Nissan Frontier. Manual — part 805
LICENSE PLATE LAMP
EXL-145
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LICENSE PLATE LAMP
Bulb Replacement
INFOID:0000000009478530
REMOVAL
1. Turn bulb socket counterclockwise to unlock bulb socket.
2. Pull bulb to remove from bulb socket.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000009478531
REMOVAL
1. Disconnect the harness connector from the license plate lamp.
2. Depress tab to remove license plate lamp from rear bumper.
INSTALLATION
Installation is in the reverse order of removal.
EXL-146
< REMOVAL AND INSTALLATION >
REAR COMBINATION LAMP
REAR COMBINATION LAMP
Bulb Replacement
INFOID:0000000009478532
REMOVAL
1. Remove rear combination lamp. Refer to
2. Turn bulb socket counterclockwise to remove..
3. Pull bulb straight out away from socket.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
INFOID:0000000009478533
REMOVAL
1. Open tail gate and remove rear combination lamp bolts.
2. Pull combination lamp housing rearward to release locating
snap.
3. Rotate each bulb socket counterclockwise and remove.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
During installation, align locating snap on body prior to installing bolts.
WKIA3780E
WKIA3781E
Rear combination lamp bolts
: 2.4 Nm (0.24 kg-m, 21 in-lb)
LIGHTING & TURN SIGNAL SWITCH
EXL-147
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
LIGHTING & TURN SIGNAL SWITCH
Removal and Installation
INFOID:0000000009478534
REMOVAL
1. Remove instrument lower panel LH. Refer to
IP-18, "Removal and Installation"
2. Remove steering column covers.
3. Disconnect the harness connector from the lighting and turn sig-
nal switch.
4. While pressing tabs, pull lighting and turn signal switch toward
driver door and release from the steering column.
INSTALLATION
Installation is in the reverse order of removal.
LKIA0013E
EXL-148
< REMOVAL AND INSTALLATION >
HAZARD SWITCH
HAZARD SWITCH
Removal and Installation
INFOID:0000000009478535
REMOVAL
1. Remove cluster lid C. Refer to
IP-19, "Removal and Installation"
2. Remove the screws and the hazard switch.
INSTALLATION
Installation is in the reverse order of removal.
LKIA0575E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст