Nissan Frontier. Manual — part 272
DLK-134
< REMOVAL AND INSTALLATION >
DOOR
2. Remove the upper striker covers and adjust the striker so that it
becomes parallel with the lock insertion direction.
Removal and Installation
INFOID:0000000009478957
KING CAB
Front Door
REMOVAL
CAUTION:
• When removing and installing the door assembly, support the door with a jack and shop cloth to pro-
tect the door and body.
• When removing and installing door assembly, be sure to carry out the fitting adjustment.
• Check the hinge rotating part for poor lubrication. If necessary, apply body grease.
1. Remove the front door glass and regulator assembly. Refer to
GW-16, "Front Door Glass Regulator"
2. Remove the door harness.
3. Remove the check link cover.
4. Remove the check link bolt from the hinge pillar.
5. Remove the door-side hinge nuts and bolts, and remove the
door assembly.
INSTALLATION
Installation is in the reverse order of removal.
Rear Door
REMOVAL
CAUTION:
Striker bolts
: 16.7 N·m (1.7 kg–m, 12 ft–lb)
AWKIA1807ZZ
Check link bolt to
hinge pillar
: 14.7 N·m (1.5 kg-m, 11 ft-lb)
LIIA1967E
LIIA1504E
DOOR
DLK-135
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
• When removing and installing the door assembly, support the door with a jack and shop cloth to pro-
tect the door and body.
• When removing and installing door assembly, be sure to carry out the fitting adjustment.
• Check the hinge rotating part for poor lubrication. If necessary, apply body grease.
1. Remove the door glass. Refer to
2. Remove the speaker.
3. Remove the door handles and latch assembly. Refer to
DLK-140, "Component Structure"
4. Remove the check link.
5. Remove the harness.
6. Remove the door assembly.
INSTALLATION
Installation is in the reverse order of removal.
CREW CAB
REMOVAL
CAUTION:
• When removing and installing the door assembly, support the door with a jack and shop cloth to pro-
tect the door and body.
• When removing and installing door assembly, be sure to carry out the fitting adjustment.
• Check the hinge rotating part for poor lubrication. If necessary, apply body grease.
1. Remove the inner seal.
2. Remove the door glass and regulator assembly. Refer to
3. Remove the door harness.
4. Remove the check link cover.
Door hinge nuts
: 24.5 N·m (2.5 kg–m, 18 ft–lb)
Check link bolt to door : 6.1 N·m (0.62 kg–m, 54 in–lb)
LIIA1968E
DLK-136
< REMOVAL AND INSTALLATION >
DOOR
5. Remove the check link bolt from the hinge pillar.
6. Remove the door-side hinge nuts and bolts, and remove the
door assembly.
INSTALLATION
Installation is in the reverse order of removal.
Front door check link
bolt to hinge pillar
: 14.7 N·m (1.5 kg–m, 11 ft - lb)
Rear door check link
bolt to hinge pillar
: 14.7 N·m (1.5 kg–m, 11 ft - lb)
LIIA1967E
LIIA1504E
FRONT DOOR LOCK
DLK-137
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FRONT DOOR LOCK
Component Structure
INFOID:0000000009478958
Removal and Installation
INFOID:0000000009478959
REMOVAL
1. Remove the front door window regulator. Refer to
GW-16, "Front Door Glass Regulator"
2. Remove door side grommet, and remove door key cylinder assembly (driver side) or outside handle
escutcheon (passenger side) bolts (1) from grommet hole.
(2): Weatherstrip
CAUTION:
Do not forcibly remove the bolts (T30).
3. Separate the key cylinder rod from the key cylinder assembly.
1.
Grommet
2.
Front door striker
3.
Door lock assembly
4.
Outside handle cable
5.
Inside handle assembly
6.
Inside handle cable
7.
Door lock cable
8.
Key cylinder rod (Driver side only)
9.
Door key cylinder
10. Outside handle bracket
11. Front gasket
12. Outside handle
13. Door key cylinder assembly (Driver
side) Outside handle escutcheon
(Passenger side)
14. Rear gasket
Front
AWKIA1793GB
Bolt
5.3 N·m (0.54 kg-m, 47 in-lb)
AWKIA2017ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст