Nissan Frontier. Manual — part 305

DLN-122

< UNIT DISASSEMBLY AND ASSEMBLY >

[TRANSFER: TX15B]

PLANETARY CARRIER

Check the internal gear teeth for damage, partial wear, dents or

other abnormality. If any is found, replace the internal gear with a

new one.

ASSEMBLY

1. Apply ATF to the new metal bushing, then install the new metal

bushing until it becomes Dimension (A) using Tool.

CAUTION:

Do not reuse metal bushing.

2. Apply ATF to the new needle bearing, then install the new nee-

dle bearing until it becomes Dimension (B) using Tool.

CAUTION:

Do not reuse needle bearing.

3. Install the carrier bearing to the sun gear using Tools.

4. Install the new snap ring to the sun gear assembly using suitable

tool.

CAUTION:

Do not reuse snap ring.

PDIA0157E

Tool number

: ST35300000 ( — )

Dimension (A)

: 7.7 - 8.3mm (0.303 - 0.327in)

SDIA3189E

Tool number

: ST33220000 ( — )

Dimension (B)

: 62.5 - 63.1mm (2.461 - 2.484in)

SDIA3190E

Tool number

(A): ST30720000 (J-25405)
(B): ST27863000 ( — )

PDIA0149E

SDIA2353E

PLANETARY CARRIER

DLN-123

< UNIT DISASSEMBLY AND ASSEMBLY >

[TRANSFER: TX15B]

C

E

F

G

H

I

J

K

L

M

A

B

DLN

N

O

P

5. Install the sun gear assembly to the planetary carrier assembly.
6. Install the new snap ring to the planetary carrier assembly.

CAUTION:

Do not reuse snap ring.

SDIA2794E

DLN-124

< UNIT DISASSEMBLY AND ASSEMBLY >

[TRANSFER: TX15B]

FRONT DRIVE SHAFT

FRONT DRIVE SHAFT

Disassembly and Assembly

INFOID:0000000009479721

DISASSEMBLY

1. Remove the front bearing using Tools.

2. Remove the rear bearing using Tools.

INSPECTION AFTER DISASSEMBLY

Front Drive Shaft

Check the items below. If necessary, replace them with new ones.

• Damage, peeling, dent, uneven wear and bending of the shaft.

• Excessive wear, damage and peeling of the gear.

Bearing

Check the bearing for damage and rough rotation. If necessary,

replace the bearing with a new one.

ASSEMBLY

Tool number

(A): ST35300000 ( — )
(B): ST30021000 (J-22912-01)

SDIA2106E

Tool number

(A): ST33710000 ( — )
(B): ST30021000 (J-22912-01)

PDIA0153E

PDIA0154E

MTF0041D

FRONT DRIVE SHAFT

DLN-125

< UNIT DISASSEMBLY AND ASSEMBLY >

[TRANSFER: TX15B]

C

E

F

G

H

I

J

K

L

M

A

B

DLN

N

O

P

1. Install the rear bearing using Tools.

2. Install the front bearing using Tools.

Tool number

(A): KV38100500 ( — )
(B): ST30901000 (J-26010-01)

PDIA0155E

Tool number

(A): KV38100500 ( — )
(B): ST30901000 (J-26010-01)

PDIA0156E