Nissan Tiida C11. Manual — part 174
DLK-106
< COMPONENT DIAGNOSIS >
[WITH I-KEY, WITHOUT SUPER LOCK]
UNLOCK SENSOR
2.
Check signal between Intelligent Key unit connector and ground
with oscilloscope.
Is the inspection result normal?
YES
>> GO TO 5
NO
>> Replace Intelligent Key unit.
XX-XX, "*****"
5.
CHECK UNLOCK SENSOR
DLK-106, "Component Inspection"
.
Is the inspection result normal?
YES
>> GO TO 6
NO
>> Replace front door lock actuator (driver side). Refer to
XX-XX, "*****"
.
6.
CHECK INTERMITTENT INCIDENT
Refer to
XX-XX, "*****"
.
>> INSPECTION END.
Component Inspection
INFOID:0000000001507336
1.
CHECK UNLOCK SENSOR
Check unlock sensor.
ALKIA0759ZZ
Terminals
Voltage (V)
(Approx.)
(+)
(–)
Intelligent Key unit connec-
tor
Terminal
M52
28
Ground
JPMIA0011GB
ALKIA0760ZZ
UNLOCK SENSOR
DLK-107
< COMPONENT DIAGNOSIS >
[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> INSPECTION END.
NO
>> Replace front lock assembly LH. Refer to
XX-XX, "*****"
.
Terminal
Front door lock actuator (driver side) condition
Continuity
Front door lock actuator (driver side)
4
5
Unlock
Yes
Lock
No
DLK-108
< COMPONENT DIAGNOSIS >
[WITH I-KEY, WITHOUT SUPER LOCK]
DOOR LOCK ACTUATOR
DOOR LOCK ACTUATOR
DRIVER SIDE
DRIVER SIDE : Description
INFOID:0000000001507385
Locks/unlocks the door with the signal from BCM.
DRIVER SIDE : Component Function Check
INFOID:0000000001507386
1.
CHECK FUNCTION
1.
Use CONSULT-III to perform Active Test "DOOR LOCK".
2.
Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-108, "DRIVER SIDE : Diagnosis Procedure"
.
DRIVER SIDE : Diagnosis Procedure
INFOID:0000000001507387
1.
CHECK DOOR LOCK ACTUATOR SIGNAL
1.
Turn ignition switch OFF.
2.
Check voltage between BCM connector M20 terminals 76, 77
and ground.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 3.
2.
CHECK DOOR LOCK ACTUATOR HARNESS
1.
Disconnect BCM and front door lock actuator (driver side).
ALKIA0772ZZ
Connector
Terminals
Condition
Voltage (V)
(Approx.)
(+)
(-)
M20
76
Ground
Driver door lock/unlock switch is
turned to UNLOCK
0
→
Battery voltage
→
0
77
Driver door lock/unlock switch is
turned to LOCK
0
→
Battery voltage
→
0
DOOR LOCK ACTUATOR
DLK-109
< COMPONENT DIAGNOSIS >
[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
2.
Check continuity between BCM connector (A) M20 terminals 76,
77 and front door lock actuator (driver side) connector (B) D14
terminals 2, 3.
Is the inspection result normal?
YES
>> Replace front door lock actuator (driver side).
NO
>> Repair or replace harness.
3.
CHECK DOOR LOCK ACTUATOR HARNESS
1.
Disconnect BCM and front door lock actuator (driver side).
2.
Check continuity between BCM connector M20 terminals 76, 77
and ground.
Is the inspection result normal?
YES
>> Replace BCM. Refer to
XX-XX, "*****"
.
NO
>> Repair or replace harness.
PASSENGER SIDE
PASSENGER SIDE : Description
INFOID:0000000001507382
Locks/unlocks the door with the signal from BCM.
PASSENGER SIDE : Component Function Check
INFOID:0000000001507383
1.
CHECK FUNCTION
1.
Use CONSULT-III to perform Active Test DOOR LOCK.
2.
Touch “ALL LOCK” or “ALL UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Door lock actuator is OK.
NO
>> Refer to
DLK-109, "PASSENGER SIDE : Diagnosis Procedure"
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000001507384
1.
CHECK FRONT DOOR LOCK ACTUATOR (PASSENGER SIDE) SIGNAL
1.
Turn ignition switch OFF.
Connector
Terminals
Connector
Terminals
Continuity
M20
76
D14
2
Yes
77
3
Yes
ALKIA0773ZZ
Connector
Terminals
Continuity
M20
76
Ground
No
77
No
ALKIA0774ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст