Nissan Frontier. Manual — part 1272
KEY INTERLOCK CABLE
TM-299
< REMOVAL AND INSTALLATION >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
4. Insert key interlock rod (A) into adjuster holder (B).
5. Install casing cap (C) to bracket (D).
6. Move slider (E) toward key interlock rod (A) to secure adjuster
holder (B) to key interlock rod (A).
7. Install instrument lower panel LH. Refer to
.
8. Install lower glove box. Refer to
.
9. Install A/T finisher. Refer to
JSDIA0698ZZ
TM-300
< REMOVAL AND INSTALLATION >
[5AT: RE5R05A]
AIR BREATHER HOSE
AIR BREATHER HOSE
Removal and Installation for QR25DE Engine
INFOID:0000000009480685
COMPONENTS
REMOVAL
1. Release air breather hose from clip.
2. Disconnect air breather hose from transmission tube.
3. Disconnect air breather hose from air breather tube.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
• Install air breather hose with paint mark at upper side.
• When installing the air breather hose, do not crush or block by folding or bending the hose.
• When inserting the hose to the transmission tube, be sure to insert it fully until its end reaches the
tube bend portion.
• Make sure clip is securely installed to bracket.
Removal and Installation for VQ40DE Engine
INFOID:0000000009480686
COMPONENTS (2WD MODELS)
LCIA0395E
AIR BREATHER HOSE
TM-301
< REMOVAL AND INSTALLATION >
[5AT: RE5R05A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
REMOVAL (2WD MODELS)
1. Release air breather hose from clip.
2. Disconnect air breather hose from transmission tube.
3. Disconnect air breather hose from air breather tube.
INSTALLATION (2WD MODELS)
Installation is in the reverse order of removal.
CAUTION:
• Install air breather hose with paint mark at upper side.
• When installing the air breather hose, do not crush or block by folding or bending the hose.
• When inserting the hose to the transmission tube, be sure to insert it fully until its end reaches the
tube bend portion.
• Make sure clip is securely installed to bracket.
COMPONENTS (4WD)
LCIA0389E
TM-302
< REMOVAL AND INSTALLATION >
[5AT: RE5R05A]
AIR BREATHER HOSE
REMOVAL (4WD MODELS)
1. Release air breather hose from clip.
2. Disconnect air breather hose from transmission tube.
3. Disconnect air breather hose from air breather tube.
INSTALLATION (4WD MODELS)
Installation is in the reverse order of removal.
CAUTION:
• Install air breather hose with paint mark at upper side.
• When installing the air breather hose, do not crush or block by folding or bending the hose.
• When inserting the hose to the transmission tube, be sure to insert it fully until its end reaches the
tube bend portion.
• Make sure clip is securely installed to bracket.
LCIA0390E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст