Nissan Teana J32. Manual — part 82
AV
STEERING ANGLE SENSOR
AV-183
< ON-VEHICLE REPAIR >
[BASE AUDIO AND DISPLAY SYSTEM]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
STEERING ANGLE SENSOR
Exploded View
INFOID:0000000003940179
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000003940180
REMOVAL
1.
Remove spiral cable.
2.
Remove steering angle sensor mounting screws.
3.
Remove steering angle sensor.
INSTALLATION
Installation is the reverse order of removal.
JSNIA0135ZZ
1.
Spiral cable
2.
Steering angle sensor
AV-184
< ON-VEHICLE REPAIR >
[BASE AUDIO AND DISPLAY SYSTEM]
ANTENNA FEEDER (RADIO)
ANTENNA FEEDER (RADIO)
Harness Layout
INFOID:0000000003882826
JPNIA1033GB
AV
DIAGNOSIS AND REPAIR WORKFLOW
AV-185
< BASIC INSPECTION >
[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
M
B
A
O
P
BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
INFOID:0000000003765632
OVERALL SEQUENCE
• Reference 1··· Refer to
AV-211, "CONSULT-III Function (MULTI AV)"
.
• Reference 2··· Refer to
.
• Reference 3··· Refer to
DETAILED FLOW
1.
INTERVIEW AND SYMPTOM CONFIRMATION
Check the malfunction symptoms by performing the following items.
• Interview the customer to obtain the malfunction information (conditions and environment when the malfunc-
tion occurred).
• Check the symptom.
Is the occurred symptom malfunction?
YES
>> GO TO 2.
NO
>> INSPECTION END
2.
DIAGNOSIS WITH CONSULT-III
JSNIA0732GB
AV-186
< BASIC INSPECTION >
[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS AND REPAIR WORKFLOW
1.
Connect CONSULT-III and perform a self-diagnosis for “MULTI AV”. Refer to
NOTE:
Skip to step 4 of the diagnosis procedure if “MULTI AV” is not displayed.
2.
Check if any DTC is displayed in the self-diagnosis results.
Is DTC displayed?
YES
>> GO TO 3.
NO
>> GO TO 4.
3.
TROUBLE DIAGNOSIS FOR DTC
1.
Check the DTC indicated in the self-diagnosis results.
2.
Perform the relevant diagnosis referring to the DTC Index. Refer to
>> GO TO 5.
4.
TROUBLE DIAGNOSIS FOR SYMPTOMS
Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to
.
>> GO TO 5.
5.
ERROR PART REPAIR
1.
Repair or replace the identified malfunctioning parts.
2.
Perform a self-diagnosis for “MULTI AV” with CONSULT-III.
NOTE:
Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC
has been indicated in the self-diagnosis results.
3.
Check that the symptom does not occur.
Does the symptom occur?
YES
>> GO TO 1.
NO
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст