Nissan Teana J32. Manual — part 34
MEMORY FUNCTION DOES NOT OPERATE
ADP-129
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
SEAT SLIDING : Diagnosis Procedure
INFOID:0000000003759226
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-125, "SEAT SLIDING : Diagnosis Procedure"
2.
CHECK SLIDING SENSOR
Check sliding sensor.
Refer to
ADP-60, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT RECLINING
SEAT RECLINING : Diagnosis Procedure
INFOID:0000000003759227
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-126, "SEAT RECLINING : Diagnosis Procedure"
2.
CHECK RECLINING SENSOR
Check reclining sensor.
Refer to
ADP-62, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT LIFTING (FRONT)
SEAT LIFTING (FRONT) : Diagnosis Procedure
INFOID:0000000003759228
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-126, "SEAT LIFTING (FRONT) : Diagnosis Procedure"
.
2.
CHECK LIFTING SENSOR (FRONT)
Check lifting sensor (front).
Refer to
ADP-130
< SYMPTOM DIAGNOSIS >
MEMORY FUNCTION DOES NOT OPERATE
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
SEAT LIFTING (REAR)
SEAT LIFTING (REAR) : Diagnosis Procedure
INFOID:0000000003759229
1.
CHECK MANUAL OPERATION
Check manual operation.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
ADP-127, "SEAT LIFTING (REAR) : Diagnosis Procedure"
2.
CHECK LIFTING SENSOR (REAR)
Check lifting sensor (rear).
Refer to
ADP-66, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace the malfunctioning parts.
3.
CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
MEMORY INDICATE DOES NOT OPERATE
ADP-131
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
K
L
M
A
B
ADP
N
O
P
MEMORY INDICATE DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000003759224
1.
CHECK MEMORY INDICATOR
Check memory indicator.
Refer to
ADP-76, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Repair or replace the malfunctioning parts.
2.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
ADP-132
< SYMPTOM DIAGNOSIS >
ENTRY/EXIT ASSIST FUNCTION DOES NOT OPERATE
ENTRY/EXIT ASSIST FUNCTION DOES NOT OPERATE
Diagnosis Procedure
INFOID:0000000003759233
1.
CHECK SYSTEM SETTING
1.
Check system setting.
Refer to
ADP-10, "SYSTEM SETTING : Special Repair Requirement"
2.
Check the operation.
Is the inspection result normal?
YES
>> Entry/Exit function is OK.
NO
>> GO TO 2.
2.
PERFORM SYSTEM INITIALIZATION
1.
Perform system initialization.
Refer to
ADP-8, "SYSTEM INITIALIZATION : Special Repair Requirement"
2.
Check the operation.
Is the inspection result normal?
YES
>> Entry/Exit function is OK.
NO
>> GO TO 3.
3.
CHECK DTC
Selector lever in Position signal, ignition position signal and key slot signal.
• “Self Diagnostic Result” with BCM. Refer to
.
• “Self Diagnostic Result” with TCM. Refer to
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace the malfunctioning parts.
4.
CHECK FRONT DOOR SWITCH (DRIVER SIDE)
Check front door switch (driver side).
Refer to
ADP-58, "Component Function Check"
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace the malfunctioning parts.
5.
CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
>> Check intermittent incident. Refer to
GI-35, "Intermittent Incident"
.
NO
>> GO TO 1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст