Nissan Tiida C11. Manual — part 779
CLIP AND FASTENER
EXT-11
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
CE107
CE117
CF110
CF118
CG101
CS101
Symbol
No.
Shapes
Removal & Installation
SBF411H
SBF767B
SBF174D
SBF175DA
SBF648B
SBF649B
SBF151D
SBF259G
SBF145B
SBF085B
SBF078B
SBF992G
EXT-12
< ON-VEHICLE REPAIR >
CLIP AND FASTENER
CR103
Metal Clip
Symbol
No.
Shapes
Removal & Installation
SBF768B
SBF770B
WBT072
WBT073
FRONT BUMPER
EXT-13
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
FRONT BUMPER
Removal and Installation
INFOID:0000000001568925
1.
Upper bumper reinforcement
2.
Upper bumper energy absorber
3.
Lower bumper reinforcement
4.
Lower bumper energy absorber
5.
Engine undercover
6.
Front bumper fascia
7.
Access cover
8.
Fog lamp opening finisher (without
fog lamps)
9.
Fog lamp opening finisher (with fog
lamps)
10. Fog lamp assembly
11.
Bumper molding
12. Bumper side retainer
A.
Clip C205
ALIIA0108GB
EXT-14
< ON-VEHICLE REPAIR >
FRONT BUMPER
CAUTION:
Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with
oil.
REMOVAL
1.
Open hood.
2.
Remove front grille. Refer to
EXT-19, "Removal and Installation"
3.
Remove front fender protectors RH/LH. Refer to
EXT-22, "Removal and Installation"
4.
Remove engine undercover.
5.
Remove screws of front bumper fascia RH/LH.
6.
Pull the outboard edge of front bumper fascia away from vehicle
to disengage from the bumper side retainer.
7.
Disconnect fog lamp harness connector RH/LH (if equipped).
8.
Remove the front bumper fascia.
9.
Remove fog lamp opening finisher and fog lamp assembly RH/
LH (if equipped). Refer to
EXT-13, "Removal and Installation"
10. Remove upper and lower bumper energy absorbers.
11. Remove RH/LH air guide mounting clips of bumper reinforcement.
12. Remove the nuts, then remove bumper reinforcement and bumper stay(s):
• For production, bumper stay LH is part of bumper reinforcement.
• For service, bumper stay RH/LH are separate assemblies.
13. Remove bumper side bracket RH/LH after front bumper fascia removal.
INSTALLATION
Installation is in the reverse order of removal.
PIIB2537J
PIIB2538J
PIIB2543J
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст