Nissan Tiida C11. Manual — part 1411
TRANSAXLE ASSEMBLY
TM-695
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
4.
Install oil channel and mainshaft front bearing outer race into
clutch housing using Tool (A).
CAUTION:
• Do not reuse oil channel.
• Replace mainshaft front bearing outer race and mainshaft
front bearing inner race as a set.
5.
Install input shaft oil seal (1) into clutch housing using Tool (A).
6.
Install snap ring (1) and oil channel (2) onto transaxle case.
CAUTION:
Do not reuse snap ring or oil channel.
7.
Install bearing preloading shim and mainshaft rear bearing outer
race into transaxle case using Tool (A).
CAUTION:
Replace mainshaft rear bearing outer race and mainshaft
rear bearing inner race as a set.
8.
Install bushings (1) into transaxle case using suitable tool (A).
CAUTION:
Do not reuse bushings.
Tool number
: KV38100200 (
—
)
PCIB1724E
Tool number
: ST33220000 (
—
)
PCIB1721E
PCIB1729E
Tool number
: KV38100200 (
—
)
PCIB1728E
JPDIC0109ZZ
TM-696
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
TRANSAXLE ASSEMBLY
9.
Install oil gutter (1) onto transaxle case.
10. Install shifter lever oil seal (1) into transaxle case using suitable
tool (A).
11. Install selector lever oil seal and bushings into transaxle case
using suitable tool.
12. Install shift finger (1) into transaxle case.
13. Install selector lever (1) and then install retaining pin.
CAUTION:
Do not reuse retaining pin.
14. Install shim and differential side bearing outer race (transaxle
case side) into transaxle case using Tool (A).
CAUTION:
Replace differential side bearing inner race and differential
side bearing outer race as a set.
PCIB1730E
JPDIC0102ZZ
PCIB1712E
BCIA0047E
Tool number
: ST33400001 (
—
)
PCIB1726E
TRANSAXLE ASSEMBLY
TM-697
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
15. Install differential side bearing outer race (clutch housing side)
into clutch housing using Tool (A).
CAUTION:
Replace differential side bearing inner race and differential
side bearing outer race as a set.
16. Install differential side oil seals (1) into clutch housing and tran-
saxle case using Tool (A).
17. Install magnet onto clutch housing.
18. Install final drive assembly into clutch housing.
19. Install input shaft assembly (1), mainshaft assembly (2) and 1st-
2nd fork rod (3) into clutch housing.
20. Install spring washer located under the reverse idler shaft.
21. Install reverse gear assembly (1) according to the following.
a.
Lift up the input shaft assembly (2) and mainshaft assembly (3).
b.
Install reverse gear assembly and reverse fork rod (4) to clutch
housing.
22. Install 3rd-4th shift fork and 5th-6th shift fork to 3rd-4th and 5th-
6th fork rod.
Tool number
: KV38100200 (
—
)
PCIB1722E
Tool number
: KV38100300 (
—
)
B
: Transaxle case side
C
: Clutch housing side
Dimension “L
1
”
: 1.2 - 1.8 mm (0.047 - 0.071 in)
Dimension “L
2
”
: 2.7 - 3.3 mm (0.106 - 0.130 in)
JPDIC0120ZZ
PCIB1702E
PCIB1701E
TM-698
< DISASSEMBLY AND ASSEMBLY >
[6MT: RS6F94R]
TRANSAXLE ASSEMBLY
23. While lifting up fork rod (1), install 3rd-4th and 5th-6th fork rod
assembly to clutch housing.
CAUTION:
Replace the 5th-6th shift fork, the 3rd-4th shift fork, and the
3rd-4th and 5th-6th fork rod as a set.
24. Install retaining pin into 5th-6th shift fork using suitable tool.
CAUTION:
Do not reuse retaining pin.
25. Move 1st-2nd fork rod (1), 3rd-4th and 5th-6th fork rod assembly
(2), and reverse fork rod (3) to neutral position.
26. Install selector (4) into clutch housing.
27. Install spring of selector into return bushing.
28. Apply recommended sealant onto the mating surface of tran-
saxle case.
CAUTION:
• Remove old sealant adhering to the mating surfaces. Also
remove any moisture, oil, or foreign material adhering to
both mating surfaces.
• Check for damage on the mating surface.
• Use Genuine Liquid Gasket, Three Bond 1215 or an equiv-
alent
• Apply a continuous bead of liquid gasket to the mating surface.
29. Engage shift finger and selector by moving selector lever (1).
Install transaxle case to clutch housing.
PCIB1700E
PCIB1699E
SCIA7782E
JPDIC0110ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст