Nissan Tiida C11. Manual — part 299
DLK-606
< REMOVAL AND INSTALLATION >
[WITHOUT I-KEY & SUPER LOCK]
BACK DOOR LOCK
BACK DOOR LOCK
Removal and Installation
INFOID:0000000001732048
BACK DOOR LOCK
Removal
1.
Remove the back door finisher lower. Refer to
XX-XX, "*****"
.
2.
Remove the bolts, disconnect the electrical connector and sepa-
rate the lock from the door.
Installation
Installation is in the reverse order of removal.
BACK DOOR HANDLE
Removal
1.
Remove the back door finisher lower. Refer to
XX-XX, "*****"
.
2.
Disconnect the harness connectors (1), remove the nuts and the
back door handle (A).
3.
Release the clips and remove the switch from the housing.
Installation
Installation is in the reverse order of removal.
LIIA2607E
LIIA2669E
LIIA2609E
TRUNK LID
DLK-607
< REMOVAL AND INSTALLATION >
[WITHOUT I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
TRUNK LID
Fitting Adjustment
INFOID:0000000001732049
Longitudinal and lateral clearance adjustment
1.
With the striker released, loosen the trunk lid hinge nuts and close the trunk lid.
2.
Make the lateral clearance and the clearance to the rear window glass equal. Then open the trunk lid to
tighten the nuts.
Surface height adjustment
1.
Loosen the striker bolts. Raise the striker to the top position, and temporarily tighten the upper bolt.
2.
Close the trunk lid lightly and adjust the surface height. Then open the trunk lid and tighten the striker
bolts.
Trunk Lid Assembly
INFOID:0000000001732050
REMOVAL
1.
Remove the trunk lid finisher. Refer to
XX-XX, "*****"
.
2.
Remove the trunk lid wire harness.
1.
Rear fender
2.
Trunk lid
3.
Rear combination lamp
4.
Rear bumper fascia
a.
4.0
±
1.0 mm (0.16
±
0.04 in)
b.
3.5
±
1.0 mm (0.14
±
0.04 in)
c.
4.5
±
1.7 mm (0.03
±
0.06 in)
d.
7.0
±
2.2 mm (0.28
±
0.09 in)
LIIA2932E
DLK-608
< REMOVAL AND INSTALLATION >
[WITHOUT I-KEY & SUPER LOCK]
TRUNK LID
3.
Remove the nuts (a) and the trunk lid assembly (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installing, apply touch-up paint (body color) to the head of the hinge nuts.
Trunk Lid Lock
INFOID:0000000001732051
REMOVAL
1.
Remove the trunk lid finisher. Refer to
XX-XX, "*****"
.
2.
If equipped, disconnect the trunk lid lock cylinder rod.
3.
Remove the release cable.
4.
Disconnect the electrical connector (a), remove the bolts (b) and
the trunk lid lock (1).
INSTALLATION
Installation is in the reverse order of removal.
Trunk Lid Striker
INFOID:0000000001732052
REMOVAL
1.
Remove the trunk rear plate and trunk rear finisher. Refer to
XX-XX, "*****"
.
2.
Remove the bolts, disconnect the electrical connector and remove the trunk lock actuator.
3.
Remove the bolt and disconnect the trunk lid release cable.
LIIA2933E
LIIA2935E
TRUNK LID
DLK-609
< REMOVAL AND INSTALLATION >
[WITHOUT I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
4.
Remove the bolts (a) and the trunk lid striker (1).
INSTALLATION
Installation is in the reverse order of removal.
LIIA2934E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст