Nissan Tiida C11. Manual — part 780
REAR BUMPER
EXT-15
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
REAR BUMPER
Component
INFOID:0000000001568926
Hatchback Models
Removal and Installation - Hatchback
INFOID:0000000001568927
REMOVAL
1.
Open back door.
2.
Remove rear combination lamp RH/LH. Refer to
EXL-93, "Removal and Installation"
.
3.
Remove rear bumper fascia spring nuts and screws RH/LH.
4.
Remove rear fender protector. Refer to
EXT-22, "Removal and Installation"
AWKIA0102ZZ
1.
Bumper side bracket
2.
Rear bumper upper retainer
3.
Rear fender protector
4.
Spring nut
5.
Lower panel
6.
Rear bumper bracket
7.
Rear bumper reinforcement
8.
Energy absorbing foam
9.
Rear bumper molding RH/LH
10. Rear bumper fascia
A.
Clip C205
EXT-16
< ON-VEHICLE REPAIR >
REAR BUMPER
5.
Pull the rear bumper fascia side outward and release the
bumper side bracket.
6.
Remove rear bumper fascia upper clips and screws.
7.
Release rear bumper upper retainer (1), then pull rear bumper
fascia outward away from rear of vehicle.
8.
Disconnect license lamp connector.
9.
Remove energy absorbing foam and rear bumper reinforcement.
10. Remove the bumper side bracket (1) RH/LH.
INSTALLATION
Installation is in the reverse order of removal.
LIIA2579E
LIIA2580E
LIIA2581E
REAR BUMPER
EXT-17
< ON-VEHICLE REPAIR >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
Removal and Installation - Sedan
INFOID:0000000001568928
Sedan Models
REMOVAL
1.
Open trunk lid.
2.
Remove rear combination lamp RH/LH. Refer to
EXL-93, "Removal and Installation"
.
3.
Remove rear bumper fascia spring nuts and screws RH/LH.
4.
Remove rear fender protector. Refer to
EXT-22, "Removal and Installation"
5.
Pull the rear bumper fascia side outward and release the bumper side bracket.
6.
Remove rear bumper fascia upper clips and screws.
AWKIA0103ZZ
1.
Rear bumper upper retainer
2.
Rear fender protector
3.
Spring nut
4.
Bumper side bracket
5.
Lower panel
6.
Bumper reinforcement bracket
7.
Rear bumper reinforcement
8.
Energy absorbing foam
9.
Rear bumper molding RH,LH
10. Rear bumper fascia
11.
Rear bumper fog lamp (if equipped)
A.
Clip C205
EXT-18
< ON-VEHICLE REPAIR >
REAR BUMPER
7.
Release rear bumper upper retainer (1), then pull rear bumper
fascia outward away from rear of vehicle.
8.
Disconnect the rear fog lamp harness and remove the rear fog lamp.
9.
Remove energy absorbing foam and rear bumper reinforcement.
10. Remove the bumper side bracket (1) RH/LH.
INSTALLATION
Installation is in the reverse order of removal.
LIIA2580E
LIIA2921E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст