Nissan Tiida C11. Manual — part 697
EM-140
< PREPARATION >
[MR18DE]
PREPARATION
Commercial Service Tool
INFOID:0000000001337773
(Kent-Moore No.)
Tool name
Description
(BT-3373-F)
Belt tension gauge
Checking drive belt tension
Power tool
Loosening bolts and nuts
Spark plug wrench
Removing and installing spark plug
Valve seat cutter set
Finishing valve seat dimensions
Piston ring expander
Removing and installing piston ring
KV10109300
(
—
)
Pulley holder
Removing and installing crankshaft pulley
AMA126
PBIC0190E
PBIC2982E
NT048
NT030
NT628
PREPARATION
EM-141
< PREPARATION >
[MR18DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
KV10111800
Valve guide drift
Removing and installing valve guide
Valve guide reamer
(1): Reaming valve guide inner hole
(2): Reaming hole for oversize valve guide
(J-43897-18)
(J-43897-12)
Oxygen sensor thread cleaner
Reconditioning the exhaust system threads
before installing a new oxygen sensor (Use
with anti-seize lubricant shown below.)
a: J-43897-18 (18 mm dia.) for zirconia ox-
ygen sensor
b: J-43897-12 (12 mm dia.) for titania oxy-
gen sensor
Anti-seize lubricant (Permatex 133AR
or equivalent meeting MIL specifica-
tion MIL-A-907)
Lubricating oxygen sensor thread cleaning
tool when reconditioning exhaust system
threads
E20 Torx® Socket
(J-45816)
Removing and installing drive plate and fly-
wheel bolts
(Kent-Moore No.)
Tool name
Description
PBIC4012E
PBIC4013E
AEM488
AEM489
LBIA0285E
EM-142
< ON-VEHICLE MAINTENANCE >
[MR18DE]
DRIVE BELTS
ON-VEHICLE MAINTENANCE
DRIVE BELTS
Component
INFOID:0000000001337776
Checking Drive Belts
INFOID:0000000001337777
WARNING:
Be sure to perform this step when the engine is stopped.
• Make sure that the indicator (notch on fixed side) of drive belt auto-tensioner is within the possible use range
(A).
NOTE:
• Check the drive belt auto-tensioner indication when the engine is cold.
• When new drive belt is installed, the indicator (notch on fixed side) should be within the range (B).
• Visually check entire drive belt for wear, damage or cracks.
• If the indicator (notch on fixed side) is out of the possible use range or belt is damaged, replace drive belt.
Tension Adjustment
INFOID:0000000001337778
Belt tension is not necessary, as it is automatically adjusted by drive belt auto-tensioner.
Removal and Installation
INFOID:0000000001337779
REMOVAL
1.
Hold the hexagonal part (A) of drive belt auto-tensioner (1) with
a wrench securely. Then move the wrench handle in the direc-
tion of arrow (loosening direction of tensioner).
CAUTION:
Never place hand in a location where pinching may occur if
the holding tool accidentally comes off.
2.
Insert a rod such as short-length screwdriver approximately 6
mm (0.24 in) in diameter into the hole (B) of the retaining boss to
fix drive belt auto-tensioner.
3.
Remove drive belt.
INSTALLATION
1.
Generator
2.
Drive belt auto–tensioner
3.
Crankshaft pulley
4.
A/C compressor (models with A/C)
Idler pulley (models without A/C)
5.
Water pump
6.
Drive belt
A.
Possible use range
B.
Range when new drive belt is installed C.
Indicator
PBIC3137J
PBIC3936E
DRIVE BELTS
EM-143
< ON-VEHICLE MAINTENANCE >
[MR18DE]
C
D
E
F
G
H
I
J
K
L
M
A
EM
N
P
O
1.
Hold the hexagonal part (A) of drive belt auto-tensioner (1) with
a box wrench securely. Then move the wrench handle in the
direction of arrow (loosening direction of tensioner).
CAUTION:
Never place hand in a location where pinching may occur if
the holding tool accidentally comes off.
2.
Insert a rod such as short-length screwdriver approximately 6
mm (0.24 in) in diameter into the hole (B) of retaining boss to fix
drive belt auto-tensioner.
3.
Install drive belt.
CAUTION:
• Confirm drive belt is completely set to pulleys.
• Check for engine oil, working fluid and engine coolant are not adhered to drive belt and each
pulley groove.
4.
Release drive belt auto-tensioner, and apply tension to drive belt.
5.
Turn crankshaft pulley clockwise several times to equalize tension between each pulley.
6.
Confirm tension of drive belt at indicator (notch on fixed side) is within the possible use range. Refer to
EM-142, "Checking Drive Belts"
.
PBIC3936E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст