Nissan Teana J32. Manual — part 765
INSTRUMENT PANEL ASSEMBLY
IP-17
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
24. Remove console switch panel.
• Disengage pawls of console switch panel (1) with remover tool
(A).
• Pull up console switch panel.
25. Remove console finisher assembly.
• Put selector lever in the [N] position.
• Remove console finisher assembly (1) fixing metal clips and
pawls sequentially from the front side with remover tool.
• Pull console finisher assembly, upward to disengage from cen-
ter console.
• Disconnect harness connectors.
26. Remove control device upper case.
• Put selector lever in the [P] position.
• Remove control device upper case (1) mounting screws (A).
• Pull control device upper case, upward to disengage from con-
trol device assembly.
• Disconnect harness clip (B).
27. Remove console rear finisher.
• Pull back console rear finisher (1) by using a remover tool (A),
then disengage pawls and metal clips.
• Disconnect inside key antenna connector.
28. Remove center console assembly.
• Remove center console fixing screws (A).
: Pawl
JMJIA1904ZZ
: Pawl
: Metal clip
JMJIA1905ZZ
JMJIA1906ZZ
: Pawl
: Metal clip
JMJIA1907ZZ
JMJIA1908ZZ
IP-18
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
• Put front seat to the front most position.
• Remove center console fixing screws (B).
• Put front seat to the rear most position.
• Lift up center console assembly back side.
• Disconnect harness connectors.
29. Remove steering wheel assembly. Refer to
ST-12, "Removal and Installation"
30. Remove steering column covers.
• Remove steering column cover fixing screws (A).
• Pull up steering column upper cover (1), and then remove
steering column upper cover.
• Pull down steering column lower cover (2), and then remove
steering column lower cover.
31. Remove combination switch. Refer to
BCS-79, "Removal and Installation"
32. Remove spiral cable. Refer to
SR-9, "Removal and Installation"
.
33. Remove instrument finisher A.
Pull back instrument finisher A (1), and disengage metal clips.
34. Remove cluster lid A.
• Disconnect meter control switch harness connector (A).
JMJIA1909ZZ
: Pawl
JMJIA1910ZZ
: Metal clip
JMJIA1911ZZ
JMJIA1912ZZ
INSTRUMENT PANEL ASSEMBLY
IP-19
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
• Pull back cluster lid A (1), and disengage metal clips.
35. Remove combination meter. Refer to
MWI-126, "Removal and Installation"
.
36. Remove cluster lid D.
• Remove cluster lid D (1) fixing pawls and metal clip with
remover tool (A).
• Pull back cluster lid D.
• Disconnect harness connectors.
37. Remove push button ignition switch. Refer to
SEC-205, "Removal and Installation"
.
38. Remove cluster lid lower finisher.
• Remove cluster lid lower finisher (1) fixing screws (A).
• Pull back cluster lid lower finisher.
39. Remove cluster lid C.
• Remove cluster lid C (1) fixing screws (A).
• Pull back cluster lid C.
• Disconnect harness connector.
: Metal clip
JMJIA1913ZZ
: Pawl
: Metal clip
JMJIA1915ZZ
: Pawl
JMJIA1916ZZ
JMJIA1917ZZ
IP-20
< ON-VEHICLE REPAIR >
INSTRUMENT PANEL ASSEMBLY
40. Remove AV C/U (or Audio unit).
• AV C/U: Refer to
AV-648, "Removal and Installation"
• Audio unit: Refer to
AV-37, "Removal and Installation"
• Remove AV C/U (or Audio unit) (1) fixing screws (A).
• Pull back AV C/U (or Audio unit).
• Disconnect harness connectors.
41. Remove display unit.
• Remove display unit (1) fixing screws (A).
• Pull toward the arrow direction.
• Disconnect harness connector.
42. Remove center speaker grille.
• Disengage center speaker grille (1) fixing clips and pawls with
remover tool (A).
• Pull up center speaker grille.
43. Remove center speaker (with BOSE AUDIO). Refer to
AV-384, "Removal and Installation"
.
44. Disconnect front passenger air bag module connector. Refer to
.
45. Remove front passenger air bag module fixing bolt. Refer to
SR-12, "Removal and Installation"
46. Remove instrument panel assembly mounting bolt (A), screws (B) and clips (C).
47. Remove instrument panel assembly.
JMJIA1918ZZ
JMJIA1919ZZ
: Clip
: Pawl
JMJIA1920ZZ
JMJIA1921ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст