Nissan Frontier. Manual — part 804
HEADLAMP
EXL-141
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REMOVAL AND INSTALLATION
HEADLAMP
Bulb Replacement
INFOID:0000000009478523
WARNING:
Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.
CAUTION:
Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to the bulb.Do not leave bulb out of lamp reflector for a long time because dust, moisture,
smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new
one.
HEADLAMP
Removal
1. Turn front headlamp switch OFF.
2. Disconnect the harness connector from the headlamp.
3. Rotate the headlamp bulb retaining ring counterclockwise and remove.
4. Pull the headlamp bulb straight out from the headlamp assembly.
CAUTION:
Grasp only the plastic base when handling headlamp bulb. Do not touch the glass envelope.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing bulb, be sure to install the bulb socket and plastic cap securely to ensure watertight-
ness.
FRONT TURN SIGNAL/PARKING LAMP
Removal
1. Turn the bulb socket counterclockwise and remove.
2. Pull the bulb to remove it from the socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing bulb, be sure to install the bulb socket and plastic cap securely to ensure watertight-
ness.
FRONT SIDE MARKER LAMP
Removal
1. Turn the bulb socket counterclockwise and remove.
2. Pull the bulb to remove it from the socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing bulb, be sure to install the bulb socket securely for watertightness.
Removal and Installation
INFOID:0000000009478524
FRONT COMBINATION LAMP
Removal
1. Position front fender protector aside. Refer to
EXT-27, "Removal and Installation of Front Fender Protec-
2. For steel bumper, remove the front bumper upper valance. Refer to
EXT-15, "Removal and Installation"
.
3. For plastic bumper, remove the front bumper assembly. Refer to
EXT-15, "Removal and Installation"
.
EXL-142
< REMOVAL AND INSTALLATION >
HEADLAMP
4. Remove the front combination lamp bolts.
5. Disconnect the harness connector from the front combination lamp and remove.
Installation
Installation is in the reverse order of removal.
NOTE:
After installation, perform headlamp aiming adjustment. Refer to
.
Disassembly and Assembly
INFOID:0000000009478525
DISASSEMBLY
WARNING:
Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.
CAUTION:
Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent
damage to the bulb.Do not leave bulb out of lamp reflector for a long time because dust, moisture,
smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new
one.
1. Rotate headlamp bulb retaining ring counterclockwise and remove.
2. Turn front turn signal/parking lamp bulb socket counterclockwise to unlock and remove.
3. Turn front side marker lamp bulb socket counterclockwise to unlock and remove.
ASSEMBLY
Installation is in the reverse order of removal.
CAUTION:
After installing bulb, be sure to install the bulb socket and plastic cap securely to ensure watertight-
ness.
Front combination lamp bolt
: 6.0 N·m (0.61 kg-m, 53 in-lb)
AWKIA1437GB
1. Front combination lamp
2. Headlamp bulb
3. Headlamp bulb retaining ring
4. Harness assembly
5. Front side marker lamp bulb
6. Front turn signal/parking lamp bulb
FRONT FOG LAMP
EXL-143
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
FRONT FOG LAMP
Bulb Replacement
INFOID:0000000009478526
REMOVAL
1. Position front fender protector aside. Refer to
EXT-27, "Removal and Installation of Front Fender Protec-
2. Disconnect the harness connector from the fog lamp.
3. Turn the bulb counterclockwise to remove it.
WARNING:
Do not touch bulb by hand while it is lit or right after being
turned off. Burning may result.
CAUTION:
• Do not touch the glass of bulb directly by hand. Keep
grease and other oily substances away from it.
• Do not leave bulb out of fog lamp reflector for a long time
because dust, moisture smoke, etc. may affect the perfor-
mance of fog lamp. When replacing bulb, be sure to
replace it with new one.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000009478527
REMOVAL
Note:
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.
1. Position front fender protector aside. Refer to
EXT-27, "Removal and Installation of Front Fender Protec-
2. Disconnect the harness connector from the fog lamp.
3. Remove fog lamp screws and pull fog lamp rearward out of front
bumper.
CAUTION:
• Do not leave fog lamp assembly without bulb for a long
period of time. Dust, moisture, smoke, etc. entering the
fog lamp body may affect the performance. Remove the
bulb from the headlamp assembly just before replace-
ment bulb is installed.
• Grasp only the plastic base when handling the bulb. Do
not touch the glass envelope. Touching the glass could
significantly affect the bulb life and/or fog lamp perfor-
mance.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
After installation, perform front fog lamp aiming adjustment. Refer to
.
LKIA0573E
LKIA0660E
EXL-144
< REMOVAL AND INSTALLATION >
STOP LAMP
STOP LAMP
Bulb Replacement
INFOID:0000000009478528
HIGH-MOUNTED STOP LAMP
Removal
1. Remove high-mounted stop lamp. Refer to
EXL-144, "Removal and Installation"
2. Rotate the center bulb socket counterclockwise and remove.
3. Pull bulb straight out from bulb socket.
Installation
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000009478529
HIGH-MOUNTED STOP LAMP
Removal
1. Remove plugs on headlining.
2. Remove the nuts and remove high-mounted stop lamp from out-
side of roof outer panel.
3. Rotate the bulb sockets counterclockwise and remove the high-
mounted stop lamp assembly.
Installation
Installation is in the reverse order of removal.
WKIA3545E
WKIA3782E
High-mounted stop lamp nuts
: 3.38 N·m (0.34 kg-m, 30 in-lb)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст