Nissan Teana J32. Manual — part 764
INSTRUMENT PANEL ASSEMBLY
IP-13
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
[ ]: Number indicates step in removal procedures.
REMOVAL
1.
Remove instrument finisher D.
• Remove instrument finisher D (1) fixing clips with remover tool
(A).
• Pull back instrument finisher D, and then remove instrument
finisher D.
2.
Remove instrument finisher E.
• Remove instrument finisher E (1) fixing clips with remover tool
(A).
• Pull back instrument finisher E, and then remove instrument
finisher E.
3.
Remove front body side welt LH. Refer to
INT-39, "Removal and Installation"
.
4.
Remove front pillar garnish LH. Refer to
INT-39, "Removal and Installation"
Steering wheel
[26]
Steering column cover
[27]
[6]
[9]
Combination switch
[28]
[7]
[10]
Spiral cable
[29]
Instrument finisher A
[30]
[8]
[5]
[11]
Cluster lid A
[31]
[9]
[12]
Combination meter
[32]
[10]
Cluster lid D
[33]
Push button ignition switch
[34]
[13]
Cluster lid lower finisher
[35]
[14]
Cluster lid C
[36]
[15]
Instrument finisher B
[16]
AV C/U (audio unit)
[37]
[3]
Display unit
[38]
Center speaker grille
[39]
Center speaker
[40]
Instrument panel assembly
[41]
: Clip
JMJIA1892ZZ
: Clip
JMJIA1893ZZ
IP-14
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
5.
Remove speaker grille LH.
• Pull up and back speaker grille LH (1).
• Disconnect sunload sensor (2) harness connector.
6.
Remove front squawker LH. Refer to
AV-41, "Removal and Installation"
.
7.
Remove instrument side finisher LH.
• Insert a remover tool (A) into lower space.
• Pull the instrument side finisher LH (1) crosswise.
8.
Remove hood opener lever fixing bolts. Refer to
DLK-220, "Removal and Installation"
.
9.
Remove fuse block lid.
• Open the fuse block lid (1).
• Pull fuse block lid, backward to disengage from instrument
lower panel LH.
10. Remove instrument lower panel LH.
• Remove instrument lower panel LH (1) fixing screw (A).
• Pull instrument lower panel LH, backward to disengage from
instrument panel assembly.
• Release data link connector (pawl) then remove it from instru-
ment lower panel LH.
• Disconnect harness connectors and aspirator duct.
: Clip
: Pawl
JMJIA1894ZZ
: Pawl
: Metal clip
JMJIA1895ZZ
: Pawl
JMJIA1896ZZ
: Clip
: Pawl
JMJIA1897ZZ
INSTRUMENT PANEL ASSEMBLY
IP-15
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
11. Remove instrument lower cover LH.
• Disengage instrument lower cover LH (1) fixing pawl and
metal clips.
• Pull back instrument lower cover LH.
12. Remove front body side welt RH. Refer to
INT-39, "Removal and Installation"
13. Remove front pillar garnish RH. Refer to
INT-39, "Removal and Installation"
.
14. Disconnect antenna connector (A).
15. Remove harness clip (B).
16. Remove speaker grille RH.
• Pull up and back speaker grille RH (1).
• Disconnect optical sensor (2) harness connector.
17. Remove front squawker RH. Refer to
AV-41, "Removal and Installation"
18. Remove instrument side finisher RH.
• Insert a remover tool (A) into lower space.
• Pull the instrument side finisher RH (1) crosswise.
: Pawl
: Metal clip
JMJIA1898ZZ
JMJIA1922ZZ
: Clip
: Pawl
JMJIA1899ZZ
: Pawl
: Metal clip
JMJIA1900ZZ
IP-16
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
19. Remove glove box assembly.
• Remove glove box assembly (1) fixing screws (A).
• Open the glove box lid.
• Remove glove box assembly fixing screws (B).
• Pull back glove box assembly.
• Disconnect harness connector.
20. Remove DVD player. Refer to
AV-650, "Removal and Installation"
.
21. Remove instrument side panel RH.
• Remove instrument side panel RH (1) fixing screw (A).
• Pull toward the direction the arrow is pointing.
22. Remove instrument lower cover RH.
• Disengage instrument lower cover RH (1) fixing clip, pawl and
metal clips.
• Pull the instrument lower cover RH crosswise.
23. Remove selector lever knob. Refer to
TM-155, "Removal and Installation"
.
: Pawl
JMJIA1901ZZ
: Clip
: Pawl
JMJIA1902ZZ
: Clip
: Pawl
: Metal clip
JMJIA1903ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст