
< ON-VEHICLE REPAIR >
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LICENSE PLATE LAMP
Exploded View
INFOID:0000000003773642
Removal and Installation
INFOID:0000000003773643
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the trunk lid finisher inner. Refer to
2.
Remove the trunk lid finisher outer. Refer to
3.
Remove the license plate lamp while pushing a resin clip.
4.
Disconnect the license plate lamp connector.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000003773644
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
LICENSE PLATE LAMP BULB
1.
Remove the trunk lid finisher inner. Refer to
1.
License plate lamp
A.
Resin clip
JPLIA1100ZZ
EXL-196
< ON-VEHICLE REPAIR >
[XENON TYPE]
LICENSE PLATE LAMP
2.
Turn the license plate lamp bulb socket (1) counterclockwise
and unlock it.
3.
Remove the bulb (2) from the license plate lamp bulb socket.
JPLIA1101ZZ
SERVICE DATA AND SPECIFICATIONS (SDS)
EXL-197
< SERVICE DATA AND SPECIFICATIONS (SDS)
[XENON TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
INFOID:0000000003774382
Item
Type
Wattage (W)
Front combination lamp
Headlamp (HI)
H9
65
Headlamp (LO)
D2R
35
Parking Lamp
W5W
5
Front turn signal
WY21W (Amber)
21
Front fog lamp
H11
55
Front side turn signal lamp (integrated into the door mirror)
LED
—
Rear combination lamp
Stop/tail lamp
LED
—
Rear turn signal lamp
S25 (Amber)
21
Back-up lamp
W16W
16
License plate lamp
W5W
5
High-mounted stop lamp
LED
—
Rear fog lamp
W21W
21
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст