Nissan Tiida C11. Manual — part 257
DLK-438
< PRECAUTION >
[WITH I-KEY & SUPER LOCK]
PRECAUTIONS
5.
When the repair work is completed, re-connect both battery cables. With the brake pedal released, turn
the push-button ignition switch from ACC position to ON position, then to LOCK position. (The steering
wheel will lock when the push-button ignition switch is turned to LOCK position.)
6.
Perform self-diagnosis check of all control units using CONSULT-III.
Work
INFOID:0000000001396897
• After removing and installing the opening/closing parts, be sure to carry out fitting adjustments to check their
operational.
• Check the lubrication level, damage, and wear of each part. If necessary, grease or replace it.
PREPARATION
DLK-439
< PREPARATION >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
PREPARATION
PREPARATION
Commercial Service Tools
INFOID:0000000001396898
Tool name
Description
Engine ear
Locating the noise
Remover tool
Remove the clips, pawls, and metal clips
Power tool
Removing nuts and bolts
SIIA0995E
PIIB7923J
PIIB1407E
DLK-440
< ON-VEHICLE MAINTENANCE >
[WITH I-KEY & SUPER LOCK]
PRE-INSPECTION FOR DIAGNOSTIC
ON-VEHICLE MAINTENANCE
PRE-INSPECTION FOR DIAGNOSTIC
Basic Inspection
INFOID:0000000001396899
BASIC INSPECTION
1.
CHECK POWER DOOR LOCK AND UNLOCK SWITCH OPERATION
Check door lock and unlock operation by operating door lock and unlock switch.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> Refer to
XX-XX, "*****"
.
2.
CHECK INTELLIGENT KEY OPERATION
Check door lock and unlock operation by operating the Intelligent Key remote control button.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Refer to
XX-XX, "*****"
.
3.
CHECK DOOR REQUEST SWITCH OPERATION
Check door lock and unlock operation by operating door request switch.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Refer to
XX-XX, "*****"
.
4.
CHECK KEY REMINDER OPERATION
Check key reminder operation. Refer to
DLK-255, "KEY REMINDER : System Description"
.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Refer to
XX-XX, "*****"
.
5.
CHECK AUTO DOOR LOCK OPERATION
Check auto door lock operation. Refer to
XX-XX, "*****"
.
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Refer to
XX-XX, "*****"
.
6.
CHECK VEHICLE SPEED SENSING AUTO DOOR LOCK OPERATION
Check vehicle speed sensing auto door lock operation. Refer to
XX-XX, "*****"
.
Is the inspection result normal?
YES
>> GO TO 7.
NO
>> Refer to
XX-XX, "*****"
.
7.
CHECK BACK DOOR OPENER OPERATION
Check back door opener operation by operating the back door opener switch.
Is the inspection result normal?
YES
>> GO TO 8.
NO
>> Refer to
XX-XX, "*****"
.
8.
CHECK WARNING FUNCTION
Check warning function. Refer to
.
Is the inspection result normal?
YES
>> GO TO 9.
NO [Buzzer (combination meter)]>> Refer to
XX-XX, "*****"
.
NO (Intelligent Key warning buzzer)>> Refer to
XX-XX, "*****"
.
PRE-INSPECTION FOR DIAGNOSTIC
DLK-441
< ON-VEHICLE MAINTENANCE >
[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
NO (Warning lamp)>> Refer to
XX-XX, "*****"
.
NO (Back door open warning)>> Refer to
XX-XX, "*****"
.
9.
CHECK HAZARD AND BUZZER REMINDER FUNCTION
Check hazard and buzzer reminder function by Intelligent Key or request switch. Refer to
.
Is the inspection result normal?
YES
>> GO TO 10.
NO (Hazard warning lamp)>> Refer to
XX-XX, "*****"
.
NO (Intelligent Key warning buzzer)>> Refer to
XX-XX, "*****"
.
10.
CHECK OUT
CHECK OUT.
>> INSPECTION END
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст