Nissan Tiida C11. Manual — part 768
EXL-70
< COMPONENT DIAGNOSIS >
BACK-UP LAMP
BACK-UP LAMP
Wiring Diagram
INFOID:0000000001523284
ALLWA0055GB
BCM (BODY CONTROL MODULE)
EXL-71
< ECU DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
ECU DIAGNOSIS
BCM (BODY CONTROL MODULE)
Description
INFOID:0000000001523285
REFERENCE VALUES FOR BCM
For BCM reference values, refer to
XX-XX, "*****"
.
TERMINAL LAYOUT FOR BCM
For the terminal layout for the BCM, refer to
XX-XX, "*****"
.
PHYSICAL VALUES FOR BCM
For physical values for the BCM, refer to
XX-XX, "*****"
.
WIRING DIAGRAM - BCM
For the BCM wiring diagram, refer to
XX-XX, "*****"
.
FAIL SAFE - BCM
For BCM fail safe information, refer to
XX-XX, "*****"
.
DTC INSPECTION PRIORITY CHART - BCM
For the BCM DTC inspection priority chart, refer to
XX-XX, "*****"
.
DTC INDEX - BCM
For the BCM DTC index, refer to
XX-XX, "*****"
.
EXL-72
< ECU DIAGNOSIS >
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE
ROOM)
Description
INFOID:0000000001523286
REFERENCE VALUES FOR IPDM E/R
For IPDM E/R reference values, refer to
XX-XX, "*****"
.
TERMINAL LAYOUT FOR IPDM E/R
For the terminal layout for the IPDM E/R, refer to
XX-XX, "*****"
.
PHYSICAL VALUES FOR IPDM E/R
For physical values for the IPDM E/R, refer to
XX-XX, "*****"
.
WIRING DIAGRAM - IPDM E/R
For the IPDM E/R wiring diagram, refer to
XX-XX, "*****"
.
FAIL SAFE - IPDM E/R
For IPDM E/R fail safe information, refer to
XX-XX, "*****"
.
DTC INSPECTION PRIORITY CHART - IPDM E/R
For the IPDM E/R DTC inspection priority chart, refer to
DTC INDEX - IPDM E/R
For the IPDM E/R DTC index, refer to
XX-XX, "*****"
.
EXTERIOR LIGHTING SYSTEM SYMPTOMS
EXL-73
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
SYMPTOM DIAGNOSIS
EXTERIOR LIGHTING SYSTEM SYMPTOMS
Symptom Table
INFOID:0000000001523287
CAUTION:
Perform the self-diagnosis with CONSULT-III before the symptom diagnosis. Perform the trouble diag-
nosis if any DTC is detected.
Symptom
Possible cause
Inspection item
Headlamp does not
switch to the high beam.
One side
• Fuse
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
(High beam relay)
• IPDM E/R
Headlamp (HI) circuit
Refer to
.
Both sides
Symptom diagnosis
"BOTH SIDE HEADLAMPS DO NOT SWITCH TO HIGH BEAM"
Refer to
High beam indicator lamp is not turned ON.
(Headlamp switches to the high beam.)
• Combination meter
• BCM
• Combination meter.
Data monitor "HI-BEAM IND"
• BCM (HEAD LAMP)
Active test "HEADLAMP"
Headlamp does not
switch to the low beam.
One side
Front combination lamp (Low
beam relay)
—
Both sides
• Combination switch
• Harness between the combina-
tion switch and BCM
• BCM
Combination switch
Refer to
XX-XX, "*****"
.
High beam request signal
• BCM
• IPDM E/R
IPDM E/R
Data monitor "HL HI REQ"
IPDM E/R
—
Headlamp does not turn
ON.
One side
• Fuse
• Bulb
• Harness between IPDM E/R
and the front combination lamp
• Front combination lamp
• IPDM E/R
Headlamp (LO) circuit
Refer to
.
Both sides
Symptom diagnosis
"BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON"
Refer to
.
Headlamp does not turn
OFF.
When the ignition
switch is turned ON
• BCM
• Combination switch
Combination switch
Refer to
XX-XX, "*****"
.
The ignition switch is
turned OFF (After acti-
vating the battery sav-
er).
IPDM E/R
—
Headlamp is not turned ON/OFF with the lighting
switch AUTO.
• Combination switch
• Harness between the combina-
tion switch and BCM
• BCM
Combination switch
Refer to
XX-XX, "*****"
.
• Light & rain sensor
• Harness between the light &
rain sensor and BCM
• BCM
light & rain sensor
Refer to
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст